Gamestop controller d-pad left-right only works

Is anyone else using Gamestop’s wireless gamepad? It’s only $9 and it’s pretty good, but only the left-right movement works on the d-pad. Not up and down, although all directionals work perfect on the analog stick. Is there a way to correct this so I can use the d-pad as well?

Other than that minor issue, the pad works well. It’s inexpensive (probably cheaply made), and it gets the job done.

I can add it to the gamepad autodetection list if you do the following -

http://forum.themaister.net/viewtopic.php?id=248

Go to that thread - read post #1 - follow the steps.

Great…I appreciate your help. I have the information you requested below. I am including a link to an image of the controller, if that is helpful.

http://www.nysemagazine.com/statics/Q212_IN_BluetoothController_TS.jpg

Message on screen when game starts is:

HID 30: BROADCOM BLUETOOTH

Button codes:

ENTER (START) = pad 0 : 66, ac=0, src=257 ESCAPE = pad 0 : 111, ac=0, src=257

D-PAD UP = pad 0 : 51, ac = 0, src = 257 D-PAD DOWN = pad 0 : 47, ac = 0, src = 257 D-PAD LEFT = pad 0 : 29, ac = 0, src = 257 D-PAD RIGHT = pad 0 : 32, ac = 0, src = 257

LEFT ANALOG STICK UP = pad 0 : 19, ac = 0, src = 257 LEFT ANALOG STICK DOWN = pad 0 : 20, ac = 0, src = 257 LEFT ANALOG STICK LEFT = pad 0 : 21, ac = 0, src = 257 LEFT ANALOG STICK RIGHT = pad 0 : 22, ac = 0, src = 257 LEFT ANALOG BUTTON (depress analog stick) = pad 0 : 16, ac = 0, src = 25

RIGHT ANALOG STICK UP = pad 0 : 37, ac = 0, src = 257 RIGHT ANALOG STICK DOWN = pad 0 : 39, ac = 0, src = 257 RIGHT ANALOG STICK LEFT = pad 0 : 38, ac = 0, src = 257 RIGHT ANALOG STICK RIGHT = pad 0 : 40, ac = 0, src = 257 RIGHT ANALOG BUTTON (depress analog stick) = pad 0 : 7, ac = 0, src = 25

BUTTON 1 = pad 0 : 8, ac = 0, src = 257 BUTTON 2 = pad 0 : 9, ac = 0, src = 257 BUTTON 3 = pad 0 : 10, ac = 0, src = 257 BUTTON 4 = pad 0 : 11, ac = 0, src = 257

BUTTON L1 = pad 0 : 12, ac = 0, src = 257 BUTTON L2 = pad 0 : 13, ac = 0, src = 257 BUTTON R1 = pad 0 : 14, ac = 0, src = 257 BUTTON R2 = pad 0 : 15, ac = 0, src = 257

Please let me know if you require any additional information.

Thank you.