Running Sega 32X ROMs on Windows

EN: I am creating this theme so that the creators of RetroArch will pay attention to it in future updates.

When will Sega 32X ROMs finally run normally on a Windows system? The search for a solution to this problem did not lead to anything, as well as tips from users. I’m not saying that PicoDrive is a bad kernel, but Sega 32X ROMs normally work only on Android, but not on Windows, since this emulator was developed for smartphones and tablets. I know that the core of Kega Fusion will not be able to create in any way, as the topic about it was discussed.

Is it even possible to launch games for the Sega 32X, or do gamers just have to accept it?

RU: Я создаю эту тему, чтобы создатели RetroArch обратили на это внимание в будущих обновлениях.

Когда наконец будет нормальный запуск РОМов Sega 32X на системе Windows? Поиски решения этой проблемы ни к чему не привели, а также советы от пользователей. Не говорю, что PicoDrive плохое ядро, но нормально РОМы Sega 32X работают только на системе Android, но не на Windows, так как под смартфоны и планшеты этот эмулятор и был разработан. Знаю, что ядро Kega Fusion не получится создать никак, так как тема насчёт него обсуждалась.

Есть ли вообще возможность запустить игры для Sega 32X или просто геймерам надо смириться?

Picodrive works fine on Windows, AFAIK, including for 32X games.

EN: I checked the emulator several times with each new version - all the same: Failed to load content. And this is really strange, since on Android ROMs I run without problems, but not on Windows. Moreover, as I said above, PicoDrive was sharpened ONLY for Android.

RU: Я проверял эмулятор несколько раз с каждой новой версией - всё одно и то же: Не удалось загрузить контент. И это реально странно, так как на Android РОМы у меня запускаются без проблем, но не на Windows. Тем более, как я говорил выше, PicoDrive был заточен ТОЛЬКО под Android.

Here, by the way, I found the GitHub emulator. It is written in the README that:

"This is yet another Megadrive / Genesis / Sega CD / Mega CD / 32X / SMS emulator, which was written having ARM-based handheld devices in mind (such as smartphones and handheld consoles like GP2X and Pandora), but also runs on non-ARM little-endian hardware too.

The emulator is heavily optimized for ARM, features assembly cores for 68k, Z80 and VDP chip emulation, also has dynamic recompilers for SH2 and SSP16 (for 32X and SVP emulation). It was started by Dave (aka fdave, finalburn author) as basic Genesis/Megadrive emulator for Pocket PC, then taken over and expanded by notaz.

PicoDrive was the first emulator ever to properly emulate Virtua Racing and it’s SVP chip."

Seems to be working fine here (linux amd64):

Oh, my God, do you feel the difference between Linux and Windows? These are TWO different operating systems!!

Yes, my point is that it works fine outside of Android/ARM.

I just tested it on Picodrive core, using Windows 10.

Works fine for me. I don’t know why it doesn’t work for you. Maybe you need/missing bios files?

Yes, the thing is that I have the latest bios, and all the language regions. Moreover, as I was viewing, this problem is still being solved with this kernel. With Android 6.0, the same problem was. I have a question, GemaH, and what is your processor? My AMD Ryzen 5 2500U.

Not only do not run not only Sega 32X games, but also Genesis, too. Only on Windows. On Android, everything works without problems. I have a suspicion that the emulator only works on systems with ARM processors.

Moreover, the error from 2017 is still being solved on GitHub.

Works fine for me on x86_64 linux and works fine for GemaH on x86_64 Win10, so this can’t be the issue. If you post a log you trying and failing to load a game, we can take a look.

I have an i5 4670 with a GTX 1060.

Where are you downoading the core from? Use the built in downloader. Dont downolad if from the github link you posted.

Both 32X and Genesis work fine for me on x86_x64 Windows. 1.9.4 stable. Latest PicoDrive core via the updater.

Try running from a fresh install.

[INFO] [CONTENT LOAD]: Updating firmware status for: D:\RetroArch\cores\picodrive_libretro.dll on D:\RetroArch\system
[INFO] [CORE]: Using content: D:\RetroArch\games\игры SEGA\Sega 32X Roms\Knuckles' Chaotix (32X) (JU) [!].32x.
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading core..
[INFO] [Core]: Unloading core symbols..
[INFO] [Core Options]: Saved core options file to "D:\RetroArch\config\PicoDrive\PicoDrive.opt"
[INFO] [Video]: Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames.
[INFO] RetroArch 1.9.4 (Git b1a3ea7)
[INFO] === Build =======================================
[INFO] CPU Model Name: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx  
[INFO] Возможности:  MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 SSE4.2 AES AVX AVX2
[INFO] Built: May 31 2021
[INFO] Version: 1.9.4
[INFO] Git: b1a3ea7
[INFO] =================================================
[INFO] [Input]: Found input driver: "dinput".
[INFO] [Core]: Loading dynamic libretro core from: "D:\RetroArch\cores\picodrive_libretro.dll"
[INFO] [Overrides]: No core-specific overrides found at "D:\RetroArch\config\PicoDrive\PicoDrive.cfg".
[INFO] [Overrides]: No content-dir-specific overrides found at "D:\RetroArch\config\PicoDrive\Sega 32X Roms.cfg".
[INFO] [Overrides]: No game-specific overrides found at "D:\RetroArch\config\PicoDrive\Knuckles' Chaotix (32X) (JU) [!].cfg".
[INFO] [Environ]: GET_CORE_OPTIONS_VERSION.
[INFO] [Environ]: GET_LANGUAGE: "9".
[INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_INTL.
[INFO] [Remaps]: Remap directory: "D:\RetroArch\config\remaps".
[INFO] [Overrides]: Файл карты памяти перенаправлен в "D:\RetroArch\saves\Knuckles' Chaotix (32X) (JU) [!].srm".
[INFO] [Overrides]: Файл сохранения перенаправлен в "D:\RetroArch\states\Knuckles' Chaotix (32X) (JU) [!].state".
[INFO] [Environ]: PERFORMANCE_LEVEL: 0.
[INFO] [Environ]: GET_LOG_INTERFACE.
[INFO] [Environ]: SET_DISK_CONTROL_INTERFACE.
[INFO] [Environ]: GET_DISK_CONTROL_INTERFACE_VERSION.
[INFO] [Environ]: SET_DISK_CONTROL_EXT_INTERFACE.
[INFO] [CONTENT LOAD]: Загрузка контента пропущена, реализация будет загружена сама по себе.
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] [Environ]: SYSTEM_DIRECTORY: "D:\RetroArch\system".
[libretro ERROR] Failed to detect ROM/CD image type.
[ERROR] [CONTENT LOAD]: Не удалось загрузить контент
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] Версия API libretro: 1
[INFO] Скомпилирован против API: 1
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Vulkan]: Vulkan dynamic library loaded.
[INFO] [Vulkan]: Found vulkan context: vk_w
[INFO] [Vulkan]: Detecting screen resolution 1920x1080.
[INFO] [Vulkan]: Found GPU at index 0: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Using GPU index 0.
[INFO] [Vulkan]: Using GPU: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Queue family 0 supports 16 sub-queues.
[INFO] [Vulkan]: Using resolution 1920x1080
[INFO] [Vulkan]: Using RGB565 format.
[INFO] [Vulkan]: Loading stock shader.
[INFO] [Joypad]: Found joypad driver: "dinput".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Found display server: win32
[INFO] [XAudio2]: Requesting 64 ms latency, using 64 ms latency.
[INFO] [Display]: Found display driver: "vulkan".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [SRAM]: Невозможно сохранить SRAM.
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_music_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_video_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_image_history.lpl].
[INFO] [Playlist]: Загрузка файла избранного: [D:\RetroArch\content_favorites.lpl].
[INFO] [CONTENT LOAD]: Updating firmware status for: D:\RetroArch\cores\picodrive_libretro.dll on D:\RetroArch\system
[INFO] [CORE]: Using content: D:\RetroArch\games\игры SEGA\Sega 32X Roms\Knuckles' Chaotix (32X) (JU) [!].32x.
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading core..
[INFO] [Core]: Unloading core symbols..
[INFO] [Core Options]: Saved core options file to "D:\RetroArch\config\PicoDrive\PicoDrive.opt"
[INFO] [Video]: Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames.
[INFO] RetroArch 1.9.4 (Git b1a3ea7)
[INFO] === Build =======================================
[INFO] CPU Model Name: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx  
[INFO] Возможности:  MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 SSE4.2 AES AVX AVX2
[INFO] Built: May 31 2021
[INFO] Version: 1.9.4
[INFO] Git: b1a3ea7
[INFO] =================================================
[INFO] [Input]: Found input driver: "dinput".
[INFO] [Core]: Loading dynamic libretro core from: "D:\RetroArch\cores\picodrive_libretro.dll"
[INFO] [Overrides]: No core-specific overrides found at "D:\RetroArch\config\PicoDrive\PicoDrive.cfg".
[INFO] [Overrides]: No content-dir-specific overrides found at "D:\RetroArch\config\PicoDrive\Sega 32X Roms.cfg".
[INFO] [Overrides]: No game-specific overrides found at "D:\RetroArch\config\PicoDrive\Knuckles' Chaotix (32X) (JU) [!].cfg".
[INFO] [Environ]: GET_CORE_OPTIONS_VERSION.
[INFO] [Environ]: GET_LANGUAGE: "9".
[INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_INTL.
[INFO] [Remaps]: Remap directory: "D:\RetroArch\config\remaps".
[INFO] [Overrides]: Файл карты памяти перенаправлен в "D:\RetroArch\saves\Knuckles' Chaotix (32X) (JU) [!].srm".
[INFO] [Overrides]: Файл сохранения перенаправлен в "D:\RetroArch\states\Knuckles' Chaotix (32X) (JU) [!].state".
[INFO] [Environ]: PERFORMANCE_LEVEL: 0.
[INFO] [Environ]: GET_LOG_INTERFACE.
[INFO] [Environ]: SET_DISK_CONTROL_INTERFACE.
[INFO] [Environ]: GET_DISK_CONTROL_INTERFACE_VERSION.
[INFO] [Environ]: SET_DISK_CONTROL_EXT_INTERFACE.
[INFO] [CONTENT LOAD]: Загрузка контента пропущена, реализация будет загружена сама по себе.
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] [Environ]: SYSTEM_DIRECTORY: "D:\RetroArch\system".
[libretro ERROR] Failed to detect ROM/CD image type.
[ERROR] [CONTENT LOAD]: Не удалось загрузить контент
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] Версия API libretro: 1
[INFO] Скомпилирован против API: 1
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Vulkan]: Vulkan dynamic library loaded.
[INFO] [Vulkan]: Found vulkan context: vk_w
[INFO] [Vulkan]: Detecting screen resolution 1920x1080.
[INFO] [Vulkan]: Found GPU at index 0: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Using GPU index 0.
[INFO] [Vulkan]: Using GPU: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Queue family 0 supports 16 sub-queues.
[INFO] [Vulkan]: Using resolution 1920x1080
[INFO] [Vulkan]: Using RGB565 format.
[INFO] [Vulkan]: Loading stock shader.
[INFO] [Joypad]: Found joypad driver: "dinput".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Found display server: win32
[INFO] [XAudio2]: Requesting 64 ms latency, using 64 ms latency.
[INFO] [Display]: Found display driver: "vulkan".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [SRAM]: Невозможно сохранить SRAM.
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_music_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_video_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_image_history.lpl].
[INFO] [Playlist]: Загрузка файла избранного: [D:\RetroArch\content_favorites.lpl].

I already did. It didn’t help.

It seems to be having an issue with your ROM:

[libretro ERROR] Failed to detect ROM/CD image type

Think of a broken ROM? Well, I’ll try to download another one.

So, I downloaded ROMs from other resources and, unfortunately, nothing has changed.

[INFO] RetroArch 1.9.4 (Git b1a3ea7)
[INFO] === Build =======================================
[INFO] CPU Model Name: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx  
[INFO] Возможности:  MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 SSE4.2 AES AVX AVX2
[INFO] Built: May 31 2021
[INFO] Version: 1.9.4
[INFO] Git: b1a3ea7
[INFO] =================================================
[INFO] [Input]: Found input driver: "dinput".
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] Версия API libretro: 1
[INFO] Скомпилирован против API: 1
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Vulkan]: Vulkan dynamic library loaded.
[INFO] [Vulkan]: Found vulkan context: vk_w
[INFO] [Vulkan]: Detecting screen resolution 1920x1080.
[INFO] [Vulkan]: Found GPU at index 0: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Using GPU index 0.
[INFO] [Vulkan]: Using GPU: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Queue family 0 supports 16 sub-queues.
[INFO] [Vulkan]: Using resolution 1920x1080
[INFO] [Vulkan]: Using RGB565 format.
[INFO] [Vulkan]: Loading stock shader.
[INFO] [XInput]: Found XInput v1.4.
[INFO] [Joypad]: Found joypad driver: "dinput".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Found display server: win32
[INFO] [XAudio2]: Requesting 64 ms latency, using 64 ms latency.
[INFO] [Display]: Found display driver: "vulkan".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [SRAM]: Невозможно сохранить SRAM.
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_music_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_video_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_image_history.lpl].
[INFO] [Playlist]: Загрузка файла избранного: [D:\RetroArch\content_favorites.lpl].
[INFO] [CONTENT LOAD]: Updating firmware status for: D:\RetroArch\cores\picodrive_libretro.dll on D:\RetroArch\system
[INFO] [CORE]: Using content: D:\RetroArch\games\игры SEGA\Sega 32X Roms\Knuckles' Chaotix (Europe).32x.
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading core..
[INFO] [Core]: Unloading core symbols..
[INFO] [Video]: Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames.
[INFO] RetroArch 1.9.4 (Git b1a3ea7)
[INFO] === Build =======================================
[INFO] CPU Model Name: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx  
[INFO] Возможности:  MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4 SSE4.2 AES AVX AVX2
[INFO] Built: May 31 2021
[INFO] Version: 1.9.4
[INFO] Git: b1a3ea7
[INFO] =================================================
[INFO] [Input]: Found input driver: "dinput".
[INFO] [Core]: Loading dynamic libretro core from: "D:\RetroArch\cores\picodrive_libretro.dll"
[INFO] [Overrides]: No core-specific overrides found at "D:\RetroArch\config\PicoDrive\PicoDrive.cfg".
[INFO] [Overrides]: No content-dir-specific overrides found at "D:\RetroArch\config\PicoDrive\Sega 32X Roms.cfg".
[INFO] [Overrides]: No game-specific overrides found at "D:\RetroArch\config\PicoDrive\Knuckles' Chaotix (Europe).cfg".
[INFO] [Environ]: GET_CORE_OPTIONS_VERSION.
[INFO] [Environ]: GET_LANGUAGE: "9".
[INFO] [Environ]: RETRO_ENVIRONMENT_SET_CORE_OPTIONS_INTL.
[INFO] [Remaps]: Remap directory: "D:\RetroArch\config\remaps".
[INFO] [Overrides]: Файл карты памяти перенаправлен в "D:\RetroArch\saves\Knuckles' Chaotix (Europe).srm".
[INFO] [Overrides]: Файл сохранения перенаправлен в "D:\RetroArch\states\Knuckles' Chaotix (Europe).state".
[INFO] [Environ]: PERFORMANCE_LEVEL: 0.
[INFO] [Environ]: GET_LOG_INTERFACE.
[INFO] [Environ]: SET_DISK_CONTROL_INTERFACE.
[INFO] [Environ]: GET_DISK_CONTROL_INTERFACE_VERSION.
[INFO] [Environ]: SET_DISK_CONTROL_EXT_INTERFACE.
[INFO] [CONTENT LOAD]: Загрузка контента пропущена, реализация будет загружена сама по себе.
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] [Environ]: SYSTEM_DIRECTORY: "D:\RetroArch\system".
[libretro ERROR] Failed to detect ROM/CD image type.
[ERROR] [CONTENT LOAD]: Не удалось загрузить контент
[INFO] [Environ]: SET_PIXEL_FORMAT: RGB565.
[INFO] Версия API libretro: 1
[INFO] Скомпилирован против API: 1
[INFO] [Audio]: Set audio input rate to: 48000.00 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Vulkan]: Vulkan dynamic library loaded.
[INFO] [Vulkan]: Found vulkan context: vk_w
[INFO] [Vulkan]: Detecting screen resolution 1920x1080.
[INFO] [Vulkan]: Found GPU at index 0: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Using GPU index 0.
[INFO] [Vulkan]: Using GPU: NVIDIA GeForce GTX 1050
[INFO] [Vulkan]: Queue family 0 supports 16 sub-queues.
[INFO] [Vulkan]: Using resolution 1920x1080
[INFO] [Vulkan]: Using RGB565 format.
[INFO] [Vulkan]: Loading stock shader.
[INFO] [Joypad]: Found joypad driver: "dinput".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Found display server: win32
[INFO] [XAudio2]: Requesting 64 ms latency, using 64 ms latency.
[INFO] [Display]: Found display driver: "vulkan".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [SRAM]: Невозможно сохранить SRAM.
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_music_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_video_history.lpl].
[INFO] [Playlist]: Загрузка файла истории: [D:\RetroArch\content_image_history.lpl].
[INFO] [Playlist]: Загрузка файла избранного: [D:\RetroArch\content_favorites.lpl].
[INFO] [Config]: Новая конфигурация сохранена в "D:\RetroArch\retroarch.cfg".
[INFO] [Core]: Content ran for a total of: 00 hours, 00 minutes, 00 seconds.
[INFO] [Core]: Unloading core..
[INFO] [Core]: Unloading core symbols..
[INFO] [Core Options]: Saved core options file to "D:\RetroArch\config\PicoDrive\PicoDrive.opt"
[INFO] [Video]: Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames.
[INFO] [Video]: Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames.

You got the same error. I don’t know where you download roms from. Try using a rom from a verified source like the No-Intro set.

Also, you said you got the bios already but is it the correct file? And is it correctly named?

2 Likes

SERIOUSLY!? That is, in order for the emulator to work properly, you had to download No-Intro ROMs!? And it was possible to write IT in DOCS!? Higher Powers!

Okay, everything works now and thanks for that! 38^)

Also, as I found out, it is better to put the folder with 32X separately in a non-Russian folder.