Below for the graphic, audio and input logs:
login as: root
[email protected]’s password:
###########################################
Lakka - The DIY retro emulation console
###########################################
Lakka (unofficial) Version: devel-20160811142524-r21565-gc79651a
Lakka git: c79651a1d2c63bc637eaac438e74c78eaad44c42
Lakka:~ # systemctl stop retroarch
Lakka:~ # lspci -nnk | grep -A 3 VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a06] (rev 09)
Subsystem: Google, Inc. Haswell-ULT Integrated Graphics Controller [1ae0:c000]
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 09)
Lakka:~ # aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
default:CARD=PCH
HDA Intel PCH, ALC283 Analog
Default Audio Device
sysdefault:CARD=PCH
HDA Intel PCH, ALC283 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC283 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
Lakka:~ # dmesg
[ 0.000000] Linux version 4.6.3-rt8 (kivutar@gcc20) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT RT Thu Aug 4 03:23:10 CEST 2016
[ 0.000000] Command line: BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet vt.global_cursor_default=0 loglevel=2
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using ‘standard’ format.
[ 0.000000] x86/fpu: Using ‘eager’ FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6f3fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6f4000-0x00000000821fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017cdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Google Panther/Panther, BIOS MrChromebox 09/06/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x17ce00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 00D0000000 mask 7FF0000000 write-combining
[ 0.000000] 2 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7f6f4 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x03435000, 0x03435fff] PGTABLE
[ 0.000000] BRK [0x03436000, 0x03436fff] PGTABLE
[ 0.000000] BRK [0x03437000, 0x03437fff] PGTABLE
[ 0.000000] BRK [0x03438000, 0x03438fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F4230 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007F7170E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007F71B080 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI: DSDT 0x000000007F717280 003DF7 (v02 COREv4 COREBOOT 20110725 INTL 20160318)
[ 0.000000] ACPI: FACS 0x000000007F717240 000040
[ 0.000000] ACPI: FACS 0x000000007F717240 000040
[ 0.000000] ACPI: SSDT 0x000000007F71B180 000964 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007F71BAF0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007F71BB30 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007F71BB70 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007F71BBD0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x000000007F71BC10 00005C (v02 CORE SERIALIO 0000002B CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017cdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x17cdfa000-0x17cdfdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000017cdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f6f3fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017cdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017cdfffff]
[ 0.000000] On node 0 totalpages: 1033362
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8092 pages used for memmap
[ 0.000000] DMA32 zone: 517876 pages, LIFO batch:31
[ 0.000000] Normal zone: 7992 pages used for memmap
[ 0.000000] Normal zone: 511488 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x80200000-0x821fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x82200000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff88017ca00000 s95872 r8192 d31104 u1048576
[ 0.000000] pcpu-alloc: s95872 r8192 d31104 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1017193
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet vt.global_cursor_default=0 loglevel=2
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3964044K/4133448K available (11493K kernel code, 968K rwdata, 18776K rodata, 2664K init, 624K bss, 169404K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1396.884 MHz processor
[ 0.000042] Calibrating delay loop (skipped), value calculated using timer frequency… 2793.76 BogoMIPS (lpj=1396884)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20160108
[ 0.003241] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.003242]
[ 0.003947] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.005825] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006356] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006364] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.006653] CPU: Physical Processor ID: 0
[ 0.006654] CPU: Processor Core ID: 0
[ 0.006661] process: using mwait in idle threads
[ 0.006665] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.006666] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.006863] Freeing SMP alternatives memory: 40K (ffffffff8338e000 - ffffffff83398000)
[ 0.007882] smpboot: Max logical packages: 1
[ 0.007899] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.008512] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018518] TSC deadline timer enabled
[ 0.018521] smpboot: CPU0: Intel® Celeron® 2955U @ 1.40GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.018535] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.018566] … version: 3
[ 0.018567] … bit width: 48
[ 0.018568] … generic registers: 8
[ 0.018570] … value mask: 0000ffffffffffff
[ 0.018571] … max period: 0000ffffffffffff
[ 0.018573] … fixed-purpose events: 3
[ 0.018574] … event mask: 00000007000000ff
[ 0.027660] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.033638] x86: Booting SMP configuration:
[ 0.033640] … node #0, CPUs: #1
[ 0.095802] x86: Booted up 1 node, 2 CPUs
[ 0.095806] smpboot: Total of 2 processors activated (5590.90 BogoMIPS)
[ 0.097724] devtmpfs: initialized
[ 0.098175] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.098259] xor: measuring software checksum speed
[ 0.107576] prefetch64-sse: 11412.000 MB/sec
[ 0.117589] generic_sse: 10144.000 MB/sec
[ 0.117592] xor: using function: prefetch64-sse (11412.000 MB/sec)
[ 0.117602] pinctrl core: initialized pinctrl subsystem
[ 0.117812] NET: Registered protocol family 16
[ 0.121607] cpuidle: using governor ladder
[ 0.125616] cpuidle: using governor menu
[ 0.125726] ACPI: bus type PCI registered
[ 0.125807] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.125809] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.125820] PCI: Using configuration type 1 for base access
[ 0.125995] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.126003] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.150678] raid6: sse2x1 gen() 4531 MB/s
[ 0.167707] raid6: sse2x1 xor() 3541 MB/s
[ 0.184745] raid6: sse2x2 gen() 5699 MB/s
[ 0.201768] raid6: sse2x2 xor() 3888 MB/s
[ 0.218796] raid6: sse2x4 gen() 6648 MB/s
[ 0.235822] raid6: sse2x4 xor() 4720 MB/s
[ 0.235824] raid6: using algorithm sse2x4 gen() 6648 MB/s
[ 0.235825] raid6: … xor() 4720 MB/s, rmw enabled
[ 0.235827] raid6: using ssse3x2 recovery algorithm
[ 0.235864] ACPI: Added _OSI(Module Device)
[ 0.235866] ACPI: Added _OSI(Processor Device)
[ 0.235868] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.235870] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.236304] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.238713] ACPI: Interpreter enabled
[ 0.238731] ACPI: (supports S0 S3 S5)
[ 0.238733] ACPI: Using IOAPIC for interrupt routing
[ 0.238759] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.242730] ACPI: Power Resource [FNP0] (off)
[ 0.242771] ACPI: Power Resource [FNP1] (off)
[ 0.242818] ACPI: Power Resource [FNP2] (off)
[ 0.242858] ACPI: Power Resource [FNP3] (off)
[ 0.242897] ACPI: Power Resource [FNP4] (on)
[ 0.243538] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.243544] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.243592] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.243603] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.243706] PCI host bridge to bus 0000:00
[ 0.243710] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.243712] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.243715] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.243717] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.243719] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.243721] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.243723] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.243725] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.243727] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.243729] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.243731] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.243733] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.243735] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.243737] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.243738] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.243740] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.243742] pci_bus 0000:00: root bus resource [mem 0x82200001-0xefffffff window]
[ 0.243744] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.243747] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.243757] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.243900] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000
[ 0.243916] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.243925] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.243932] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.244051] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.244063] pci 0000:00:03.0: reg 0x10: [mem 0xe0710000-0xe0713fff 64bit]
[ 0.244203] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.244223] pci 0000:00:14.0: reg 0x10: [mem 0xe0700000-0xe070ffff 64bit]
[ 0.244291] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.244345] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.244397] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.244418] pci 0000:00:16.0: reg 0x10: [mem 0xe071c000-0xe071c01f 64bit]
[ 0.244496] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.244601] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.244618] pci 0000:00:1b.0: reg 0x10: [mem 0xe0714000-0xe0717fff 64bit]
[ 0.244694] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.244748] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.244802] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[ 0.244873] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.244975] pci 0000:00:1c.1: [8086:9c16] type 01 class 0x060400
[ 0.245044] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.245146] pci 0000:00:1c.2: [8086:9c18] type 01 class 0x060400
[ 0.245214] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.245327] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100
[ 0.245534] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.245549] pci 0000:00:1f.2: reg 0x10: [io 0x3060-0x3067]
[ 0.245558] pci 0000:00:1f.2: reg 0x14: [io 0x3070-0x3073]
[ 0.245566] pci 0000:00:1f.2: reg 0x18: [io 0x3068-0x306f]
[ 0.245575] pci 0000:00:1f.2: reg 0x1c: [io 0x3074-0x3077]
[ 0.245583] pci 0000:00:1f.2: reg 0x20: [io 0x3040-0x305f]
[ 0.245592] pci 0000:00:1f.2: reg 0x24: [mem 0xe0719000-0xe07197ff]
[ 0.245632] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.245723] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.245740] pci 0000:00:1f.3: reg 0x10: [mem 0xe071b000-0xe071b0ff 64bit]
[ 0.245763] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.245882] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[ 0.245913] pci 0000:00:1f.6: reg 0x10: [mem 0xe0718000-0xe0718fff 64bit]
[ 0.246157] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.246178] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.246210] pci 0000:01:00.0: reg 0x18: [mem 0xe0500000-0xe0500fff 64bit]
[ 0.246230] pci 0000:01:00.0: reg 0x20: [mem 0xe0400000-0xe0403fff 64bit pref]
[ 0.246330] pci 0000:01:00.0: supports D1 D2
[ 0.246332] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.246382] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.249839] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.249848] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.249853] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.249859] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff 64bit pref]
[ 0.249940] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
[ 0.249979] pci 0000:02:00.0: reg 0x10: [mem 0xe0600000-0xe067ffff 64bit]
[ 0.250058] pci 0000:02:00.0: reg 0x30: [mem 0xe0680000-0xe068ffff pref]
[ 0.250170] pci 0000:02:00.0: supports D1
[ 0.250172] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.250246] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.252867] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.252873] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
[ 0.252930] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.253076] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.253135] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.253189] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.253243] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.253299] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.253351] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.253403] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.253454] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.254310] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.254313] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.254319] vgaarb: loaded
[ 0.254321] vgaarb: bridge control possible 0000:00:02.0
[ 0.254393] SCSI subsystem initialized
[ 0.254440] libata version 3.00 loaded.
[ 0.254479] ACPI: bus type USB registered
[ 0.254505] usbcore: registered new interface driver usbfs
[ 0.254519] usbcore: registered new interface driver hub
[ 0.254533] usbcore: registered new device driver usb
[ 0.254583] pps_core: LinuxPPS API ver. 1 registered
[ 0.254585] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.254591] PTP clock support registered
[ 0.254681] wmi: Mapper loaded
[ 0.254701] Advanced Linux Sound Architecture Driver Initialized.
[ 0.254704] PCI: Using ACPI for IRQ routing
[ 0.256289] PCI: pci_cache_line_size set to 64 bytes
[ 0.256342] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.256344] e820: reserve RAM buffer [mem 0x7f6f4000-0x7fffffff]
[ 0.256346] e820: reserve RAM buffer [mem 0x17ce00000-0x17fffffff]
[ 0.256621] clocksource: Switched to clocksource hpet
[ 0.256791] pnp: PnP ACPI init
[ 0.256899] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.256902] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.256905] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.256907] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.256909] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.256912] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.256914] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.256917] system 00:00: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.256922] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257172] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.257176] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.257254] system 00:02: [io 0x1000-0x10fe] could not be reserved
[ 0.257258] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257286] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.257399] system 00:04: [io 0x0700-0x0707] has been reserved
[ 0.257402] system 00:04: [io 0x0710-0x0713] has been reserved
[ 0.257405] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257451] system 00:05: [io 0x0720] has been reserved
[ 0.257453] system 00:05: [io 0x0730-0x0737] has been reserved
[ 0.257457] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257549] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.257667] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257798] pnp: PnP ACPI: found 8 devices
[ 0.264445] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.264489] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.264492] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.264499] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.264503] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff 64bit pref]
[ 0.264510] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.264515] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
[ 0.264524] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.264538] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.264540] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.264543] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.264545] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.264547] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.264549] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.264551] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.264553] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.264555] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.264557] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.264559] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.264561] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.264563] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.264565] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.264567] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.264569] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.264571] pci_bus 0000:00: resource 20 [mem 0x82200001-0xefffffff window]
[ 0.264573] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.264576] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.264578] pci_bus 0000:01: resource 1 [mem 0xe0500000-0xe05fffff]
[ 0.264580] pci_bus 0000:01: resource 2 [mem 0xe0400000-0xe04fffff 64bit pref]
[ 0.264582] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
[ 0.264634] NET: Registered protocol family 2
[ 0.264825] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.265014] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[ 0.265659] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.265708] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.265823] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.265992] NET: Registered protocol family 1
[ 0.266097] RPC: Registered named UNIX socket transport module.
[ 0.266099] RPC: Registered udp transport module.
[ 0.266101] RPC: Registered tcp transport module.
[ 0.266102] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.266120] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.266416] PCI: CLS 64 bytes, default 64
[ 0.311946] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.311953] software IO TLB [mem 0x7b6f4000-0x7f6f4000] (64MB) mapped at [ffff88007b6f4000-ffff88007f6f3fff]
[ 0.312084] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.312086] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.312087] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.312089] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.312090] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.312381] Scanning for low memory corruption every 60 seconds
[ 0.312682] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.313090] workingset: timestamp_bits=38 max_order=20 bucket_order=0
[ 0.316116] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.316357] NFS: Registering the id_resolver key type
[ 0.316366] Key type id_resolver registered
[ 0.316368] Key type id_legacy registered
[ 0.316376] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
[ 0.317818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.317823] io scheduler noop registered
[ 0.317895] io scheduler cfq registered (default)
[ 0.318533] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 0.318590] aer 0000:00:1c.1:pcie02: service driver aer loaded
[ 0.318654] aer 0000:00:1c.2:pcie02: service driver aer loaded
[ 0.318695] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.318697] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.318701] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.318728] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.318730] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.318734] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.318768] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.318774] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.318801] intel_idle: MWAIT substates: 0x11142120
[ 0.318802] intel_idle: v0.4.1 model 0x45
[ 0.318959] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.319045] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.319050] ACPI: Power Button [PWRB]
[ 0.319104] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.319107] ACPI: Power Button [PWRF]
[ 0.319472] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.319587] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 0.320756] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.320759] ACPI: Thermal Zone [THRM] (38 C)
[ 0.320919] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.341605] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.342030] Linux agpgart interface v0.103
[ 0.342086] [drm] Initialized drm 1.1.0 20060810
[ 0.342109] [drm] radeon kernel modesetting enabled.
[ 0.342160] [drm] amdgpu kernel modesetting enabled.
[ 0.343027] [drm] Memory usable by graphics device = 2048M
[ 0.343030] [drm] Replacing VGA console driver
[ 0.343757] Console: switching to colour dummy device 80x25
[ 0.343944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.343946] [drm] Driver supports precise vblank timestamp query.
[ 0.344231] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.356998] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[ 0.363472] brd: module loaded
[ 0.363511] loop: module loaded
[ 0.364155] nbd: registered device at major 43
[ 0.365753] usbcore: registered new interface driver rtsx_usb
[ 0.365772] Loading iSCSI transport class v2.0-870.
[ 0.365896] iscsi: registered transport (tcp)
[ 0.365900] megasas: 06.810.09.00-rc1
[ 0.366044] ahci 0000:00:1f.2: version 3.0
[ 0.366255] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.366273] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 0.366276] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm apst
[ 0.366619] scsi host0: ahci
[ 0.366731] scsi host1: ahci
[ 0.366789] ata1: SATA max UDMA/133 abar m2048@0xe0719000 port 0xe0719100 irq 44
[ 0.366791] ata2: DUMMY
[ 0.367310] tun: Universal TUN/TAP device driver, 1.6
[ 0.367312] tun: © 1999-2004 Max Krasnyansky <[email protected]>
[ 0.367395] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
[ 0.367426] Atheros® L2 Ethernet Driver - version 2.2.3
[ 0.367428] Copyright © 2007 Atheros Corporation.
[ 0.367530] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 0.367588] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 0.367623] e100: Intel® PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.367625] e100: Copyright© 1999-2006 Intel Corporation
[ 0.367662] e1000: Intel® PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.367663] e1000: Copyright © 1999-2006 Intel Corporation.
[ 0.367684] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
[ 0.367685] e1000e: Copyright© 1999 - 2015 Intel Corporation.
[ 0.367706] igb: Intel® Gigabit Ethernet Network Driver - version 5.3.0-k
[ 0.367708] igb: Copyright © 2007-2014 Intel Corporation.
[ 0.367728] ixgbe: Intel® 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[ 0.367729] ixgbe: Copyright © 1999-2015 Intel Corporation.
[ 0.367778] ixgb: Intel® PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 0.367779] ixgb: Copyright © 1999-2008 Intel Corporation.
[ 0.367798] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 0.367837] sky2: driver version 1.30
[ 0.367920] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.371529] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90000a36000, c4:54:44:79:68:3b, XID 0c000800 IRQ 45
[ 0.371533] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.371682] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.371687] ehci-pci: EHCI PCI platform driver
[ 0.371704] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.371712] ohci-pci: OHCI PCI platform driver
[ 0.371728] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.371916] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.371926] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.373023] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 0.373028] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.373405] hub 1-0:1.0: USB hub found
[ 0.373418] hub 1-0:1.0: 8 ports detected
[ 0.373770] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.373776] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.374006] hub 2-0:1.0: USB hub found
[ 0.374014] hub 2-0:1.0: 4 ports detected
[ 0.374240] usbcore: registered new interface driver uas
[ 0.374266] usbcore: registered new interface driver usb-storage
[ 0.374303] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.479311] fbcon: inteldrmfb (fb0) is primary device
[ 0.668785] Console: switching to colour frame buffer device 170x48
[ 0.679160] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.679299] ata1.00: ATA-10: SB M2 SSD, S9FM02.8, max UDMA/133
[ 0.679301] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.679477] ata1.00: configured for UDMA/133
[ 0.742584] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 0.789871] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 0.794726] scsi 0:0:0:0: Direct-Access ATA SB M2 SSD 02.8 PQ: 0 ANSI: 5
[ 0.802785] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.802855] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 0.802896] sd 0:0:0:0: [sda] Write Protect is off
[ 0.802898] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.802910] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 0.803194] sda: sda1 sda2
[ 0.803419] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.085554] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 1.266538] usb 1-4: string descriptor 0 read error: -22
[ 1.313567] tsc: Refined TSC clocksource calibration: 1396.766 MHz
[ 1.313572] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1422315cd49, max_idle_ns: 440795270477 ns
[ 1.417100] i8042: No controller found
[ 1.417262] mousedev: PS/2 mouse device common for all mice
[ 1.417605] rtc_cmos 00:03: RTC can wake from S4
[ 1.417753] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.417816] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.417832] i2c /dev entries driver
[ 1.418270] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.419556] Intel P-state driver initializing.
[ 1.439716] sdhci: Secure Digital Host Controller Interface driver
[ 1.439721] sdhci: Copyright© Pierre Ossman
[ 1.439785] No iBFT detected.
[ 1.439819] hidraw: raw HID events driver © Jiri Kosina
[ 1.458027] input: Sony PLAYSTATION®3 Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:054C:0268.0001/input/input3
[ 1.458517] sony 0003:054C:0268.0001: input,hiddev0,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION®3 Controller] on usb-0000:00:14.0-2/input0
[ 1.513700] usbcore: registered new interface driver usbhid
[ 1.513704] usbhid: USB HID core driver
[ 1.514334] NET: Registered protocol family 10
[ 1.514687] NET: Registered protocol family 17
[ 1.514720] Key type dns_resolver registered
[ 1.514854] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 1.514860] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 1.515009] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[ 1.515930] Btrfs loaded
[ 1.516216] console [netcon0] enabled
[ 1.516218] netconsole: network logging started
[ 1.516259] rtc_cmos 00:03: setting system clock to 2016-09-29 06:08:23 UTC (1475129303)
[ 1.516344] ALSA device list:
[ 1.516345] No soundcards found.
[ 1.518769] Freeing unused kernel memory: 2664K (ffffffff830f4000 - ffffffff8338e000)
[ 1.518772] Write protecting the kernel read-only data: 32768k
[ 1.519467] Freeing unused kernel memory: 776K (ffff880001b3e000 - ffff880001c00000)
[ 1.525283] Freeing unused kernel memory: 1704K (ffff880002e56000 - ffff880003000000)
[ 1.596041] EXT4-fs (sda1): couldn’t mount as ext3 due to feature incompatibilities
[ 1.596242] EXT4-fs (sda1): couldn’t mount as ext2 due to feature incompatibilities
[ 1.597416] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.610367] EXT4-fs (sda2): couldn’t mount as ext3 due to feature incompatibilities
[ 1.610550] EXT4-fs (sda2): couldn’t mount as ext2 due to feature incompatibilities
[ 1.621664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.321647] clocksource: Switched to clocksource tsc
[ 3.027262] random: systemd urandom read with 38 bits of entropy available
[ 3.033584] systemd[1]: systemd 228 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 3.033789] systemd[1]: Detected architecture x86-64.
[ 3.033906] systemd[1]: Running with unpopulated /etc.
[ 3.034095] systemd[1]: Set hostname to <Lakka>.
[ 3.034281] systemd[1]: Initializing machine ID from random generator.
[ 3.050648] systemd[1]: Populated /etc with preset unit settings.
[ 3.065185] systemd[1]: storage.mount: Unit is bound to inactive unit dev-sda2.device. Stopping, too.
[ 3.069495] systemd[1]: Listening on udev Kernel Socket.
[ 3.069561] systemd[1]: Reached target Swap.
[ 3.069888] systemd[1]: Created slice User and Session Slice.
[ 3.069949] systemd[1]: Listening on Journal Socket.
[ 3.070015] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.070053] systemd[1]: Listening on udev Control Socket.
[ 3.070097] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.070108] systemd[1]: Reached target Paths.
[ 3.070142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.070167] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.080999] systemd[1]: Created slice System Slice.
[ 3.085589] systemd[1]: Starting Remount Root and Kernel File Systems…
[ 3.086595] systemd[1]: Starting Show Version…
[ 3.087174] systemd[1]: Mounting Variable Directory…
[ 3.087746] systemd[1]: Mounting Debug File System…
[ 3.088210] systemd[1]: Mounting POSIX Message Queue File System…
[ 3.088815] systemd[1]: Starting Create list of required static device nodes for the current kernel…
[ 3.088834] systemd[1]: Reached target Slices.
[ 3.090599] systemd[1]: Starting Apply Kernel Variables…
[ 3.092430] systemd[1]: Mounting Temporary Directory…
[ 3.092922] systemd[1]: Starting Setup machine-id…
[ 3.093635] systemd[1]: Starting Set ondemand threshold…
[ 3.094807] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.096087] systemd[1]: Starting udev Coldplug all Devices…
[ 3.097936] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.098604] systemd[1]: Starting Create Static Device Nodes in /dev…
[ 3.123811] systemd[1]: Started Apply Kernel Variables.
[ 3.125790] systemd[1]: Mounted Debug File System.
[ 3.125833] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.125854] systemd[1]: Mounted Temporary Directory.
[ 3.127142] systemd[1]: Mounted Variable Directory.
[ 3.127470] systemd[1]: Started Show Version.
[ 3.128135] systemd[1]: Started Set ondemand threshold.
[ 3.136536] systemd[1]: Starting Setup Timezone data…
[ 3.138665] systemd[1]: Started Setup machine-id.
[ 3.139204] systemd[1]: Started Create Static Device Nodes in /dev.
[ 3.153357] systemd[1]: Started Setup Timezone data.
[ 3.181314] systemd[1]: Reached target Local File Systems (Pre).
[ 3.181352] systemd[1]: Reached target Local File Systems.
[ 3.182559] systemd[1]: Starting Journal Service…
[ 3.221068] systemd[1]: Started Journal Service.
[ 3.235946] systemd-journald[217]: Received request to flush runtime journal from PID 1
[ 3.685020] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff81cdbd70)
[ 3.760622] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4
[ 3.760699] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
[ 3.760776] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 3.762883] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 3.762888] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.762891] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.762893] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.762895] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.762898] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 3.821862] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 3.826990] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 3.828308] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.846060] Bluetooth: Core ver 2.21
[ 3.846080] NET: Registered protocol family 31
[ 3.846082] Bluetooth: HCI device and connection manager initialized
[ 3.846087] Bluetooth: HCI socket layer initialized
[ 3.846090] Bluetooth: L2CAP socket layer initialized
[ 3.846099] Bluetooth: SCO socket layer initialized
[ 3.894470] usb 1-4: USB disconnect, device number 3
[ 3.926321] usbcore: registered new interface driver ath3k
[ 3.936889] usbcore: registered new interface driver btusb
[ 3.979590] intel_rapl: Found RAPL domain package
[ 3.979597] intel_rapl: Found RAPL domain core
[ 3.979600] intel_rapl: Found RAPL domain uncore
[ 3.979603] intel_rapl: Found RAPL domain dram
[ 4.036710] ath: phy0: ASPM enabled: 0x43
[ 4.036716] ath: EEPROM regdomain: 0x60
[ 4.036718] ath: EEPROM indicates we should expect a direct regpair map
[ 4.036720] ath: Country alpha2 being used: 00
[ 4.036721] ath: Regpair used: 0x60
[ 4.151984] r8169 0000:01:00.0 eth0: link down
[ 4.151986] r8169 0000:01:00.0 eth0: link down
[ 4.152065] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.154132] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’
[ 4.166748] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001700000, irq=19
[ 4.191317] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 4.365282] usb 1-4: string descriptor 0 read error: -22
[ 6.949552] r8169 0000:01:00.0 eth0: link up
[ 6.949567] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.861882] random: nonblocking pool is initialized
[ 14.202194] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[11632.607185] perf: interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[13019.613367] NOHZ: local_softirq_pending 80
[15325.945599] perf: interrupt took too long (3217 > 3143), lowering kernel.perf_event_max_sample_rate to 62000
[21281.596486] perf: interrupt took too long (4064 > 4021), lowering kernel.perf_event_max_sample_rate to 49000
[21594.141296] NOHZ: local_softirq_pending 80
[22540.804522] NOHZ: local_softirq_pending 80
[22669.949508] NOHZ: local_softirq_pending 80
[24290.640588] NOHZ: local_softirq_pending 80
[24964.393590] NOHZ: local_softirq_pending 80
[28281.317042] NOHZ: local_softirq_pending 80
[30180.323855] NOHZ: local_softirq_pending 80
[30751.099672] perf: interrupt took too long (5111 > 5080), lowering kernel.perf_event_max_sample_rate to 39000
[33387.298101] NOHZ: local_softirq_pending 80
[37924.837605] NOHZ: local_softirq_pending 80
Lakka:~ #
