Lakka Not Recognising PS3 Encoder

RetroArch General
#1

Hi I have recently built a cocktail arcade cabinet and have imaged Lakka onto a USB and I am running it live on a old Windows Vista PC. I brought a kit of buttons and joysticks with a PS3 Encoder. I Wired up the buttons and joysticks and plugged in the encoded to the PC running Lakka. Lakka is not recognising the buttons or joysticks (I have pressed the mapped PS Button). I have tried changing the input modes for both users 1 and 2 as well as the drivers for them.

Windows Vista is recognising the buttons and joysticks (i Can see each button being pressed in the control panel) Does anyone know whats happening or know what i should do?

Thanks very much for your help in advanced.

Heres the kit i brought.

http://www.aliexpress.com/item/Arcade-mame-DIY-KIT-FOR-2-players-PC-PS-3-2-IN-1-to-arcade-joystck/32595240925.html?spm=2114.01010208.3.1.qdWbaW&ws_ab_test=searchweb201556_10,searchweb201602_2_10057_10056_10055_10037_10049_301_10059_10058_10032_10017_405_404_10060_10061_10062_412,searchweb201603_2&btsid=7974ec8d-f8b7-4f11-815d-0cb0f24be314

#2

So, it doesn’t recognize any of your buttons if you go to settings > input > player 1 binds > bind all?

#3

No, Nothing only the actual keyboard that came with the computer and my PS4 controller (I don’t have them connected when using the encoder).e

#4

You can try going to settings > drivers and change your input driver from udev to linuxraw to see if that helps.

#5

I Have tried all the drivers twice already and nothing changed when i did.

#6

Ok, I have tested changing the drivers again(and rebooting) and the buttons/joysticks don’t work.