[ 1.374434] ata1: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 24
[ 1.374436] ata2: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 24
[ 1.374897] pata_amd 0000:00:06.0: version 0.4.1
[ 1.375663] scsi host2: pata_amd
[ 1.375845] scsi host3: pata_amd
[ 1.375927] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 1.375929] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 1.376658] tun: Universal TUN/TAP device driver, 1.6
[ 1.376810] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
[ 1.376875] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 1.376876] Copyright (c) 2007 Atheros Corporation.
[ 1.377115] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 1.377213] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 1.377250] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.377252] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.377290] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.377291] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.377329] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.377329] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.377371] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.377372] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.377412] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5 .0.0-k
[ 1.377413] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 1.377516] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 1.377517] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 1.377550] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 1.377622] sky2: driver version 1.30
[ 1.377690] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.6 4.
[ 1.378074] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 1.685496] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.685529] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.733178] ata2.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 1.733181] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.735231] ata2.00: configured for UDMA/133
[ 1.735541] scsi 1:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ : 0 ANSI: 5
[ 1.735992] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.735995] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.736030] sd 1:0:0:0: [sda] Write Protect is off
[ 1.736032] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.736064] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 1.736265] ata4: port disabled--ignoring
[ 1.738414] sda: sda1 sda2
[ 1.739054] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.900942] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1 f:16:64:0c:bf
[ 1.900945] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc- v3
[ 1.901327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.901329] ehci-pci: EHCI PCI platform driver
[ 1.901559] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 1.901570] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus numbe r 1
[ 1.901583] ehci-pci 0000:00:02.1: debug port 1
[ 1.901613] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 1.901732] ehci-pci 0000:00:02.1: irq 17, io mem 0xc0007000
[ 1.908042] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.908394] hub 1-0:1.0: USB hub found
[ 1.908406] hub 1-0:1.0: 3 ports detected
[ 1.908838] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 1.908848] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus numbe r 2
[ 1.908860] ehci-pci 0000:00:04.1: debug port 1
[ 1.908894] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[ 1.909031] ehci-pci 0000:00:04.1: irq 16, io mem 0xc0007400
[ 1.916036] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.916409] hub 2-0:1.0: USB hub found
[ 1.916421] hub 2-0:1.0: 4 ports detected
[ 1.916718] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.916728] ohci-pci: OHCI PCI platform driver
[ 1.916879] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 1.916887] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus numbe r 3
[ 1.916978] ohci-pci 0000:00:02.0: irq 17, io mem 0xc0006000
[ 1.970373] hub 3-0:1.0: USB hub found
[ 1.970385] hub 3-0:1.0: 3 ports detected
[ 1.970737] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 1.970745] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus numbe r 4
[ 1.970845] ohci-pci 0000:00:04.0: irq 16, io mem 0xc0008000
[ 2.024385] hub 4-0:1.0: USB hub found
[ 2.024397] hub 4-0:1.0: 4 ports detected
[ 2.024676] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.024790] usbcore: registered new interface driver uas
[ 2.024834] usbcore: registered new interface driver usb-storage
[ 2.024900] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0 x64 irq 1,12
[ 2.043501] i8042: Detected active multiplexing controller, rev 1.1
[ 2.055163] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.055233] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.055298] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.055360] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.055421] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.055578] mousedev: PS/2 mouse device common for all mice
[ 2.056256] rtc_cmos 00:02: RTC can wake from S4
[ 2.056581] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.056687] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.056720] i2c /dev entries driver
[ 2.057445] i2c i2c-7: nForce2 SMBus adapter at 0x3040
[ 2.057552] i2c i2c-8: nForce2 SMBus adapter at 0x3000
[ 2.057730] sdhci: Secure Digital Host Controller Interface driver
[ 2.057732] sdhci: Copyright(c) Pierre Ossman
[ 2.057860] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.057863] No iBFT detected.
[ 2.057885] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.058850] usbcore: registered new interface driver usbhid
[ 2.058851] usbhid: USB HID core driver
[ 2.059509] NET: Registered protocol family 10
[ 2.059934] Segment Routing with IPv6
[ 2.059961] NET: Registered protocol family 17
[ 2.060047] Key type dns_resolver registered
[ 2.060282] microcode: CPU0: patch_level=0x02000057
[ 2.060290] microcode: CPU1: patch_level=0x02000057
[ 2.060362] microcode: Microcode Update Driver: v2.2.
[ 2.061359] Btrfs loaded, crc32c=crc32c-generic
[ 2.061774] console [netcon0] enabled
[ 2.061776] netconsole: network logging started
[ 2.061863] rtc_cmos 00:02: setting system clock to 2017-12-01 12:01:46 UTC ( 1512129706)
[ 2.062039] acpi_cpufreq: overriding BIOS provided _PSD data
[ 2.062265] ALSA device list:
[ 2.062267] No soundcards found.
[ 2.066944] Freeing unused kernel memory: 3468K
[ 2.066948] Write protecting the kernel read-only data: 40960k
[ 2.069335] Freeing unused kernel memory: 1500K
[ 2.074744] Freeing unused kernel memory: 1336K
[ 2.082803] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se rio0/input/input5
[ 2.224036] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.359833] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.360025] scsi host4: usb-storage 1-1:1.0
[ 2.400028] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 2.608838] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/00 00:00:04.0/usb4/4-1/4-1:1.0/0003:0603:0002.0001/input/input11
[ 2.660355] hid-generic 0003:0603:0002.0001: input,hidraw0: USB HID v1.10 Key board [SINO WEALTH USB Composite Device] on usb-0000:00:04.0-1/input0
[ 2.669506] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/00 00:00:04.0/usb4/4-1/4-1:1.1/0003:0603:0002.0002/input/input13
[ 2.721371] hid-generic 0003:0603:0002.0002: input,hiddev0,hidraw1: USB HID v 1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:04.0-1/input1
[ 2.960039] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 3.391174] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibi lities
[ 3.392226] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibi lities
[ 3.413775] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.427680] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ : 0 ANSI: 0 CCS
[ 3.429187] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 3.433052] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.872514] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibi lities
[ 3.872898] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibi lities
[ 3.974413] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.249220] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SEL INUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL - XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 8.249497] systemd[1]: Detected architecture x86-64.
[ 8.249879] systemd[1]: Set hostname to <Lakka>.
[ 8.357778] systemd[1]: Listening on udev Control Socket.
[ 8.392726] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.392774] systemd[1]: Reached target Swap.
[ 8.393566] systemd[1]: Created slice System Slice.
[ 8.394934] systemd[1]: Mounting Variable Directory...
[ 8.396758] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.398249] systemd[1]: Mounting Temporary Directory...
[ 8.668748] systemd-journald[257]: Received request to flush runtime journal from PID 1
[ 10.602726] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 10.606952] snd_hda_intel 0000:00:07.0: Disabling MSI
[ 10.732380] 8192eu: loading out-of-tree module taints kernel.
[ 10.789511] RTL871X: module init start
[ 10.789516] RTL871X: rtl8192eu v4.4.1_17696.20160509_BTCOEX20160412-0042
[ 10.789518] RTL871X: build time: Nov 18 2017 21:13:33
[ 10.789519] RTL871X: rtl8192eu BT-Coex version = BTCOEX20160412-0042
[ 10.955625] forcedeth 0000:00:0a.0 eth0: MSI enabled
[ 10.955913] forcedeth 0000:00:0a.0 eth0: no link during initialization
[ 10.956397] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.971666] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto- probing.[ 11.019075] RTL871X: hal_com_config_channel_plan chplan:0x21
[ 11.023654] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023659] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023660] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023661] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023662] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023664] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023665] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023666] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023667] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023668] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023670] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023671] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023672] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023673] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023674] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023675] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023676] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023678] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023679] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023680] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023681] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023682] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023684] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023685] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023686] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023687] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023688] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023690] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023691] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023692] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023693] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023694] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023696] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023697] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023698] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023699] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023700] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023701] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023702] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023703] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023705] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023706] RTL871X: Wrong rate section: (CCK,2T)
[ 11.023714] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023715] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023717] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023718] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023719] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023720] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023721] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023723] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023724] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023725] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023726] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023728] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023729] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023730] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023731] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023732] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023733] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023734] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023735] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023737] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023738] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023739] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023740] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023742] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023743] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023744] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023745] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023747] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023748] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023749] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023750] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023751] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023753] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023754] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023755] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023756] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023757] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023759] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023760] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023761] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023762] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023763] RTL871X: Wrong rate section: (OFDM,2T)
[ 11.023779] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 01]
[ 11.023781] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 01]
[ 11.023782] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 01]
[ 11.023784] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 02]
[ 11.023786] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 02]
[ 11.023788] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 02]
[ 11.023789] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 03]
[ 11.023791] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 03]
[ 11.023793] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 03]
[ 11.023795] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 04]
[ 11.023797] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 04]
[ 11.023799] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 04]
[ 11.023801] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 05]
[ 11.023803] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 05]
[ 11.023805] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 05]
[ 11.023807] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 06]
[ 11.023809] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 06]
[ 11.023810] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 06]
[ 11.023812] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 07]
[ 11.023814] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 07]
[ 11.023816] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 07]
[ 11.023818] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 08]
[ 11.023820] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 08]
[ 11.023822] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 08]
[ 11.023824] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 09]
[ 11.023826] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 09]
[ 11.023828] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 09]
[ 11.023830] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 10]
[ 11.023832] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 10]
[ 11.023834] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 10]
[ 11.023836] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 20M][rate section HT][rf path 2T][chnl 11]
[ 11.023838] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 11]
[ 11.023840] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 11]
[ 11.023842] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 12]
[ 11.023844] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 12]
[ 11.023846] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 20M][rate section HT][rf path 2T][chnl 13]
[ 11.023848] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 20M][rate section HT][rf path 2T][chnl 13]
[ 11.023865] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 03]
[ 11.023867] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 03]
[ 11.023869] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 03]
[ 11.023871] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 04]
[ 11.023872] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 04]
[ 11.023874] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 04]
[ 11.023876] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 05]
[ 11.023878] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 05]
[ 11.023880] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 05]
[ 11.023881] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 06]
[ 11.023883] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 06]
[ 11.023885] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 06]
[ 11.023887] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 07]
[ 11.023888] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 07]
[ 11.023890] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 07]
[ 11.023892] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 08]
[ 11.023893] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 08]
[ 11.023895] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 08]
[ 11.023897] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 09]
[ 11.023899] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 09]
[ 11.023901] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 09]
[ 11.023902] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 10]
[ 11.023904] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 10]
[ 11.023906] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 10]
[ 11.023908] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion FCC][bw 40M][rate section HT][rf path 2T][chnl 11]
[ 11.023909] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion ETSI][bw 40M][rate section HT][rf path 2T][chnl 11]
[ 11.023911] RTL871X: duplicate tx power limit combination [band 2.4G][regulat ion MKK][bw 40M][rate section HT][rf path 2T][chnl 11]
[ 11.045289] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=d4:6e:0e:10:c2:54
[ 11.051050] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermo sa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 11.051055] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x 0/0x0/0x0)
[ 11.051058] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x 0/0x0)
[ 11.051060] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 11.051062] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 11.051065] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 11.051068] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x17
[ 11.076386] usbcore: registered new interface driver rtl8192eu
[ 11.076391] RTL871X: module init ret=0
[ 11.116068] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 11.384137] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sou nd/card0/input16
[ 11.385087] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/sound/c ard0/input17
[ 11.385281] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/s ound/card0/input18
[ 12.905943] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.837458] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
[ 13.899605] RTL871X: start auth
[ 13.902831] RTL871X: auth success, start assoc
[ 13.907620] RTL871X: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[ 13.907631] RTL871X: assoc success
[ 13.907762] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.912116] RTL871X: recv eapol packet
[ 13.912781] RTL871X: send eapol packet
[ 13.921976] RTL871X: recv eapol packet
[ 13.922454] RTL871X: send eapol packet
[ 13.943717] RTL871X: set pairwise key camid:4, addr:70:50:af:0a:c4:5d, kid:0, type:AES
[ 13.945951] RTL871X: set group key camid:5, addr:70:50:af:0a:c4:5d, kid:1, ty pe:AES
Lakka:~ #I istal 2.0 in one hdd and 2.1 on another one i see on 2.0 kms on video and working perfect on 2.1 is x on video is posible to change x whit kms to work in 2.1. Thank u for evrything.
We are using KMS on Generic platform, we didn’t change it for 2.1.
Where did you find this information ?
I discover by miself i install lakka 2.0 on the hp g6 motherboard the motherboard what i don have hdmi signal whit lakka 2.1 and on another laptop Samsung lakka 2.1 what on this one work perfecly and i start to put head to head all the option from menu on video section and driver section On lakka 2.0 i find “kms” whit “gl” on video card and on second laptop whit lakka 2.1 i find “x” whit “gl” what “x” i don have any ideea what is it. Thank u for u help still working to make the hdmi to work on lakka 2.1 and on libreelec 8.2.1 after the splash logo whit libreelec again no signal amd the same on xander the hdmi ia connected. Maime my gpu nvidia 8200 is not compatible whit the kernel. Thank u again for u help
Ah ok in Main tab > Information > System Information. Yes we have some X related option enabled for X Keyboard extension (used for OSD Keyboard) but we are not using Xorg.
Try to boot with those options in the cmdline
live debugging textmode nosplash
then edit configuration file
nano .config/retroarch/retroarch.cfg #change value video_monitor_index to 1
LIBGL_DEBUG=verbose retroarch --menu --verbose 2>&1
If it doesn’t work try
systemctl stop retroarch
nano .config/retroarch/retroarch.cfg #change value video_monitor_index to 2
LIBGL_DEBUG=verbose retroarch --menu --verbose 2>&1
And provide the log with options video_monitor_index = “1” and with video_monitor_index = “2”
Thank you.
Thank u im gone try …to see what hapend…and becouze i read on lakka forum somthing lakka working on libreelec 8.2 i install libreelec 8.2.1 generic x86_64 on that motherboard and surprize i see the libreelec splah screen andin the right corner libreelec comunity and after black screen again. Thus make me wondering if my nvidia 8200 gpu is supprted by the new kernel. Thank u for your help u are an angel helping me im gone try evrything what is posible
Im sorry i responds so late Yes, try this comand live debugging yextmode nosplash amd the same result black screen whit no signal message. My biggest questions is becouze i build this sistem for 16 kids whit disabilities " IS POSIBLE TO INSTALL RETROARH 1.6.9 ON LAKKA 2.0 " PLS TELL IF IS POSSIBLE AND HOW… i what to fiinish util Christmas to offer this prezent to kids… evrifing is instaleed the video projector and screen 4 xbox remote plus a 5.1 sound sistem… so PLS HELP THANK U VERRY MUCH
i whant to wish you a merry Christmas and send u thousands of thank u for your help in our project.thw kids are happy whit the games playing evry day.
still if u what to help me to underatand if i can use the joystick and not d pads will be wonderful but maibe next year.
i wish u mwrry Christmas to u and your team amd evryone close to u
MERRY CHRISTMAS
Hi,
No problem you are welcome, but we will have to get some log to help you.
Happy holiday season !
new dell inspirion n5040 4 gb ram p6200 2.3 ghz i wll come whit updates about issues. thank u for your help.
good news 2.1 work perfectly but i don have wifi instead of my network name ihave just sign ???$@&^!@