New sonkun crt guest advanced hd presets thread

I am not sure still images from 1 crt is definite proof. I am sure tvs handle the inputs different, and on top of that s-video cable quality is more important than RGB cable quality. It could very much be that most s-video cables we got hold of was subpar. But as commented in the thread, some games was worse and overalll you could still get color bleed with s-video.

I am talking about always getting the s-video and the RGB cable for every system that supports it and IRL the difference is worth it and it is clearly seen.

In europe (Sweden) almost no tvs supported component so it was always a case of composite, S-video or RGB (if supported by the system). Often the S-video cable was released first (or came from 3d party first/became available in Sweden first) and only after a while would I be able to source an RGB scart. Back then we didnt have the internet and e-shopping. It was a hassle, but im telling you it was worth it.

1 Like

New Version Release (11/07/2022)

Changes Made

Swapped out both the “checkerboard dedither” and “sgenpt-mix” shader in all svideo presets and put in @Hyllian’s new “sgenpt-mix multipass” shader since going forward the checkerboard dedither shader will become obsolete.

Removed the noise settings from the composite presets, it’s really not needed plus I gained a tiny bit of brightness back after removing it.

Grab the new pack in the first post.

Be sure to update your slang shaders as well.

4 Likes

Hi there.

Is there a way to edit the composite preset so that there is less/no rainbow effect? I prefer the mame-ntsc over dedither, but I don’t really like the extreme rainbow effect that you see with genesis games that have a lot of dithering.

The shader look really nice otherwise!

1 Like

Easiest way to get rid of the rainbow banding effects while still keeping the dithering effects is to go into the parameters and look for “Scan Time”, press start on that to bring it back to default. Your picture will now look really sharp then head further down to “Internal Resolution” and raise that up to about 1.50 or to where you want it to be and it should now look like this:

Thank you I’m glad you’re liking the shaders. I just finished putting the finishing touches on my next shader pack update, I also see that guest uploaded a new update to his shader as well which I will check out. If things go as planned hopefully I’ll upload my new pack tonight the earliest or tomorrow the latest so be on the look out soon.

2 Likes

New Version Release (11/15/2022)

Changes Made

Uses @guest.r latest shader update version (2022-11-14-r1)

Tweaked contrast, brightness and sharpness settings, basically we’re going from this:

Previous settings:

to this:

You all can grab the new link in the usual post.

7 Likes

This morning trying the Sonkun presets.

For 1080p TV game mode or Monitor settings , back light high, color midle, brightness low, some others in the midle.

Sonkun number 24 preset.

as you can see in the capture the pixels of the players/sprites of the models in this Street Fighter 2 arcade game, they look too much, as if they had neither scan lines nor masking and that the presets have it, tou need to disimulate this touchin halationn or bloom or whatever suits your tastes or presets.

in my screen the presets was lots of brighness, this is not good for 2d games, i told that one time when in write in this forum for the first time.

And the mask, talkint in arcade mode, need to be more noticeable, in a arcade CRT of the 80 years like arcade SFII, more curvature, round corners, vigneting.

The border of the presets as big and heat lot of screen, as vigneting if yoy abuse like as me modifing your preset.

mine from you preset, default curvature not distortion, more dark, vibrance, rounded, old.

Thanks.we keep improving and applying the improvements that the developers make. :+1:

1 Like

Interesting. Why are you using the back light settings on your monitor? That’s why I even tweaked those brightness settings, my shaders aim to just set it and forget it and to tweak settings within the shader itself instead of having to calibrate your tv. Maybe I should make a disclaimer in the future about that even though I know no one monitor is the same. As far as curvature that’s way too much for me and I stopped using vignette a while back since I’m going for a cleaner clear look. As for the scanlines I had to find a balance to reduce moire as much as possible since I do use curvature settings so the scanlines are not “thick” by design.

Also those “alt” presets was just a bonus I added in, I was inspired to make that preset when a user here posted a screenshot of an actual crt that seemed to have this “peach” colored hue all around. It may have just been an effect of the camera used to make the screenshot look that way but I liked it regardless and made a preset like it, nothing to really use seriously unless you like it of course.

My presets constantly go through changes, just like with this pack I cranked the contrast up in the negative values cause I wanted to try something different and I liked how it looked, I also turned the glow sigma down both vertically and horizontally to give me a sharper look in the svideo and rgb presets. Mind posting your settings for your screenshot so I can see it in action? It looks like you also used contrast as well.

1 Like

Here is , not ended only retouch your preset a bit

I use the back light in high because of the look of the mask in movement and visualization that need to fit in good with other values, also for my good one mame hlsl MSDOS mask, need to be high values, 80 % or more.

Yes no one monitor are the same, colors, etc. and when you touch a " thing" of the shader for a correct similutude wirh and crt screen, anotherf “thing” appear that you need to fix etc.

shaders = "10"
shader0 = "shaders_slang/crt/shaders/guest/hd/stock.slang"
filter_linear0 = "false"
wrap_mode0 = "clamp_to_border"
mipmap_input0 = "false"
alias0 = ""
float_framebuffer0 = "false"
srgb_framebuffer0 = "false"
scale_type_x0 = "source"
scale_x0 = "1.000000"
scale_type_y0 = "source"
scale_y0 = "1.000000"
shader1 = "shaders_slang/crt/shaders/guest/hd/stock.slang"
filter_linear1 = "false"
wrap_mode1 = "clamp_to_border"
mipmap_input1 = "false"
alias1 = "StockPass"
float_framebuffer1 = "false"
srgb_framebuffer1 = "false"
scale_type_x1 = "source"
scale_x1 = "1.000000"
scale_type_y1 = "source"
scale_y1 = "1.000000"
shader2 = "shaders_slang/crt/shaders/guest/hd/afterglow0.slang"
filter_linear2 = "false"
wrap_mode2 = "clamp_to_border"
mipmap_input2 = "false"
alias2 = "AfterglowPass"
float_framebuffer2 = "false"
srgb_framebuffer2 = "false"
scale_type_x2 = "source"
scale_x2 = "1.000000"
scale_type_y2 = "source"
scale_y2 = "1.000000"
shader3 = "shaders_slang/crt/shaders/guest/advanced/grade/pre-shaders-afterglow-grade.slang"
filter_linear3 = "false"
wrap_mode3 = "clamp_to_border"
mipmap_input3 = "true"
alias3 = "PrePass"
float_framebuffer3 = "false"
srgb_framebuffer3 = "false"
scale_type_x3 = "source"
scale_x3 = "1.000000"
scale_type_y3 = "source"
scale_y3 = "1.000000"
shader4 = "shaders_slang/crt/shaders/guest/hd/linearize-hd.slang"
filter_linear4 = "true"
wrap_mode4 = "clamp_to_border"
mipmap_input4 = "false"
alias4 = "LinearizePass"
float_framebuffer4 = "true"
srgb_framebuffer4 = "false"
scale_type_x4 = "source"
scale_x4 = "1.000000"
scale_type_y4 = "source"
scale_y4 = "1.000000"
shader5 = "shaders_slang/crt/shaders/guest/hd/crt-guest-advanced-hd-pass1.slang"
filter_linear5 = "true"
wrap_mode5 = "clamp_to_border"
mipmap_input5 = "false"
alias5 = "Pass1"
float_framebuffer5 = "true"
srgb_framebuffer5 = "false"
scale_type_x5 = "viewport"
scale_x5 = "1.000000"
scale_type_y5 = "source"
scale_y5 = "1.000000"
shader6 = "shaders_slang/crt/shaders/guest/hd/bloom_horizontal.slang"
filter_linear6 = "true"
wrap_mode6 = "clamp_to_border"
mipmap_input6 = "false"
alias6 = ""
float_framebuffer6 = "true"
srgb_framebuffer6 = "false"
scale_type_x6 = "absolute"
scale_x6 = "800"
scale_type_y6 = "source"
scale_y6 = "1.000000"
shader7 = "shaders_slang/crt/shaders/guest/hd/bloom_vertical.slang"
filter_linear7 = "true"
wrap_mode7 = "clamp_to_border"
mipmap_input7 = "false"
alias7 = "BloomPass"
float_framebuffer7 = "true"
srgb_framebuffer7 = "false"
scale_type_x7 = "source"
scale_x7 = "1.000000"
scale_type_y7 = "absolute"
scale_y7 = "600"
shader8 = "shaders_slang/crt/shaders/guest/hd/crt-guest-advanced-hd-pass2.slang"
filter_linear8 = "true"
wrap_mode8 = "clamp_to_border"
mipmap_input8 = "false"
alias8 = ""
float_framebuffer8 = "true"
srgb_framebuffer8 = "false"
scale_type_x8 = "viewport"
scale_x8 = "1.000000"
scale_type_y8 = "viewport"
scale_y8 = "1.000000"
shader9 = "shaders_slang/crt/shaders/guest/hd/deconvergence-hd.slang"
filter_linear9 = "true"
wrap_mode9 = "clamp_to_border"
mipmap_input9 = "false"
alias9 = ""
float_framebuffer9 = "false"
srgb_framebuffer9 = "false"
scale_type_x9 = "viewport"
scale_x9 = "1.000000"
scale_type_y9 = "viewport"
scale_y9 = "1.000000"
bogus_afterglow = "1.000000"
PR = "0.450000"
PG = "0.400000"
PB = "0.400000"
g_gamma_in = "1.800000"
g_signal_type = "0.000000"
g_crtgamut = "-4.000000"
g_vstr = "50.000000"
g_vpower = "0.500000"
g_cntrst = "0.050000"
wp_temperature = "9304.000000"
g_sat = "-0.200000"
g_lift = "-0.030000"
SIGMA_HOR = "0.325000"
S_SHARP = "2.000000"
HARNG = "4.000000"
warpX = "0.130000"
warpY = "0.150000"
csize = "0.065000"
bsize1 = "0.000000"
sborder = "0.250000"
barspeed = "200.000000"
barintensity = "0.020000"
glow = "0.350000"
bloom = "-0.300000"
halation = "0.150000"
gamma_c = "1.080000"
scanline1 = "5.000000"
shadowMask = "8.000000"
maskstr = "1.000000"
slotmask = "1.000000"
slotmask1 = "1.000000"
slotwidth = "3.000000"
double_slot = "2.000000"
gamma_out = "1.300000"
deconrry = "0.500000"
deconrgy = "-0.500000"
deconrby = "0.500000"
post_br = "1.250000"
textures = "SamplerLUT1;SamplerLUT2;SamplerLUT3;SamplerLUT4"
SamplerLUT1 = "shaders_slang/crt/shaders/guest/advanced/lut/trinitron-lut.png"
SamplerLUT1_linear = "true"
SamplerLUT1_wrap_mode = "clamp_to_border"
SamplerLUT1_mipmap = "false"
SamplerLUT2 = "shaders_slang/crt/shaders/guest/advanced/lut/inv-trinitron-lut.png"
SamplerLUT2_linear = "true"
SamplerLUT2_wrap_mode = "clamp_to_border"
SamplerLUT2_mipmap = "false"
SamplerLUT3 = "shaders_slang/crt/shaders/guest/advanced/lut/nec-lut.png"
SamplerLUT3_linear = "true"
SamplerLUT3_wrap_mode = "clamp_to_border"
SamplerLUT3_mipmap = "false"
SamplerLUT4 = "shaders_slang/crt/shaders/guest/advanced/lut/ntsc-lut.png"
SamplerLUT4_linear = "true"
SamplerLUT4_wrap_mode = "clamp_to_border"
SamplerLUT4_mipmap = "false"

Im working in another warm presets as this one

or this

One of the first and easy that i was made with guest filter, those of abobe are best and more worked, and more warm too.

2 Likes

Nice. I’ll try it out later when I get home. I get a “vintage” vibe from your screenshots and I like that.

2 Likes

Thanks for the quick answer! So I did as you told: press start (I get 52.60) and change resolution to 1.50, but now I have this.

Also I was wondering if you plan to work on the aperture grille preset you uploaded a bit earlier.

Also, do you guys know how to upload a file as png instead of jpeg?

Try changing to 0, not 52.60, it should work.

1 Like

I tried bringing it down to 0 and you get a black screen lol. @SuperieurUltra try this way as well. Load up the composite preset, go into the parameters and the second option “TVOut Composite Enable” turn that off. It won’t completely get rid of the rainbow effect but it will drastically reduce it. If you want to take it a step further and really make it disappear go up to “TVOut Signal Resolution” and bring that down to 192.00, you’ll also get a blurrier image as a trade off.

Another option is to press start on Scan Time and then turn off TVOut Composite Enable.

You can also turn off NTSC Signal Mode and then either put TVOut Signal Resolution to 192.00 or go down to Internal Resolution to 1.30-1.50 or to desired look.

Also for the record in case you want to tweak the mame ntsc settings I’ll list all the settings that work, 90 percent of the rest of the settings are disabled by default even if you try to tweak them:

NTSC Signal Mode, A Value, B Value, CC Value, O Value, P Value, Scan Time, Notch Half Width, Y Freq Response, I Freq Response, Q Freq Response, Signal Offset.

As for the aperture grille preset I still have that in the back of my mind, if I do make presets I’ll bundle them up and include them with the slot mask presets and make one folder for each, the aperture grille presets would also come with cool and warm preset types just like the slot mask ones. Sounds like a fun idea the more I think of it.

I used these settings I believe plus I used some of the settings I used in my latest slot mask pack to make a quick rgb aperture grille preset:

shaders = "10"
shader0 = "shaders_slang/crt/shaders/guest/hd/stock.slang"
filter_linear0 = "false"
wrap_mode0 = "clamp_to_border"
mipmap_input0 = "false"
alias0 = ""
float_framebuffer0 = "false"
srgb_framebuffer0 = "false"
scale_type_x0 = "source"
scale_x0 = "1.000000"
scale_type_y0 = "source"
scale_y0 = "1.000000"
shader1 = "shaders_slang/crt/shaders/guest/hd/stock.slang"
filter_linear1 = "false"
wrap_mode1 = "clamp_to_border"
mipmap_input1 = "false"
alias1 = "StockPass"
float_framebuffer1 = "false"
srgb_framebuffer1 = "false"
scale_type_x1 = "source"
scale_x1 = "1.000000"
scale_type_y1 = "source"
scale_y1 = "1.000000"
shader2 = "shaders_slang/crt/shaders/guest/hd/afterglow0.slang"
filter_linear2 = "false"
wrap_mode2 = "clamp_to_border"
mipmap_input2 = "false"
alias2 = "AfterglowPass"
float_framebuffer2 = "false"
srgb_framebuffer2 = "false"
scale_type_x2 = "source"
scale_x2 = "1.000000"
scale_type_y2 = "source"
scale_y2 = "1.000000"
shader3 = "shaders_slang/crt/shaders/guest/advanced/grade/pre-shaders-afterglow-grade.slang"
filter_linear3 = "false"
wrap_mode3 = "clamp_to_border"
mipmap_input3 = "true"
alias3 = "PrePass"
float_framebuffer3 = "false"
srgb_framebuffer3 = "false"
scale_type_x3 = "source"
scale_x3 = "1.000000"
scale_type_y3 = "source"
scale_y3 = "1.000000"
shader4 = "shaders_slang/crt/shaders/guest/hd/linearize-hd.slang"
filter_linear4 = "true"
wrap_mode4 = "clamp_to_border"
mipmap_input4 = "false"
alias4 = "LinearizePass"
float_framebuffer4 = "true"
srgb_framebuffer4 = "false"
scale_type_x4 = "source"
scale_x4 = "1.000000"
scale_type_y4 = "source"
scale_y4 = "1.000000"
shader5 = "shaders_slang/crt/shaders/guest/hd/crt-guest-advanced-hd-pass1.slang"
filter_linear5 = "true"
wrap_mode5 = "clamp_to_border"
mipmap_input5 = "false"
alias5 = "Pass1"
float_framebuffer5 = "true"
srgb_framebuffer5 = "false"
scale_type_x5 = "viewport"
scale_x5 = "1.000000"
scale_type_y5 = "source"
scale_y5 = "1.000000"
shader6 = "shaders_slang/crt/shaders/guest/hd/bloom_horizontal.slang"
filter_linear6 = "true"
wrap_mode6 = "clamp_to_border"
mipmap_input6 = "false"
alias6 = ""
float_framebuffer6 = "true"
srgb_framebuffer6 = "false"
scale_type_x6 = "absolute"
scale_x6 = "800"
scale_type_y6 = "source"
scale_y6 = "1.000000"
shader7 = "shaders_slang/crt/shaders/guest/hd/bloom_vertical.slang"
filter_linear7 = "true"
wrap_mode7 = "clamp_to_border"
mipmap_input7 = "false"
alias7 = "BloomPass"
float_framebuffer7 = "true"
srgb_framebuffer7 = "false"
scale_type_x7 = "source"
scale_x7 = "1.000000"
scale_type_y7 = "absolute"
scale_y7 = "600"
shader8 = "shaders_slang/crt/shaders/guest/hd/crt-guest-advanced-hd-pass2.slang"
filter_linear8 = "true"
wrap_mode8 = "clamp_to_border"
mipmap_input8 = "false"
alias8 = ""
float_framebuffer8 = "true"
srgb_framebuffer8 = "false"
scale_type_x8 = "viewport"
scale_x8 = "1.000000"
scale_type_y8 = "viewport"
scale_y8 = "1.000000"
shader9 = "shaders_slang/crt/shaders/guest/hd/deconvergence-hd.slang"
filter_linear9 = "true"
wrap_mode9 = "clamp_to_border"
mipmap_input9 = "false"
alias9 = ""
float_framebuffer9 = "false"
srgb_framebuffer9 = "false"
scale_type_x9 = "viewport"
scale_x9 = "1.000000"
scale_type_y9 = "viewport"
scale_y9 = "1.000000"
g_signal_type = "0.000000"
g_crtgamut = "0.000000"
g_vignette = "0.000000"
g_cntrst = "-0.300000"
wp_temperature = "9304.000000"
g_lift = "-0.030000"
SIGMA_HOR = "0.325000"
S_SHARP = "2.000000"
HARNG = "4.000000"
spike = "1.500000"
SIGMA_HB = "0.250000"
SIGMA_VB = "0.250000"
warpX = "0.050000"
warpY = "0.070000"
csize = "0.025000"
bsize1 = "0.200000"
glow = "0.160000"
bloom = "-0.800000"
bloom_dist = "0.400000"
gamma_c = "1.250000"
brightboost = "1.000000"
brightboost1 = "1.200000"
scanline1 = "2.500000"
scanline2 = "14.000000"
beam_min = "1.799999"
beam_max = "0.950000"
beam_size = "0.000000"
scans = "1.600000"
scan_falloff = "0.650000"
shadowMask = "6.000000"
maskstr = "1.000000"
maskboost = "1.200000"
deconrry = "1.000000"
deconrby = "-1.000000"
post_br = "1.150000"
textures = "SamplerLUT1;SamplerLUT2;SamplerLUT3;SamplerLUT4"
SamplerLUT1 = "shaders_slang/crt/shaders/guest/advanced/lut/trinitron-lut.png"
SamplerLUT1_linear = "true"
SamplerLUT1_wrap_mode = "clamp_to_border"
SamplerLUT1_mipmap = "false"
SamplerLUT2 = "shaders_slang/crt/shaders/guest/advanced/lut/inv-trinitron-lut.png"
SamplerLUT2_linear = "true"
SamplerLUT2_wrap_mode = "clamp_to_border"
SamplerLUT2_mipmap = "false"
SamplerLUT3 = "shaders_slang/crt/shaders/guest/advanced/lut/nec-lut.png"
SamplerLUT3_linear = "true"
SamplerLUT3_wrap_mode = "clamp_to_border"
SamplerLUT3_mipmap = "false"
SamplerLUT4 = "shaders_slang/crt/shaders/guest/advanced/lut/ntsc-lut.png"
SamplerLUT4_linear = "true"
SamplerLUT4_wrap_mode = "clamp_to_border"
SamplerLUT4_mipmap = "false"

It’ll probably look better if you turn the “Scanline Falloff” setting all the way down.

Yes, my bad, it was 52.60.

Anyway, for me internal resolution at 1,50 works, at least on SEGA Genesis.

And using your preset or this trick on consoles which uses phase 2 NTSC is the perfect solution, with guest’s NTSC they look way to desaturated and blurry, and there’s very little you can do about it. Which is not guest’s fault, composite signal, at least on Genesis, was terrible.

1 Like

Yup, at first that was a concern of mine when I ditched the ntsc adaptive shader settings from guest’s ntsc shader because even though phase 2 looked washed out at least it chose the accurate ntsc phase that the core you’re using automatically. But now I just love how hd looks even without the automatic ntsc phase switching and yes that trick definitely is a good work around.

I like how the composite presets came out in general, I think I found the right balance of being just blurry enough to get all the dithering effects but also just sharp enough as well where you’re not straining your eyes looking at an extra blurry image.

2 Likes

Ok, so I tried the first thing with disabling the composite setting and it worked. However the dithering effect in SOR2 kinda reappeared. I also tried the other settings you said, but I guess I will try and change some settings myself.

1 Like

Yeah there’s only so many ways you can tweak it, truth is I designed the composite presets with the mame ntsc shader strictly for that rainbow effect since that’s the only shader that does it accurately.

Speaking of presets I might put out an update later, it’s small all I did was raise the subtractive sharpness setting on the composite presets only, I like how it sharpens and cleans up the edges on pixels while still keeping the overall image blurry so that you still get all the blending effects. We’ll see later I guess.

1 Like

New Version Release (11/18/2022)

Changes Made

Turned up the subtractive sharpness setting in the composite presets, I like that it sharpens and cleans up the edges of pixels while still keeping the overall image blurry.

Previous settings:

How it looks now:

Best viewed in action.

Grab the new link in the usual post.

3 Likes

does anyone has this problem i just updated to the newest version i updated my slang shaders & guest shader i even deleted my shader folder & redownloaded everything

1 Like

Did you ever get to the bottom of this? At least we confirmed yesterday that it was your pc

During the last days I’ve been pretty conflicted with sharpness, so your new update comes in handy for a little talk.

I don’t have a CRT for comparison, but I think we went a little overboard about image clarity. There should be some blending even with RGB output, blending was a “native” feature of CRT TV’s, to a certain extend of course. I think subtractive sharpness best values stand between 0,60 and 0,80, as this is the parameter which best “mimics” the “softness” of the “pixels’ insides” without becoming marmelade.

I think horizontal sharpness is much more forgiving, but I wouldn’t go too high with that too. For a more accentuated blending effect I also tried a tad of downscaling, in the 0,10s, but it influences negatively the saturation too, so no good.

So actually with guest’s standard shader I’m at 0,60 for sub sharpness and 8 for horizontal sharpness. All of this because I wanted to replicate the blending of this huge wheel in SFA2, as seen on a JVC D-series (credits: CRT Pixels on Twitter).

2 Likes