An input lag investigation

RetroArch General
#188

May I ask a last question ? Did you measure any input lag difference with the video_threaded option ?

Thanks again ! I’m happy to know I can tweak one more setting :slight_smile:

Edit : value of 7 seems OK for Neo Geo and SNES on the Pi 3. I’ll try to pay more attention to subtle sound distortion and try more demanding titles. Edit : after further tests on Pi 3 / RetroPie : frame delay of 9 seems ok for Neo Geo & PSX, 5 for the SNES, 10 for the PC Engine & Megadrive (on Pi 3). No Edit : final values : SNES : 4 // Neo Geo & PSX : 9 / PC Engine : 9 // Megadrive : 10

#189

Nope, I haven’t. I may give it a shot, but don’t count on it. Getting a bit sick of testing right now, to be honest. :stuck_out_tongue:

[QUOTE=bidinou;41847]Edit : value of 7 seems OK for Neo Geo and SNES on the Pi 3. I’ll try to pay more attention to subtle sound distortion and try more demanding titles. Edit : after further tests on Pi 3 / RetroPie : frame delay of 9 seems ok for Neo Geo & PSX, 5 for the SNES, 10 for the PC Engine & Megadrive (on Pi 3). No[/QUOTE] Thanks for testing. Give Yoshi’s Island a try. It’s a SuperFX game and it seems pretty demanding. It was the only game where I noticed slowdown on the Pi 2. Even if the Pi 3 is decent amount faster, there can’t be a huge margin left for frame delay.

#190

Indeed, there is a slight slowdown on the menu with a frame delay of 5. It’s OK with 4. I give up to set this for MAME games :slight_smile:

#191

Think it’s time to try RetroPie, Recalbox or Lakka again. Are the fixes to the emualtors already in the repository or do I have to manualy update them?

#192

Just made a pull request for implementing the exact same fix for bsnes as bsnes-mercury: https://github.com/libretro/bsnes-libretro/pull/16

Hopefully they’ll both be merged very soon. :slight_smile:

[QUOTE=xadox;41852]Think it’s time to try RetroPie, Recalbox or Lakka again. Are the fixes to the emualtors already in the repository or do I have to manualy update them?[/QUOTE] I know RetroPie binaries have been updated with the fix for fceumm, but otherwise I’m not sure.

#193

[QUOTE=xadox;41852]Think it’s time to try RetroPie, Recalbox or Lakka again. Are the fixes to the emualtors already in the repository or do I have to manualy update them?[/QUOTE] for retropie, you’ll have to update lr-fceumm and lr-snes9x-next via the retropie setup script via binaries.

#194

Thanks brunnis. On Gsync it feels pretty reactive already.

#195

You know what I’m doing now (well, in 10 secs)? Actually gaming, not performance testing, on my RetroPie setup. :smiley:

#196

What settings are you using on your Raspberry Pi to get minimal input lag in addition to the emulator lag fixes?

These are my settings:

Raspberry Pi 3 [B]arm_freq=1200 core_freq=500 sdram_freq=500 gpu_freq=400

runcommand.sh cpu setting = performance

Input driver = udev Joypad driver = udev Video driver = dispmanx Audio driver = sdl2

Audio Latency = 32 Audio Output Rate = 44100[/B]

Vsync = On - games tear and stutter way too bad for me with this disabled Frame Delay = Depends on game - I set it as high as I can before audio starts to crackle HW Bilinear Filtering = Off

All shaders and overlays disabled

I’m able to get most NES games up to about frame delay 10 but SNES games can vary from 1 to 7.

#197

[QUOTE=Heffer;41871]What settings are you using on your Raspberry Pi to get minimal input lag in addition to the emulator lag fixes?

These are my settings:

Raspberry Pi 3 [B]arm_freq=1200 core_freq=500 sdram_freq=500 gpu_freq=400

runcommand.sh cpu setting = performance

Input driver = udev Joypad driver = udev Video driver = dispmanx Audio driver = sdl2

Audio Latency = 32 Audio Output Rate = 44100[/B]

Vsync = On - games tear and stutter way too bad for me with this disabled Frame Delay = Depends on game - I set it as high as I can before audio starts to crackle HW Bilinear Filtering = Off

All shaders and overlays disabled

I’m able to get most NES games up to about frame delay 10 but SNES games can vary from 1 to 7.[/QUOTE] Only things I’ve changed on RetroPie are:

  • Use dispmanx video driver for 1 frame less input lag.
  • Set NES frame delay to 6 (could perhaps extend a little further). I don’t use frame delay on SNES, since even a setting of 2 caused audio issues in Yoshi’s Island.
  • video_threaded = ‘false’. Probably no effect on input lag.
  • video_smooth = ‘false’. Shouldn’t affect input lag.

The only settings I know for sure affect input lag on the Raspberry Pi are the video driver and the frame delay setting.

#198

[QUOTE=Brunnis;41875]Only things I’ve changed on RetroPie are:

  • Use dispmanx video driver for 1 frame less input lag.
  • Set NES frame delay to 6 (could perhaps extend a little further). I don’t use frame delay on SNES, since even a setting of 2 caused audio issues in Yoshi’s Island.
  • video_threaded = ‘false’. Probably no effect on input lag.
  • video_smooth = ‘false’. Shouldn’t affect input lag.

The only settings I know for sure affect input lag on the Raspberry Pi are the video driver and the frame delay setting.[/QUOTE]

I haven’t done any testing but it “feels” as though there is some input lag tied to the audio latency. With audio set to 32 instead of 48 or 64 it seems more responsive since the audio and video are synced.

I can’t figure out how to do the pause test method on the RPi as I have to use the hotkey enable button to increment the frames and it won’t allow me to input any button presses while the hotkey button is held.

#199

Audio latency does matter but it’s a perceptive issue rather than a visual/response issue in this case. If you see and hear 2 things that are supposed to happen at the same-ish time (within an approx. 80 ms window), your brain says “these two things happened at the same time,” matched to the slowest response. So, if you’re feeling like it’s more latent with higher audio latency, you should be able to mute it and feel the latency melt away, as if by magic.

So, you’ll want to get your audio latency down as low as possible, as well, to get the best feel. The JACK audio driver should allow for very low audio latency in Linux-based systems.

#200

About overclocking… As the RPi 3 tends to heat a lot, it might have the opposite result after some minutes / hours as it’ll slow down if overheating. Hmm, although only 1 core is used and although the frame delay means even this one core is not used at 100%.

I couldn’t live without the shaders, though (crt-pi !). Maybe I could get used to a scaler with no bilinear and with good scanlines.

Thanks for sharing all this :)I used to be frustrated for months / years ago because so many people said they noticed no lag.

#201

[QUOTE=hunterk;41884]Audio latency does matter but it’s a perceptive issue rather than a visual/response issue in this case. If you see and hear 2 things that are supposed to happen at the same-ish time (within an approx. 80 ms window), your brain says “these two things happened at the same time,” matched to the slowest response. So, if you’re feeling like it’s more latent with higher audio latency, you should be able to mute it and feel the latency melt away, as if by magic.

So, you’ll want to get your audio latency down as low as possible, as well, to get the best feel. The JACK audio driver should allow for very low audio latency in Linux-based systems.[/QUOTE]

Anything special needed to get the JACK driver to work with RetroArch on an RPi 3? I’ve set the driver to JACK and set the audio_device to hw:0,0 for the analog jack which is what I’m using and it just seems to crash when launching an emulator. I’m able to successfully start jackd manually from the shell.

EDIT: Never mind I got it working. I had to use: audio_device = “system:playback_1,system:playback_2” instead of hw:0,0

#202

Can you set the audio latency significantly lower with jack enabled (as it can already be lowered with Alsa) Is the tradeoff in terms of cpu time worth it ?

Edit : here, with ALSA + a QAudio DAC+ sound addon, lowering the audio delay makes it necessary the reduce to video_frame_delay setting. So the right tradeoff between input and sound delays has to be figured out. No overclocking here. Methinks input latency prevails.

#203

[QUOTE=bidinou;41887]About overclocking… As the RPi 3 tends to heat a lot, it might have the opposite result after some minutes / hours as it’ll slow down if overheating. Hmm, although only 1 core is used and although the frame delay means even this one core is not used at 100%.

I couldn’t live without the shaders, though (crt-pi !). Maybe I could get used to a scaler with no bilinear and with good scanlines.

Thanks for sharing all this :)I used to be frustrated for months / years ago because so many people said they noticed no lag.[/QUOTE]

I agree, CRT-pi is great on the PI3. Try editing the crt-pi.glslp file and change filter_linear0 = “true” to filter_linear0 = “false”.

This sets nearest neighbor and really sharpens the image nicely.

#204

You can already set #define sharper, is that similar ? (I know, I can figure it out by myself :D)

What is great is that the shader developer got the most out of the Pi while maintaining 60 fps.

#205

I’m back from several days away. I tested the new bsnes code and I see no problem in games with overscan.

Those I found, they are few:

-The Blues Brothers -Dragon Quest I & II -Dragon Quest V

(I checked the 1st and last scanlines for any problem, took some pics: no difference with standard bsnes.)

#206

[QUOTE=Tatsuya79;41937]I’m back from several days away. I tested the new bsnes code and I see no problem in games with overscan.

Those I found, they are few:

-The Blues Brothers -Dragon Quest I & II -Dragon Quest V

(I checked the 1st and last scanlines for any problem, took some pics: no difference with standard bsnes.)[/QUOTE] Great, thanks! I’ll reference your post in the pull requests for both bsnes and bsnes-mercury. Still waiting to hear back from Alcaro after having implemented his suggestions.

#207

[QUOTE=bidinou;41913]Can you set the audio latency significantly lower with jack enabled (as it can already be lowered with Alsa) Is the tradeoff in terms of cpu time worth it ?

Edit : here, with ALSA + a QAudio DAC+ sound addon, lowering the audio delay makes it necessary the reduce to video_frame_delay setting. So the right tradeoff between input and sound delays has to be figured out. No overclocking here. Methinks input latency prevails.[/QUOTE]

JACK seems to bog the emulator down too much even at the default 64ms audio latency. I’ll stick with ALSA for now. How low can you get the latency with the DAC? I’m currently running ALSA at 32ms.