ParaLLel N64 ignores upscale settings

Cutter · 11 February 2024 15:07

I’m using ParaLLel N64 on Lakka with an rpi5 with the default core options, except Resolution and Upscale factor. The game is rendered at 1x scale, ignoring the setting.

Enabling Notification > Statistics does not have any effect with this core (no info is shown on the left side).

I tried gl and glcore drivers.

Core options:

parallel-n64-64dd-hardware = "disabled"
parallel-n64-alt-map = "disabled"
parallel-n64-angrylion-multithread = "all threads"
parallel-n64-angrylion-overscan = "disabled"
parallel-n64-angrylion-sync = "Low"
parallel-n64-angrylion-vioverlay = "Filtered"
parallel-n64-aspectratiohint = "normal"
parallel-n64-astick-deadzone = "15"
parallel-n64-astick-sensitivity = "100"
parallel-n64-audio-buffer-size = "2048"
parallel-n64-boot-device = "Default"
parallel-n64-bufferswap = "disabled"
parallel-n64-cpucore = "dynamic_recompiler"
parallel-n64-disable_expmem = "enabled"
parallel-n64-dithering = "enabled"
parallel-n64-filtering = "automatic"
parallel-n64-framerate = "original"
parallel-n64-gfxplugin = "auto"
parallel-n64-gfxplugin-accuracy = "veryhigh"
parallel-n64-pak1 = "none"
parallel-n64-pak2 = "none"
parallel-n64-pak3 = "none"
parallel-n64-pak4 = "none"
parallel-n64-parallel-rdp-dither-filter = "enabled"
parallel-n64-parallel-rdp-divot-filter = "enabled"
parallel-n64-parallel-rdp-downscaling = "disable"
parallel-n64-parallel-rdp-gamma-dither = "enabled"
parallel-n64-parallel-rdp-native-tex-rect = "enabled"
parallel-n64-parallel-rdp-native-texture-lod = "disabled"
parallel-n64-parallel-rdp-overscan = "0"
parallel-n64-parallel-rdp-synchronous = "enabled"
parallel-n64-parallel-rdp-upscaling = "4x"
parallel-n64-parallel-rdp-vi-aa = "enabled"
parallel-n64-parallel-rdp-vi-bilinear = "enabled"
parallel-n64-polyoffset-factor = "-3.0"
parallel-n64-polyoffset-units = "-3.0"
parallel-n64-rspplugin = "auto"
parallel-n64-screensize = "1440x1080"
parallel-n64-send_allist_to_hle_rsp = "disabled"
parallel-n64-vcache-vbo = "disabled"
parallel-n64-virefresh = "auto"

This is the log:

################################################################################
# ... output of retroarch -v
# Lakka release: RPi5.aarch64-devel-20240209174937-cdddbc6
# 
################################################################################
[INFO] [Config]: Looking for config in: "/storage/.config/retroarch/retroarch.cfg".
[INFO] RetroArch 1.17.0 (Git ad8975c)
[INFO] === Build =======================================
[INFO] Capabilities: ASIMD 
[INFO] Version: 1.17.0
[INFO] Git: ad8975c
[INFO] Built: Feb  9 2024
[INFO] =================================================
[INFO] [Input]: Found input driver: "udev".
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] [Core]: Version of libretro API: 1, Compiled against API: 1
[INFO] [Core]: Geometry: 320x240, Aspect: 1.333, FPS: 60.00, Sample rate: 48000.00 Hz.
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Set video size to: fullscreen.
[INFO] [Video]: Starting threaded video driver..
[INFO] [DRM]: Found 2 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 10 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1200) 1920 x 1200, 59.950172 Hz
[INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 60.000000 Hz
[INFO] [DRM]: Mode 2: (1600x1200) 1600 x 1200, 60.000000 Hz
[INFO] [DRM]: Mode 3: (1680x1050) 1680 x 1050, 59.883251 Hz
[INFO] [DRM]: Mode 4: (1280x1024) 1280 x 1024, 60.019741 Hz
[INFO] [DRM]: Mode 5: (1440x900) 1440 x 900, 59.901459 Hz
[INFO] [DRM]: Mode 6: (1280x960) 1280 x 960, 60.000000 Hz
[INFO] [DRM]: Mode 7: (1024x768) 1024 x 768, 60.003841 Hz
[INFO] [DRM]: Mode 8: (800x600) 800 x 600, 60.316540 Hz
[INFO] [DRM]: Mode 9: (640x480) 640 x 480, 59.940475 Hz
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: "kms".
[INFO] [GL]: Detecting screen resolution: 1920x1200.
[INFO] [EGL] Found EGL client version >= 1.5, trying eglGetPlatformDisplay
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7fb00034b0.
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [GL]: Vendor: Broadcom, Renderer: V3D 7.1.
[INFO] [GL]: Version: OpenGL ES 3.1 Mesa 23.3.5.
[INFO] [GL]: Using resolution 1920x1200.
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ...
[INFO] [GLSL]: Compiling ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling simple ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling modern snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling bokeh shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snowflake shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[WARN] [udev]: Full-screen pointer won't be available.
[INFO] [udev]: Keyboard #0: "pwr_button" (/dev/input/event1).
[INFO] [udev]: Keyboard #1: "cec-mini-kb" (/dev/input/event0).
[INFO] [udev]: Mouse/Touch #0: "Wireless Controller Touchpad" (ABS) /dev/input/event2.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports 16 force feedback effects.
[INFO] [Autoconf]: Wireless Controller configured in port 1.
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: "kms".
[WARN] [udev]: Mouse grab/ungrab feature unavailable.
[INFO] [ALSA] Using ALSA version 1.2.8
[ERROR] [ALSA]: Failed to open PLAYBACK stream on device "default": Unknown error 524
[ERROR] [ALSA]: Failed to initialize...
[INFO] [Audio]: Started synchronous audio driver.
[ERROR] Failed to initialize audio driver. Will continue without audio.
[INFO] [ALSA] Using ALSA version 1.2.8
[INFO] [Microphone]: Initialized microphone driver.
wifi is already enabled
[INFO] [Display]: Found display driver: "gl".
ALSA lib /mnt/data/lakkabuildbot/nightly/Lakka-devel/build.Lakka-RPi5.aarch64-5.0-devel/build/alsa-lib-1.2.8/src/seq/seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
[ERROR] [MIDI]: snd_seq_open failed with error -2.
[ERROR] [MIDI]: Initialization failed.
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_music_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_video_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_image_history.lpl".
[INFO] [Playlist]: Loading favorites file: "/storage/.config/retroarch/content_favorites.lpl".
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [Environ]: SET_SUBSYSTEM_INFO.
[INFO] [Core]: Using content: "/storage/roms/Nintedo 64/Super Mario 64 (Europe) (En,Fr,De).z64".
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading core..
[INFO] [Core]: Unloading core symbols..
[INFO] Threaded video stats: Frames pushed: 368, Frames dropped: 0.
[INFO] RetroArch 1.17.0 (Git ad8975c)
[INFO] === Build =======================================
[INFO] Capabilities: ASIMD 
[INFO] Version: 1.17.0
[INFO] Git: ad8975c
[INFO] Built: Feb  9 2024
[INFO] =================================================
[INFO] [Input]: Found input driver: "udev".
[INFO] [Core]: Loading dynamic libretro core from: "/tmp/cores/parallel_n64_libretro.so"
[INFO] [Overrides]: Redirecting save file to "/storage/savefiles/ParaLLEl N64/Super Mario 64 (Europe) (En,Fr,De).srm".
[INFO] [Overrides]: Redirecting save state to "/storage/savestates/ParaLLEl N64/Super Mario 64 (Europe) (En,Fr,De).state".
[INFO] [Environ]: SET_VARIABLES.
[INFO] [Environ]: SET_CONTROLLER_INFO.
[INFO] [Environ]: GET_LOG_INTERFACE.
[INFO] [Environ]: GET_PERF_INTERFACE.
[INFO] [Environ]: SET_PIXEL_FORMAT: XRGB8888.
[INFO] [Environ]: GET_RUMBLE_INTERFACE.
[INFO] [Environ]: SET_SERIALIZATION_QUIRKS.
[INFO] [Content]: Loading content file: "/storage/roms/Nintedo 64/Super Mario 64 (Europe) (En,Fr,De).z64".
[libretro WARN] mupen64plus: No version number in 'Core' config section. Setting defaults.
[libretro INFO] EmuThread: M64CMD_ROM_OPEN
[libretro INFO] mupen64plus: SUPER MARIO 64 INI patches applied.
[libretro INFO] mupen64plus: Goodname: SUPER MARIO 64
[libretro INFO] mupen64plus: Headername: SUPER MARIO 64
[libretro INFO] mupen64plus: Name: SUPER MARIO 64      
[libretro INFO] mupen64plus: MD5: 45676429EF6B90E65B517129B700308E
[libretro INFO] mupen64plus: CRC: a03cf036 bcc1c5d2
[libretro INFO] mupen64plus: Imagetype: .z64 (native)
[libretro INFO] mupen64plus: Rom size: 8388608 bytes (or 8 Mb or 64 Megabits)
[libretro INFO] mupen64plus: Version: 1446
[libretro INFO] mupen64plus: Manufacturer: Nintendo
[libretro INFO] mupen64plus: Country: Europe (P)
[libretro INFO] EmuThread: M64CMD_ROM_GET_HEADER
[INFO] [Replay]: Found last replay slot: #0
[INFO] [Core]: Version of libretro API: 1, Compiled against API: 1
[INFO] [Core]: Geometry: 1440x1080, Aspect: 1.333, FPS: 50.00, Sample rate: 44100.00 Hz.
[INFO] [Audio]: Set audio input rate to: 44100.00 Hz.
[INFO] [Video]: Timings deviate too much. Will not adjust. (Target = 60.00 Hz, Game = 50.00 Hz)
[INFO] [Video]: Set video size to: fullscreen.
[INFO] [Video]: Starting threaded video driver..
[INFO] [DRM]: Found 2 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 10 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1200) 1920 x 1200, 59.950172 Hz
[INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 60.000000 Hz
[INFO] [DRM]: Mode 2: (1600x1200) 1600 x 1200, 60.000000 Hz
[INFO] [DRM]: Mode 3: (1680x1050) 1680 x 1050, 59.883251 Hz
[INFO] [DRM]: Mode 4: (1280x1024) 1280 x 1024, 60.019741 Hz
[INFO] [DRM]: Mode 5: (1440x900) 1440 x 900, 59.901459 Hz
[INFO] [DRM]: Mode 6: (1280x960) 1280 x 960, 60.000000 Hz
[INFO] [DRM]: Mode 7: (1024x768) 1024 x 768, 60.003841 Hz
[INFO] [DRM]: Mode 8: (800x600) 800 x 600, 60.316540 Hz
[INFO] [DRM]: Mode 9: (640x480) 640 x 480, 59.940475 Hz
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: "kms".
[INFO] [GL]: Detecting screen resolution: 1920x1200.
[INFO] [EGL] Found EGL client version >= 1.5, trying eglGetPlatformDisplay
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7fa0018630.
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [GL]: Vendor: Broadcom, Renderer: V3D 7.1.
[INFO] [GL]: Version: OpenGL ES 3.1 Mesa 23.3.5.
[INFO] [GL]: Using resolution 1920x1200.
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ...
[INFO] [GLSL]: Compiling ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling simple ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling modern snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling bokeh shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snowflake shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[WARN] [udev]: Full-screen pointer won't be available.
[INFO] [udev]: Keyboard #0: "pwr_button" (/dev/input/event1).
[INFO] [udev]: Mouse/Touch #0: "Wireless Controller Touchpad" (ABS) /dev/input/event2.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports 16 force feedback effects.
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: "kms".
[WARN] [udev]: Mouse grab/ungrab feature unavailable.
[INFO] [ALSA] Using ALSA version 1.2.8
[ERROR] [ALSA]: Failed to open PLAYBACK stream on device "default": Unknown error 524
[ERROR] [ALSA]: Failed to initialize...
[INFO] [Audio]: Started synchronous audio driver.
[ERROR] Failed to initialize audio driver. Will continue without audio.
[INFO] [ALSA] Using ALSA version 1.2.8
[INFO] [Microphone]: Initialized microphone driver.
wifi is already enabled
[INFO] [Display]: Found display driver: "gl".
[INFO] [Environ]: SET_SUBSYSTEM_INFO.
ALSA lib /mnt/data/lakkabuildbot/nightly/Lakka-devel/build.Lakka-RPi5.aarch64-5.0-devel/build/alsa-lib-1.2.8/src/seq/seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
[ERROR] [MIDI]: snd_seq_open failed with error -2.
[ERROR] [MIDI]: Initialization failed.
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_music_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_video_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_image_history.lpl".
[INFO] [Playlist]: Loading favorites file: "/storage/.config/retroarch/content_favorites.lpl".
[INFO] [Environ]: SET_INPUT_DESCRIPTORS:
[libretro INFO] EmuThread: M64CMD_EXECUTE.
[libretro INFO] mupen64plus: Starting R4300 emulator: Dynamic Recompiler
[libretro INFO] mupen64plus: Init new dynarec
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 20 seconds.
[INFO] [Runtime]: Saving runtime log file: "/storage/playlists/logs/ParaLLEl N64/Super Mario 64 (Europe) (En,Fr,De).lrtl".
[INFO] [Core]: No content, starting dummy core.
[INFO] [SRAM]: Saving RAM type #0 to "/storage/savefiles/ParaLLEl N64/Super Mario 64 (Europe) (En,Fr,De).srm".
[INFO] [SRAM]: Saved successfully to "/storage/savefiles/ParaLLEl N64/Super Mario 64 (Europe) (En,Fr,De).srm".
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading game..
[libretro INFO] mupen64plus: R4300 emulator finished.
[libretro INFO] EmuThread: co_switch main_thread.
[INFO] [Core]: Unloading core..
[INFO] [PERF]: Performance counters (libretro):
[INFO] [Core]: Unloading core symbols..
[INFO] [Core]: Saved core options file to "/storage/.config/retroarch/config/ParaLLEl N64/ParaLLEl N64.opt".
[INFO] Threaded video stats: Frames pushed: 754, Frames dropped: 5.
[INFO] RetroArch 1.17.0 (Git ad8975c)
[INFO] === Build =======================================
[INFO] Capabilities: ASIMD 
[INFO] Version: 1.17.0
[INFO] Git: ad8975c
[INFO] Built: Feb  9 2024
[INFO] =================================================
[INFO] [Input]: Found input driver: "udev".
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] [Core]: Version of libretro API: 1, Compiled against API: 1
[INFO] [Core]: Geometry: 320x240, Aspect: 1.333, FPS: 60.00, Sample rate: 48000.00 Hz.
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Set video size to: fullscreen.
[INFO] [Video]: Starting threaded video driver..
[INFO] [DRM]: Found 2 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 10 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1200) 1920 x 1200, 59.950172 Hz
[INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 60.000000 Hz
[INFO] [DRM]: Mode 2: (1600x1200) 1600 x 1200, 60.000000 Hz
[INFO] [DRM]: Mode 3: (1680x1050) 1680 x 1050, 59.883251 Hz
[INFO] [DRM]: Mode 4: (1280x1024) 1280 x 1024, 60.019741 Hz
[INFO] [DRM]: Mode 5: (1440x900) 1440 x 900, 59.901459 Hz
[INFO] [DRM]: Mode 6: (1280x960) 1280 x 960, 60.000000 Hz
[INFO] [DRM]: Mode 7: (1024x768) 1024 x 768, 60.003841 Hz
[INFO] [DRM]: Mode 8: (800x600) 800 x 600, 60.316540 Hz
[INFO] [DRM]: Mode 9: (640x480) 640 x 480, 59.940475 Hz
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: "kms".
[INFO] [GL]: Detecting screen resolution: 1920x1200.
[INFO] [EGL] Found EGL client version >= 1.5, trying eglGetPlatformDisplay
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7fa000a320.
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [GL]: Vendor: Broadcom, Renderer: V3D 7.1.
[INFO] [GL]: Version: OpenGL ES 3.1 Mesa 23.3.5.
[INFO] [GL]: Using resolution 1920x1200.
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ...
[INFO] [GLSL]: Compiling ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling simple ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling modern snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling bokeh shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snowflake shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[WARN] [udev]: Full-screen pointer won't be available.
[INFO] [udev]: Keyboard #0: "pwr_button" (/dev/input/event1).
[INFO] [udev]: Mouse/Touch #0: "Wireless Controller Touchpad" (ABS) /dev/input/event2.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports 16 force feedback effects.
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: "kms".
[WARN] [udev]: Mouse grab/ungrab feature unavailable.
[INFO] [ALSA] Using ALSA version 1.2.8
[ERROR] [ALSA]: Failed to open PLAYBACK stream on device "default": Unknown error 524
[ERROR] [ALSA]: Failed to initialize...
[INFO] [Audio]: Started synchronous audio driver.
[ERROR] Failed to initialize audio driver. Will continue without audio.
[INFO] [ALSA] Using ALSA version 1.2.8
[INFO] [Microphone]: Initialized microphone driver.
wifi is already enabled
[INFO] [Display]: Found display driver: "gl".
[INFO] [Environ]: SET_SUBSYSTEM_INFO.
ALSA lib /mnt/data/lakkabuildbot/nightly/Lakka-devel/build.Lakka-RPi5.aarch64-5.0-devel/build/alsa-lib-1.2.8/src/seq/seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
[ERROR] [MIDI]: snd_seq_open failed with error -2.
[ERROR] [MIDI]: Initialization failed.
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_music_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_video_history.lpl".
[INFO] [Playlist]: Loading history file: "/storage/.config/retroarch/content_image_history.lpl".
[INFO] [Playlist]: Loading favorites file: "/storage/.config/retroarch/content_favorites.lpl".
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [Config]: Saved new config to "/storage/.config/retroarch/retroarch.cfg".
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading core..
[INFO] [Core]: Unloading core symbols..
[INFO] Threaded video stats: Frames pushed: 196, Frames dropped: 0.
plugin_start_gfx success.
Gfx RomOpen.

Cutter · 11 February 2024 15:08

Setting “GFX core” to “ParaLLel” instead of “auto” gives a segmentation fault:

################################################################################
# ... output of retroarch -v
# Lakka release: RPi5.aarch64-devel-20240209174937-cdddbc6
# 
################################################################################
[INFO] [Config]: Looking for config in: "/storage/.config/retroarch/retroarch.cfg".
[INFO] RetroArch 1.17.0 (Git ad8975c)
[INFO] === Build =======================================
[INFO] Capacités: ASIMD 
[INFO] Version: 1.17.0
[INFO] Git: ad8975c
[INFO] Built: Feb  9 2024
[INFO] =================================================
[INFO] [Input]: Found input driver: "udev".
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] [Core]: Version de l'API libretro: 1, Compilé avec l'API: 1
[INFO] [Core]: Geometry: 320x240, Aspect: 1.333, FPS: 60.00, Sample rate: 48000.00 Hz.
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Set video size to: fullscreen.
[INFO] [Video]: Starting threaded video driver..
[INFO] [DRM]: Found 2 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 10 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1200) 1920 x 1200, 59.950172 Hz
[INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 60.000000 Hz
[INFO] [DRM]: Mode 2: (1600x1200) 1600 x 1200, 60.000000 Hz
[INFO] [DRM]: Mode 3: (1680x1050) 1680 x 1050, 59.883251 Hz
[INFO] [DRM]: Mode 4: (1280x1024) 1280 x 1024, 60.019741 Hz
[INFO] [DRM]: Mode 5: (1440x900) 1440 x 900, 59.901459 Hz
[INFO] [DRM]: Mode 6: (1280x960) 1280 x 960, 60.000000 Hz
[INFO] [DRM]: Mode 7: (1024x768) 1024 x 768, 60.003841 Hz
[INFO] [DRM]: Mode 8: (800x600) 800 x 600, 60.316540 Hz
[INFO] [DRM]: Mode 9: (640x480) 640 x 480, 59.940475 Hz
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: "kms".
[INFO] [GL]: Detecting screen resolution: 1920x1200.
[INFO] [EGL] Found EGL client version >= 1.5, trying eglGetPlatformDisplay
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7fb00034b0.
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [GL]: Vendor: Broadcom, Renderer: V3D 7.1.
[INFO] [GL]: Version: OpenGL ES 3.1 Mesa 23.3.5.
[INFO] [GL]: Using resolution 1920x1200.
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ...
[INFO] [GLSL]: Compiling ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling simple ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling modern snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling bokeh shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snowflake shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[WARN] [udev]: Full-screen pointer won't be available.
[INFO] [udev]: Keyboard #0: "pwr_button" (/dev/input/event1).
[INFO] [udev]: Mouse/Touch #0: "Wireless Controller Touchpad" (ABS) /dev/input/event2.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports 16 force feedback effects.
[INFO] [Autoconf]: Wireless Controller configuré dans le port 1.
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: "kms".
[WARN] [udev]: Mouse grab/ungrab feature unavailable.
[INFO] [ALSA] Using ALSA version 1.2.8
[ERROR] [ALSA]: Failed to open PLAYBACK stream on device "default": Unknown error 524
[ERROR] [ALSA]: Failed to initialize...
[INFO] [Audio]: Started synchronous audio driver.
[ERROR] Failed to initialize audio driver. Will continue without audio.
[INFO] [ALSA] Using ALSA version 1.2.8
[INFO] [Microphone]: Initialized microphone driver.
wifi is already enabled
[INFO] [Display]: Found display driver: "gl".
ALSA lib /mnt/data/lakkabuildbot/nightly/Lakka-devel/build.Lakka-RPi5.aarch64-5.0-devel/build/alsa-lib-1.2.8/src/seq/seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
[ERROR] [MIDI]: snd_seq_open failed with error -2.
[ERROR] [MIDI]: Initialization failed.
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_history.lpl".
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_music_history.lpl".
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_video_history.lpl".
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_image_history.lpl".
[INFO] [Playlist]: Chargement du fichier des favoris: "/storage/.config/retroarch/content_favorites.lpl".
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [Environ]: SET_SUBSYSTEM_INFO.
[INFO] [Core]: Using content: "/storage/roms/Nintedo 64/Super Mario 64 (Europe) (En,Fr,De).z64".
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading core..
[INFO] [Core]: Unloading core symbols..
[INFO] Threaded video stats: Frames pushed: 252, Frames dropped: 0.
[INFO] RetroArch 1.17.0 (Git ad8975c)
[INFO] === Build =======================================
[INFO] Capacités: ASIMD 
[INFO] Version: 1.17.0
[INFO] Git: ad8975c
[INFO] Built: Feb  9 2024
[INFO] =================================================
[INFO] [Input]: Found input driver: "udev".
[INFO] [Core]: Loading dynamic libretro core from: "/tmp/cores/parallel_n64_libretro.so"
[INFO] [Overrides]: Redirection du fichier de sauvegarde vers "/storage/savefiles/ParaLLEl N64/Super Mario 64 (Europe) (En,Fr,De).srm".
[INFO] [Overrides]: Redirection du fichier de sauvegarde instantanée vers "/storage/savestates/ParaLLEl N64/Super Mario 64 (Europe) (En,Fr,De).state".
[INFO] [Environ]: SET_VARIABLES.
[INFO] [Environ]: SET_CONTROLLER_INFO.
[INFO] [Environ]: GET_LOG_INTERFACE.
[INFO] [Environ]: GET_PERF_INTERFACE.
[INFO] [Environ]: SET_PIXEL_FORMAT: XRGB8888.
[INFO] [Environ]: GET_RUMBLE_INTERFACE.
[INFO] [Environ]: SET_SERIALIZATION_QUIRKS.
[INFO] [Content]: Chargement du fichier de contenu: "/storage/roms/Nintedo 64/Super Mario 64 (Europe) (En,Fr,De).z64".
[INFO] [Environ]: SET_HW_RENDER, context type: N/A.
[ERROR] Requesting Vulkan context, but RetroArch is not compiled against Vulkan. Cannot use HW context.
[ERROR] [Environ]: SET_HW_RENDER - Dynamic request HW context failed.
[libretro ERROR] mupen64plus: libretro frontend doesn't have Vulkan support.
[libretro WARN] mupen64plus: No version number in 'Core' config section. Setting defaults.
[libretro INFO] EmuThread: M64CMD_ROM_OPEN
[libretro INFO] mupen64plus: SUPER MARIO 64 INI patches applied.
[libretro INFO] mupen64plus: Goodname: SUPER MARIO 64
[libretro INFO] mupen64plus: Headername: SUPER MARIO 64
[libretro INFO] mupen64plus: Name: SUPER MARIO 64      
[libretro INFO] mupen64plus: MD5: 45676429EF6B90E65B517129B700308E
[libretro INFO] mupen64plus: CRC: a03cf036 bcc1c5d2
[libretro INFO] mupen64plus: Imagetype: .z64 (native)
[libretro INFO] mupen64plus: Rom size: 8388608 bytes (or 8 Mb or 64 Megabits)
[libretro INFO] mupen64plus: Version: 1446
[libretro INFO] mupen64plus: Manufacturer: Nintendo
[libretro INFO] mupen64plus: Country: Europe (P)
[libretro INFO] EmuThread: M64CMD_ROM_GET_HEADER
[INFO] [Replay]: Dernier emplacement de replay trouvé: #0
[INFO] [Core]: Version de l'API libretro: 1, Compilé avec l'API: 1
[INFO] [Core]: Geometry: 1440x1080, Aspect: 1.333, FPS: 50.00, Sample rate: 44100.00 Hz.
[INFO] [Audio]: Set audio input rate to: 44100.00 Hz.
[INFO] [Video]: Timings deviate too much. Will not adjust. (Target = 60.00 Hz, Game = 50.00 Hz)
[INFO] [Video]: Set video size to: fullscreen.
[INFO] [Video]: Starting threaded video driver..
[INFO] [DRM]: Found 2 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 10 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1200) 1920 x 1200, 59.950172 Hz
[INFO] [DRM]: Mode 1: (1920x1080) 1920 x 1080, 60.000000 Hz
[INFO] [DRM]: Mode 2: (1600x1200) 1600 x 1200, 60.000000 Hz
[INFO] [DRM]: Mode 3: (1680x1050) 1680 x 1050, 59.883251 Hz
[INFO] [DRM]: Mode 4: (1280x1024) 1280 x 1024, 60.019741 Hz
[INFO] [DRM]: Mode 5: (1440x900) 1440 x 900, 59.901459 Hz
[INFO] [DRM]: Mode 6: (1280x960) 1280 x 960, 60.000000 Hz
[INFO] [DRM]: Mode 7: (1024x768) 1024 x 768, 60.003841 Hz
[INFO] [DRM]: Mode 8: (800x600) 800 x 600, 60.316540 Hz
[INFO] [DRM]: Mode 9: (640x480) 640 x 480, 59.940475 Hz
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: "kms".
[INFO] [GL]: Detecting screen resolution: 1920x1200.
[INFO] [EGL] Found EGL client version >= 1.5, trying eglGetPlatformDisplay
libGL: Can't open configuration file /etc/drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7fac0037d0.
[INFO] [KMS]: New FB: 1920x1200 (stride: 7680).
[INFO] [GL]: Vendor: Broadcom, Renderer: V3D 7.1.
[INFO] [GL]: Version: OpenGL ES 3.1 Mesa 23.3.5.
[INFO] [GL]: Using resolution 1920x1200.
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ...
[INFO] [GLSL]: Compiling ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling simple ribbon shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling modern snow shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling bokeh shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Compiling snowflake shader..
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[WARN] [udev]: Full-screen pointer won't be available.
[INFO] [udev]: Keyboard #0: "pwr_button" (/dev/input/event1).
[INFO] [udev]: Keyboard #1: "cec-mini-kb" (/dev/input/event0).
[INFO] [udev]: Mouse/Touch #0: "Wireless Controller Touchpad" (ABS) /dev/input/event2.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports 16 force feedback effects.
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: "kms".
[WARN] [udev]: Mouse grab/ungrab feature unavailable.
[INFO] [ALSA] Using ALSA version 1.2.8
[ERROR] [ALSA]: Failed to open PLAYBACK stream on device "default": Unknown error 524
[ERROR] [ALSA]: Failed to initialize...
[INFO] [Audio]: Started synchronous audio driver.
[ERROR] Failed to initialize audio driver. Will continue without audio.
[INFO] [ALSA] Using ALSA version 1.2.8
[INFO] [Microphone]: Initialized microphone driver.
wifi is already enabled
[INFO] [Display]: Found display driver: "gl".
[INFO] [Environ]: SET_SUBSYSTEM_INFO.
ALSA lib /mnt/data/lakkabuildbot/nightly/Lakka-devel/build.Lakka-RPi5.aarch64-5.0-devel/build/alsa-lib-1.2.8/src/seq/seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
[ERROR] [MIDI]: snd_seq_open failed with error -2.
[ERROR] [MIDI]: Initialization failed.
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_history.lpl".
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_music_history.lpl".
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_video_history.lpl".
[INFO] [Playlist]: Chargement du fichier d'historique: "/storage/.config/retroarch/content_image_history.lpl".
[INFO] [Playlist]: Chargement du fichier des favoris: "/storage/.config/retroarch/content_favorites.lpl".
Segmentation fault

GemaH · 11 February 2024 15:23

In this core, if you set the gfx plugin to “auto” it uses the ancient Glide64 plugin (Not GlideN64).

If you want to use the Parallel RDP gfx plugin, the device needs to support Vulkan. Is that even possible on a Pi? Even if it is, i imagine it will be very slow on it.

You should throw away this ancient Parallel core and use a newer one. But again, i’m not sure if that’s possible on a Pi. What other N64 cores can you use? Is there one that at least has the newer GlideN64 in it?

Cutter · 11 February 2024 15:28

The other N64 core shipped with Lakka, (Mupen64Plus-next) also gives a segmentation fault.

GemaH · 11 February 2024 15:43

Does Mupen64plus-next generate a core option config? If it defaults to Parallel RDP as the gfx plugin your setup must be compatible with Vulkan. I don’t know if that works on a Pi or if you need to manually install such drivers.

If you can, try to default it to GlideN64. Because even if Parallel works it won’t be full speed, especially if you want to upscale, i can barely upscale to 2x with a 1060 gfx card on an i5 4670 and that’s what, 10 times more powerful than a Pi5?

Maybe you can use a N64 emulator outside RetroArch?

Cutter · 11 February 2024 16:36

No, it does not generate a config. I’ve created a config file with just the gfx plugin option set to GlideN64, but it does not seem to read it.

The rpi5 supports Vulkan 1.2 but Lakka doesn’t seem to include the driver (yet ?).

GemaH · 11 February 2024 16:50

Try this core config file:

mupen64plus-169screensize = "960x540"
mupen64plus-43screensize = "640x480"
mupen64plus-alt-map = "False"
mupen64plus-angrylion-multithread = "all threads"
mupen64plus-angrylion-overscan = "disabled"
mupen64plus-angrylion-sync = "Low"
mupen64plus-angrylion-vioverlay = "Filtered"
mupen64plus-aspect = "4:3"
mupen64plus-astick-deadzone = "15"
mupen64plus-astick-sensitivity = "100"
mupen64plus-BackgroundMode = "OnePiece"
mupen64plus-BilinearMode = "standard"
mupen64plus-CorrectTexrectCoords = "Off"
mupen64plus-CountPerOp = "0"
mupen64plus-CountPerOpDenomPot = "0"
mupen64plus-cpucore = "dynamic_recompiler"
mupen64plus-d-cbutton = "C3"
mupen64plus-DitheringPattern = "False"
mupen64plus-DitheringQuantization = "False"
mupen64plus-EnableCopyAuxToRDRAM = "False"
mupen64plus-EnableCopyColorToRDRAM = "Async"
mupen64plus-EnableCopyDepthToRDRAM = "Software"
mupen64plus-EnableEnhancedHighResStorage = "False"
mupen64plus-EnableEnhancedTextureStorage = "False"
mupen64plus-EnableFBEmulation = "True"
mupen64plus-EnableFragmentDepthWrite = "True"
mupen64plus-EnableHiResAltCRC = "False"
mupen64plus-EnableHWLighting = "False"
mupen64plus-EnableInaccurateTextureCoordinates = "False"
mupen64plus-EnableLegacyBlending = "False"
mupen64plus-EnableLODEmulation = "True"
mupen64plus-EnableN64DepthCompare = "False"
mupen64plus-EnableNativeResFactor = "0"
mupen64plus-EnableNativeResTexrects = "Disabled"
mupen64plus-EnableOverscan = "Enabled"
mupen64plus-EnableShadersStorage = "True"
mupen64plus-EnableTexCoordBounds = "False"
mupen64plus-EnableTextureCache = "True"
mupen64plus-ForceDisableExtraMem = "False"
mupen64plus-FrameDuping = "False"
mupen64plus-Framerate = "Original"
mupen64plus-FXAA = "0"
mupen64plus-GLideN64IniBehaviour = "late"
mupen64plus-HybridFilter = "True"
mupen64plus-IgnoreTLBExceptions = "False"
mupen64plus-l-cbutton = "C2"
mupen64plus-MaxHiResTxVramLimit = "0"
mupen64plus-MaxTxCacheSize = "8000"
mupen64plus-MultiSampling = "0"
mupen64plus-OverscanBottom = "0"
mupen64plus-OverscanLeft = "0"
mupen64plus-OverscanRight = "0"
mupen64plus-OverscanTop = "0"
mupen64plus-pak1 = "memory"
mupen64plus-pak2 = "none"
mupen64plus-pak3 = "none"
mupen64plus-pak4 = "none"
mupen64plus-parallel-rdp-deinterlace-method = "Bob"
mupen64plus-parallel-rdp-dither-filter = "True"
mupen64plus-parallel-rdp-divot-filter = "True"
mupen64plus-parallel-rdp-downscaling = "disable"
mupen64plus-parallel-rdp-gamma-dither = "True"
mupen64plus-parallel-rdp-native-tex-rect = "True"
mupen64plus-parallel-rdp-native-texture-lod = "False"
mupen64plus-parallel-rdp-overscan = "0"
mupen64plus-parallel-rdp-super-sampled-read-back = "False"
mupen64plus-parallel-rdp-super-sampled-read-back-dither = "True"
mupen64plus-parallel-rdp-synchronous = "True"
mupen64plus-parallel-rdp-upscaling = "1x"
mupen64plus-parallel-rdp-vi-aa = "True"
mupen64plus-parallel-rdp-vi-bilinear = "True"
mupen64plus-r-cbutton = "C1"
mupen64plus-rdp-plugin = "gliden64"
mupen64plus-RDRAMImageDitheringMode = "False"
mupen64plus-rsp-plugin = "hle"
mupen64plus-ThreadedRenderer = "False"
mupen64plus-txCacheCompression = "True"
mupen64plus-txEnhancementMode = "None"
mupen64plus-txFilterIgnoreBG = "True"
mupen64plus-txFilterMode = "None"
mupen64plus-txHiresEnable = "False"
mupen64plus-txHiresFullAlphaChannel = "False"
mupen64plus-u-cbutton = "C4"
mupen64plus-virefresh = "Auto"

These are the default values, at least on the Windows version, with GlideN64 chosen as gfx.

Name of the file should be “Mupen64Plus-Next.opt” though i don’t know if the Pi changes the extensions.

Cutter · 11 February 2024 18:23

Thanks, I’ll try. I’ve just seen someone mention on Discord that the Mupen64Plus-Next core was broken by a force push, so maybe that explains it.

Cutter · 11 February 2024 19:25

It also crashes with the config file you provided.

(We can move this discussion to the thread I’ve created).