Audio issue using HDMI

Libretro Lakka
#1

I just built a cheap PC to install Lakka on and I’m having a curious issue with the sound. Here’s my situation:

i3-7100 processor MSI Radeon HD 7790 graphics card

When I attempt to use the audio from the HDMI slot on the graphics card, I get strange garbled audio that crackles and buzzes. You can hear the sound effects and music, but it’s covered up by these weird sounds.

I have tried it on a Bravia 4K TV that runs @ 120hz and a regulard 1080p HD TV with the same results. I have tried just about every combo of video and audio settings possible.

When I plug headphones or computer speakers into the regular integrated audio, everything is fine.

Anyone have any ideas for me? Thanks.

#2

Is it possible to provide some log especially lakka system, dmesg, audio log.

Also did you try to make a test with another hdmi cable ?

Thank you.

#4

Thanks for the reply, gouchi.

What’s the most convenient way to post a log file so it’s easy for you to read?

#5

[ 0.000000] microcode: microcode updated early to revision 0x5e, date = 2017- 04-06
[ 0.000000] Linux version 4.11.12-rt14 (kivutar@Server01) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT RT Sat Nov 18 21:12:49 CST 2017
[ 0.000000] Command line: BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Sto rage quiet vt.global_cursor_default=0 loglevel=2
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi sters'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fa45fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fa46000-0x000000005fa46fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005fa47000-0x000000005fa47fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005fa48000-0x000000008ecd2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ecd3000-0x000000008f128fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f129000-0x000000008f1d0fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008f1d1000-0x000000008f577fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f578000-0x000000008fbfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008fc00000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x5e3ca018-0x5e3da057] usable ==> usable
[ 0.000000] e820: update [mem 0x5e3bb018-0x5e3c9057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] u sable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] r eserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] u sable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] r eserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000005e3bb017] u sable
[ 0.000000] reserve setup_data: [mem 0x000000005e3bb018-0x000000005e3c9057] u sable
[ 0.000000] reserve setup_data: [mem 0x000000005e3c9058-0x000000005e3ca017] u sable
[ 0.000000] reserve setup_data: [mem 0x000000005e3ca018-0x000000005e3da057] u sable
[ 0.000000] reserve setup_data: [mem 0x000000005e3da058-0x000000005fa45fff] u sable
[ 0.000000] reserve setup_data: [mem 0x000000005fa46000-0x000000005fa46fff] A CPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000005fa47000-0x000000005fa47fff] r eserved
[ 0.000000] reserve setup_data: [mem 0x000000005fa48000-0x000000008ecd2fff] u sable
[ 0.000000] reserve setup_data: [mem 0x000000008ecd3000-0x000000008f128fff] r eserved
[ 0.000000] reserve setup_data: [mem 0x000000008f129000-0x000000008f1d0fff] u sable
[ 0.000000] reserve setup_data: [mem 0x000000008f1d1000-0x000000008f577fff] A CPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000008f578000-0x000000008fbfefff] r eserved
[ 0.000000] reserve setup_data: [mem 0x000000008fbff000-0x000000008fbfffff] u sable
[ 0.000000] reserve setup_data: [mem 0x000000008fc00000-0x000000008fffffff] r eserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] r eserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] r eserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] r eserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] r eserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] r eserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] r eserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000016effffff] u sable
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x8f1d1000 ACPI=0x8f1d1000 SMBIOS=0x8fa65000 MP S=0xfc9f0 ESRT=0x8ad70818 MEMATTR=0x89ba2018
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: MSI MS-7A74/B250M PRO-VD (MS-7A74), BIOS 1.40 04/06/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x16f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcc40-0x000fcc4f] mapped at [ffff 8800000fcc40]
[ 0.000000] esrt: Reserving ESRT space from 0x000000008ad70818 to 0x000000008 ad70850.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x03cf3000, 0x03cf3fff] PGTABLE
[ 0.000000] BRK [0x03cf4000, 0x03cf4fff] PGTABLE
[ 0.000000] BRK [0x03cf5000, 0x03cf5fff] PGTABLE
[ 0.000000] BRK [0x03cf6000, 0x03cf6fff] PGTABLE
[ 0.000000] BRK [0x03cf7000, 0x03cf7fff] PGTABLE
[ 0.000000] BRK [0x03cf8000, 0x03cf8fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000008F1D1000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000008F1D10A8 0000D4 (v01 ALASKA A M I 0107200 9 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008F1F81C0 000114 (v06 ALASKA A M I 0107200 9 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000008F1D1218 026FA5 (v02 ALASKA A M I 0107200 9 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000008F577D80 000040
[ 0.000000] ACPI: APIC 0x000000008F1F82D8 000084 (v03 ALASKA A M I 0107200 9 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008F1F8360 000044 (v01 ALASKA A M I 0107200 9 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000008F1F83A8 00009C (v01 ALASKA A M I 0107200 9 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000008F1F8448 00003C (v01 ALASKA A M I 0107200 9 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000008F1F8488 0003A3 (v01 SataRe SataTabl 0000100 0 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008F1F8830 003176 (v02 SaSsdt SaSsdt 0000300 0 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008F1FB9A8 0025A5 (v02 PegSsd PegSsdt 0000100 0 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000008F1FDF50 000038 (v01 INTEL KBL 0000000 1 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000008F1FDF88 000DE5 (v02 INTEL Ther_Rvp 0000100 0 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008F1FED70 000A29 (v02 INTEL xh_rvp08 0000000 0 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000008F1FF7A0 000042 (v01 ALASKA A M I 0000000 2 01000013)
[ 0.000000] ACPI: SSDT 0x000000008F1FF7E8 000EDE (v02 CpuRef CpuSsdt 0000300 0 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000008F2006C8 000094 (v01 INTEL KBL 0000000 0 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000008F200760 000141 (v02 INTEL HdaDsp 0000000 0 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008F2008A8 00029F (v02 INTEL sensrhub 0000000 0 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008F200B48 003002 (v02 INTEL PtidDevc 0000100 0 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008F203B50 000517 (v02 INTEL TbtTypeC 0000000 0 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000008F204068 000034 (v01 INTEL 0000000 2 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000008F2040A0 000054 (v00 INTEL 0000000 2 MSFT 0000005F)
[ 0.000000] ACPI: BGRT 0x000000008F2040F8 000038 (v01 ALASKA A M I 0107200 9 AMI 00010013)
[ 0.000000] ACPI: WSMT 0x000000008F204130 000028 (v01 ALASKA A M I 0107200 9 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x16eff8000-0x16effbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000016effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000005fa45fff]
[ 0.000000] node 0: [mem 0x000000005fa48000-0x000000008ecd2fff]
[ 0.000000] node 0: [mem 0x000000008f129000-0x000000008f1d0fff]
[ 0.000000] node 0: [mem 0x000000008fbff000-0x000000008fbfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000016effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000016effffff]
[ 0.000000] On node 0 totalpages: 1039639
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9078 pages used for memmap
[ 0.000000] DMA32 zone: 580986 pages, LIFO batch:31
[ 0.000000] Normal zone: 7104 pages used for memmap
[ 0.000000] Normal zone: 454656 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff ffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff88016ec00000 s107904 r8192 d31 360 u524288
[ 0.000000] pcpu-alloc: s107904 r8192 d31360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag es: 1023367
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosusp end=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage quiet vt.global_ cursor_default=0 loglevel=2
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3912728K/4158556K available (12819K kernel code, 1039K rw data, 25288K rodata, 3468K init, 512K bss, 245828K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Detected 3900.000 MHz processor
[ 0.001000] Calibrating delay loop (skipped), value calculated using timer fr equency.. 7824.00 BogoMIPS (lpj=3912000)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] ACPI: Core revision 20170119
[ 0.020172] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.021069] Dentry cache hash table entries: 524288 (order: 11, 8388608 bytes )
[ 0.022474] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.022810] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.022813] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.022930] CPU: Physical Processor ID: 0
[ 0.022931] CPU: Processor Core ID: 0
[ 0.022934] process: using mwait in idle threads
[ 0.022936] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.022936] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.022975] Freeing SMP alternatives memory: 40K
[ 0.024794] smpboot: Max logical packages: 2
[ 0.028770] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.038801] TSC deadline timer enabled
[ 0.038805] smpboot: CPU0: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz (family: 0 x6, model: 0x9e, stepping: 0x9)
[ 0.042006] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full -width counters, Intel PMU driver.
[ 0.042024] ... version: 4
[ 0.042024] ... bit width: 48
[ 0.042024] ... generic registers: 4
[ 0.042025] ... value mask: 0000ffffffffffff
[ 0.042025] ... max period: 00007fffffffffff
[ 0.042026] ... fixed-purpose events: 3
[ 0.042026] ... event mask: 000000070000000f
[ 0.054059] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM U counter.
[ 0.056001] smp: Bringing up secondary CPUs ...
[ 0.067005] x86: Booting SMP configuration:
[ 0.067005] .... node #0, CPUs: #1 #2 #3
[ 0.272021] smp: Brought up 1 node, 4 CPUs
[ 0.272021] smpboot: Total of 4 processors activated (31311.18 BogoMIPS)
[ 0.273054] sched_clock: Marking stable (273000000, 0)->(274163279, -1163279)
[ 0.273180] devtmpfs: initialized
[ 0.273374] PM: Registering ACPI NVS region [mem 0x5fa46000-0x5fa46fff] (4096 bytes)
[ 0.273376] PM: Registering ACPI NVS region [mem 0x8f1d1000-0x8f577fff] (3829 760 bytes)
[ 0.273432] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 1911260446275000 ns
[ 0.273442] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.273470] xor: automatically using best checksumming function avx
[ 0.273473] pinctrl core: initialized pinctrl subsystem
[ 0.273560] NET: Registered protocol family 16
[ 0.273713] cpuidle: using governor ladder
[ 0.276015] cpuidle: using governor menu
[ 0.276017] PCCT header not found.
[ 0.276090] ACPI FADT declares the system doesn't support PCIe ASPM, so disab le it
[ 0.276091] ACPI: bus type PCI registered
[ 0.276136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef ffffff] (base 0xe0000000)
[ 0.276137] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.276142] PCI: Using configuration type 1 for base access
[ 0.295029] raid6: sse2x1 gen() 14003 MB/s
[ 0.312044] raid6: sse2x1 xor() 10603 MB/s
[ 0.329055] raid6: sse2x2 gen() 17179 MB/s
[ 0.346066] raid6: sse2x2 xor() 12048 MB/s
[ 0.363084] raid6: sse2x4 gen() 19699 MB/s
[ 0.380093] raid6: sse2x4 xor() 13962 MB/s
[ 0.397104] raid6: avx2x1 gen() 28121 MB/s
[ 0.414115] raid6: avx2x1 xor() 20562 MB/s
[ 0.431130] raid6: avx2x2 gen() 31812 MB/s
[ 0.448143] raid6: avx2x2 xor() 22601 MB/s
[ 0.465157] raid6: avx2x4 gen() 35773 MB/s
[ 0.482172] raid6: avx2x4 xor() 25820 MB/s
[ 0.482173] raid6: using algorithm avx2x4 gen() 35773 MB/s
[ 0.482173] raid6: .... xor() 25820 MB/s, rmw enabled
[ 0.482174] raid6: using avx2x2 recovery algorithm
[ 0.482198] ACPI: Added _OSI(Module Device)
[ 0.482199] ACPI: Added _OSI(Processor Device)
[ 0.482199] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.482199] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.483230] ACPI: Executed 38 blocks of module-level executable AML code
[ 0.492911] ACPI: Dynamic OEM Table Load:
[ 0.492915] ACPI: SSDT 0xFFFF88016972F000 00079B (v02 PmRef Cpu0Ist 0000300 0 INTL 20160422)
[ 0.493004] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.493056] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.493907] ACPI: Dynamic OEM Table Load:
[ 0.493910] ACPI: SSDT 0xFFFF880169318800 0003FF (v02 PmRef Cpu0Cst 0000300 1 INTL 20160422)
[ 0.493990] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.494115] ACPI: Dynamic OEM Table Load:
[ 0.494117] ACPI: SSDT 0xFFFF880169289800 000115 (v02 PmRef Cpu0Hwp 0000300 0 INTL 20160422)
[ 0.494189] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.494262] ACPI: Dynamic OEM Table Load:
[ 0.494264] ACPI: SSDT 0xFFFF880169289A00 0001A4 (v02 PmRef HwpLvt 0000300 0 INTL 20160422)
[ 0.494329] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.494593] ACPI: Dynamic OEM Table Load:
[ 0.494596] ACPI: SSDT 0xFFFF88016972F800 00065C (v02 PmRef ApIst 0000300 0 INTL 20160422)
[ 0.494791] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.494907] ACPI: Dynamic OEM Table Load:
[ 0.494909] ACPI: SSDT 0xFFFF880169289C00 000197 (v02 PmRef ApHwp 0000300 0 INTL 20160422)
[ 0.494989] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.495108] ACPI: Dynamic OEM Table Load:
[ 0.495110] ACPI: SSDT 0xFFFF880169289E00 00018A (v02 PmRef ApCst 0000300 0 INTL 20160422)
[ 0.495195] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.496745] ACPI: Interpreter enabled
[ 0.496765] ACPI: (supports S0 S3 S5)
[ 0.496766] ACPI: Using IOAPIC for interrupt routing
[ 0.496791] PCI: Using host bridge windows from ACPI; if necessary, use "pci= nocrs" and report a bug
[ 0.498950] ACPI: Power Resource [PG00] (on)
[ 0.499191] ACPI: Power Resource [PG01] (on)
[ 0.499436] ACPI: Power Resource [PG02] (on)
[ 0.501046] ACPI: Power Resource [WRST] (on)
[ 0.501289] ACPI: Power Resource [WRST] (on)
[ 0.501524] ACPI: Power Resource [WRST] (on)
[ 0.501759] ACPI: Power Resource [WRST] (on)
[ 0.501992] ACPI: Power Resource [WRST] (on)
[ 0.502235] ACPI: Power Resource [WRST] (on)
[ 0.502478] ACPI: Power Resource [WRST] (on)
[ 0.502721] ACPI: Power Resource [WRST] (on)
[ 0.502955] ACPI: Power Resource [WRST] (on)
[ 0.503187] ACPI: Power Resource [WRST] (on)
[ 0.503428] ACPI: Power Resource [WRST] (on)
[ 0.503664] ACPI: Power Resource [WRST] (on)
[ 0.503898] ACPI: Power Resource [WRST] (on)
[ 0.504131] ACPI: Power Resource [WRST] (on)
[ 0.504370] ACPI: Power Resource [WRST] (on)
[ 0.504602] ACPI: Power Resource [WRST] (on)
[ 0.504835] ACPI: Power Resource [WRST] (on)
[ 0.505784] ACPI: Power Resource [WRST] (on)
[ 0.506017] ACPI: Power Resource [WRST] (on)
[ 0.506256] ACPI: Power Resource [WRST] (on)
[ 0.515055] ACPI: Power Resource [FN00] (off)
[ 0.515116] ACPI: Power Resource [FN01] (off)
[ 0.515177] ACPI: Power Resource [FN02] (off)
[ 0.515243] ACPI: Power Resource [FN03] (off)
[ 0.515303] ACPI: Power Resource [FN04] (off)
[ 0.516159] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.516162] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S egments MSI]
[ 0.516300] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
[ 0.516426] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[ 0.516427] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS c onfiguration
[ 0.516674] PCI host bridge to bus 0000:00
[ 0.516675] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.516676] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.516676] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win dow]
[ 0.516677] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff win dow]
[ 0.516677] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff win dow]
[ 0.516678] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.516683] pci 0000:00:00.0: [8086:590f] type 00 class 0x060000
[ 0.516905] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.516932] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.517034] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.517102] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.517108] pci 0000:00:08.0: reg 0x10: [mem 0xdff1b000-0xdff1bfff 64bit]
[ 0.517238] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[ 0.517253] pci 0000:00:14.0: reg 0x10: [mem 0xdff00000-0xdff0ffff 64bit]
[ 0.517306] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.517437] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.517465] pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
[ 0.517479] pci 0000:00:14.2: reg 0x10: [mem 0xdff1a000-0xdff1afff 64bit]
[ 0.517626] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[ 0.517641] pci 0000:00:16.0: reg 0x10: [mem 0xdff19000-0xdff19fff 64bit]
[ 0.517699] pci 0000:00:16.0: PME# supported from D3hot
[ 0.517829] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[ 0.517840] pci 0000:00:17.0: reg 0x10: [mem 0xdff14000-0xdff15fff]
[ 0.517845] pci 0000:00:17.0: reg 0x14: [mem 0xdff18000-0xdff180ff]
[ 0.517851] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.517856] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.517862] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.517867] pci 0000:00:17.0: reg 0x24: [mem 0xdff17000-0xdff177ff]
[ 0.517898] pci 0000:00:17.0: PME# supported from D3hot
[ 0.518015] pci 0000:00:1c.0: [8086:a295] type 01 class 0x060400
[ 0.518061] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.518161] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.518202] pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
[ 0.518253] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.518353] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.518386] pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100
[ 0.518576] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[ 0.518583] pci 0000:00:1f.2: reg 0x10: [mem 0xdff10000-0xdff13fff]
[ 0.518726] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[ 0.518772] pci 0000:00:1f.4: reg 0x10: [mem 0xdff16000-0xdff160ff 64bit]
[ 0.518841] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.519040] pci 0000:01:00.0: [1002:665c] type 00 class 0x030000
[ 0.519059] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref ]
[ 0.519071] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref ]
[ 0.519079] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.519087] pci 0000:01:00.0: reg 0x24: [mem 0xdfe00000-0xdfe3ffff]
[ 0.519096] pci 0000:01:00.0: reg 0x30: [mem 0xdfe40000-0xdfe5ffff pref]
[ 0.519164] pci 0000:01:00.0: supports D1 D2
[ 0.519164] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.519191] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.519223] pci 0000:01:00.1: [1002:0002] type 00 class 0x040300
[ 0.519245] pci 0000:01:00.1: reg 0x10: [mem 0xdfe60000-0xdfe63fff 64bit]
[ 0.519339] pci 0000:01:00.1: supports D1 D2
[ 0.522246] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.522248] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.522249] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.522251] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd07fffff 64bi t pref]
[ 0.522292] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.522309] pci 0000:02:00.0: reg 0x10: [mem 0xdfd00000-0xdfd1ffff 64bit]
[ 0.522339] pci 0000:02:00.0: reg 0x30: [mem 0xdfd20000-0xdfd2ffff pref]
[ 0.522398] pci 0000:02:00.0: supports D1
[ 0.522399] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.522469] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.522500] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.522503] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.522543] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.522558] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.522580] pci 0000:03:00.0: reg 0x18: [mem 0xdfc04000-0xdfc04fff 64bit]
[ 0.522593] pci 0000:03:00.0: reg 0x20: [mem 0xdfc00000-0xdfc03fff 64bit]
[ 0.522670] pci 0000:03:00.0: supports D1 D2
[ 0.522671] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.522733] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.522770] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.522771] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.522773] pci 0000:00:1c.6: bridge window [mem 0xdfc00000-0xdfcfffff]

#6

[ 0.524082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.524118] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.524153] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.524194] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.524229] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.524263] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.524297] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.524332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.524643] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.524734] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.524735] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=i o+mem,locks=none
[ 0.524737] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.524737] vgaarb: loaded
[ 0.524767] SCSI subsystem initialized
[ 0.524789] libata version 3.00 loaded.
[ 0.524804] ACPI: bus type USB registered
[ 0.524817] usbcore: registered new interface driver usbfs
[ 0.524823] usbcore: registered new interface driver hub
[ 0.524832] usbcore: registered new device driver usb
[ 0.524849] pps_core: LinuxPPS API ver. 1 registered
[ 0.524849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <[email protected]>
[ 0.524850] PTP clock support registered
[ 0.524871] Registered efivars operations
[ 0.545251] wmi: Mapper loaded
[ 0.545260] Advanced Linux Sound Architecture Driver Initialized.
[ 0.545261] PCI: Using ACPI for IRQ routing
[ 0.573279] PCI: pci_cache_line_size set to 64 bytes
[ 0.573318] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.573319] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.573320] e820: reserve RAM buffer [mem 0x5e3bb018-0x5fffffff]
[ 0.573320] e820: reserve RAM buffer [mem 0x5e3ca018-0x5fffffff]
[ 0.573321] e820: reserve RAM buffer [mem 0x5fa46000-0x5fffffff]
[ 0.573322] e820: reserve RAM buffer [mem 0x8ecd3000-0x8fffffff]
[ 0.573322] e820: reserve RAM buffer [mem 0x8f1d1000-0x8fffffff]
[ 0.573323] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
[ 0.573324] e820: reserve RAM buffer [mem 0x16f000000-0x16fffffff]
[ 0.573478] clocksource: Switched to clocksource hpet
[ 0.573521] FS-Cache: Loaded
[ 0.573539] pnp: PnP ACPI init
[ 0.573727] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.573728] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.573728] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.573729] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.573731] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.573757] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active )
[ 0.573785] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active )
[ 0.574089] pnp 00:03: [dma 0 disabled]
[ 0.574115] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.574216] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.574217] system 00:04: [io 0xffff] has been reserved
[ 0.574218] system 00:04: [io 0xffff] has been reserved
[ 0.574219] system 00:04: [io 0xffff] has been reserved
[ 0.574220] system 00:04: [io 0x1800-0x18fe] has been reserved
[ 0.574221] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.574223] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.574289] system 00:05: [io 0x0800-0x087f] has been reserved
[ 0.574291] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.574304] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.574338] system 00:07: [io 0x1854-0x1857] has been reserved
[ 0.574340] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (act ive)
[ 0.574504] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.574505] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.574506] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.574507] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.574508] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.574509] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.574510] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.574511] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.574512] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.574513] system 00:08: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.574515] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.574552] system 00:09: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.574553] system 00:09: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.574553] system 00:09: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.574554] system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.574555] system 00:09: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.574556] system 00:09: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.574558] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.574748] system 00:0a: [io 0xff00-0xfffe] has been reserved
[ 0.574750] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.575515] system 00:0b: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.575516] system 00:0b: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.575517] system 00:0b: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.575519] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.576037] pnp: PnP ACPI: found 12 devices
[ 0.583444] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id le_ns: 2085701024 ns
[ 0.583463] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.583464] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.583465] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.583467] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd07fffff 64bi t pref]
[ 0.583469] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.583471] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.583475] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.583476] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.583501] pci 0000:00:1c.6: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.583506] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.583506] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.583507] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.583507] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[ 0.583508] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.583508] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.583509] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.583510] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd07fffff 64bit pref ]
[ 0.583510] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.583511] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.583511] pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.583594] NET: Registered protocol family 2
[ 0.583678] TCP established hash table entries: 32768 (order: 6, 262144 bytes )
[ 0.583800] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes)
[ 0.584067] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.584099] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.584151] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.584223] NET: Registered protocol family 1
[ 0.584336] RPC: Registered named UNIX socket transport module.
[ 0.584337] RPC: Registered udp transport module.
[ 0.584337] RPC: Registered tcp transport module.
[ 0.584338] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.585142] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c00 00-0x000dffff]
[ 0.585150] PCI: CLS 64 bytes, default 64
[ 0.608464] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.608466] software IO TLB [mem 0x85ba2000-0x89ba2000] (64MB) mapped at [fff f880085ba2000-ffff880089ba1fff]
[ 0.608620] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms o vfl timer
[ 0.608621] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.608621] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.608622] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.608622] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.608622] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 0.608789] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70c74780 4da, max_idle_ns: 881591211608 ns
[ 0.609171] Scanning for low memory corruption every 60 seconds
[ 0.609537] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.610951] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.610987] FS-Cache: Netfs 'nfs' registered for caching
[ 0.611095] NFS: Registering the id_resolver key type
[ 0.611100] Key type id_resolver registered
[ 0.611101] Key type id_legacy registered
[ 0.611103] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.611182] FS-Cache: Netfs 'cifs' registered for caching
[ 0.613526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 50)
[ 0.613527] io scheduler noop registered
[ 0.613561] io scheduler cfq registered (default)
[ 0.613562] io scheduler mq-deadline registered
[ 0.614187] efifb: probing for efifb
[ 0.614197] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[ 0.614198] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.614198] efifb: scrolling: redraw
[ 0.614199] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.615342] Console: switching to colour frame buffer device 128x48
[ 0.616406] fb0: EFI VGA frame buffer device
[ 0.616411] intel_idle: MWAIT substates: 0x142120
[ 0.616411] intel_idle: v0.4.1 model 0x9E
[ 0.616640] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.616721] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:0 0/input/input0
[ 0.616723] ACPI: Sleep Button [SLPB]
[ 0.616748] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0 0/input/input1
[ 0.616749] ACPI: Power Button [PWRB]
[ 0.616777] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp ut2
[ 0.616778] ACPI: Power Button [PWRF]
[ 0.647534] (NULL device *): hwmon_device_register() is deprecated. Please co nvert the driver to use hwmon_device_register_with_info().
[ 0.677786] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.677787] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.677886] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.677886] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.678098] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.698817] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655 0A
[ 0.719663] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.720069] Linux agpgart interface v0.103
[ 0.720101] [drm] radeon kernel modesetting enabled.
[ 0.720125] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 0.720125] fb: switching to radeondrmfb from EFI VGA
[ 0.720134] Console: switching to colour dummy device 80x25
[ 0.720449] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x665C 0x14 62:0x2930 0x00).
[ 0.720455] [drm] register mmio base: 0xDFE00000
[ 0.720455] [drm] register mmio size: 262144
[ 0.720458] [drm] doorbell mmio base: 0xD0000000
[ 0.720458] [drm] doorbell mmio size: 8388608
[ 0.720531] ATOM BIOS: 113
[ 0.720609] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003 FFFFFFF (1024M used)
[ 0.720610] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BF FFFFFF
[ 0.720612] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.720612] [drm] RAM width 128bits DDR
[ 0.720701] [TTM] Zone kernel: Available graphics memory: 1990072 kiB
[ 0.720701] [TTM] Initializing pool allocator
[ 0.720704] [TTM] Initializing DMA pool allocator
[ 0.720717] [drm] radeon: 1024M of VRAM memory ready
[ 0.720718] [drm] radeon: 2048M of GTT memory ready.
[ 0.720725] [drm] Loading bonaire Microcode
[ 0.720742] [drm] Internal thermal controller with fan control
[ 0.720760] [drm] probing gen 2 caps for device 8086:1901 = 261ad01/e
[ 0.728877] [drm] radeon: dpm initialized
[ 0.728881] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 0.731040] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 0.731044] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 0.732467] [drm] probing gen 2 caps for device 8086:1901 = 261ad01/e
[ 0.732470] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_g en2=0
[ 1.635625] clocksource: Switched to clocksource tsc
[ 2.096556] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 2.096663] radeon 0000:01:00.0: WB enabled
[ 2.096668] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x000000 0040000c00 and cpu addr 0xffff880167e41c00
[ 2.096669] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x000000 0040000c04 and cpu addr 0xffff880167e41c04
[ 2.096669] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x000000 0040000c08 and cpu addr 0xffff880167e41c08
[ 2.096670] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x000000 0040000c0c and cpu addr 0xffff880167e41c0c
[ 2.096671] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x000000 0040000c10 and cpu addr 0xffff880167e41c10
[ 2.097410] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000 0000078d30 and cpu addr 0xffffc90001438d30
[ 2.097689] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x000000 0040000c18 and cpu addr 0xffff880167e41c18
[ 2.097689] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x000000 0040000c1c and cpu addr 0xffff880167e41c1c
[ 2.097690] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.097690] [drm] Driver supports precise vblank timestamp query.
[ 2.097722] radeon 0000:01:00.0: radeon: using MSI.
[ 2.097762] [drm] radeon: irq initialized.
[ 2.100583] [drm] ring test on 0 succeeded in 3 usecs
[ 2.100667] [drm] ring test on 1 succeeded in 3 usecs
[ 2.100688] [drm] ring test on 2 succeeded in 3 usecs
[ 2.100870] [drm] ring test on 3 succeeded in 5 usecs
[ 2.100877] [drm] ring test on 4 succeeded in 4 usecs
[ 2.146955] [drm] ring test on 5 succeeded in 2 usecs
[ 2.166987] [drm] UVD initialized successfully.
[ 2.277150] [drm] ring test on 6 succeeded in 17 usecs
[ 2.277162] [drm] ring test on 7 succeeded in 3 usecs
[ 2.277162] [drm] VCE initialized successfully.
[ 2.278010] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.779538] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.779567] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.779641] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.779723] [drm] ib test on ring 4 succeeded in 0 usecs
[ 3.307630] [drm] ib test on ring 5 succeeded
[ 3.328552] [drm] ib test on ring 6 succeeded
[ 3.329312] [drm] ib test on ring 7 succeeded
[ 3.329578] [drm] Radeon Display Connectors
[ 3.329578] [drm] Connector 0:
[ 3.329578] [drm] DP-1
[ 3.329579] [drm] HPD2
[ 3.329579] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x6 53c
[ 3.329580] [drm] Encoders:
[ 3.329580] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.329580] [drm] Connector 1:
[ 3.329581] [drm] HDMI-A-1
[ 3.329581] [drm] HPD3
[ 3.329581] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x6 55c
[ 3.329582] [drm] Encoders:
[ 3.329582] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.329582] [drm] Connector 2:
[ 3.329582] [drm] DVI-D-1
[ 3.329583] [drm] HPD1
[ 3.329583] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x6 56c
[ 3.329583] [drm] Encoders:
[ 3.329584] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.329584] [drm] Connector 3:
[ 3.329584] [drm] DVI-I-1
[ 3.329584] [drm] HPD6
[ 3.329585] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x6 58c
[ 3.329585] [drm] Encoders:
[ 3.329586] [drm] DFP4: INTERNAL_UNIPHY
[ 3.329586] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.416705] [drm] fb mappable at 0xC0721000
[ 3.416705] [drm] vram apper at 0xC0000000
[ 3.416706] [drm] size 8294400
[ 3.416706] [drm] fb depth is 24
[ 3.416706] [drm] pitch is 7680
[ 3.416795] fbcon: radeondrmfb (fb0) is primary device
[ 3.440022] Console: switching to colour frame buffer device 240x67
[ 3.442809] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 3.445122] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on mino r 0
[ 3.445170] [drm] amdgpu kernel modesetting enabled.
[ 3.445217] MXM: GUID detected in BIOS
[ 3.447013] brd: module loaded
[ 3.447030] loop: module loaded
[ 3.449513] usbcore: registered new interface driver rtsx_usb
[ 3.449523] Loading iSCSI transport class v2.0-870.
[ 3.449603] iscsi: registered transport (tcp)
[ 3.449604] megasas: 07.701.17.00-rc1
[ 3.449684] ahci 0000:00:17.0: version 3.0
[ 3.460005] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f im pl SATA mode
[ 3.460006] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum pa rt ems deso sadm sds apst
[ 3.475246] scsi host0: ahci
[ 3.475454] scsi host1: ahci
[ 3.475557] scsi host2: ahci
[ 3.475611] scsi host3: ahci
[ 3.475655] scsi host4: ahci
[ 3.475707] scsi host5: ahci
[ 3.475737] ata1: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17100 irq 122
[ 3.475738] ata2: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17180 irq 122
[ 3.475739] ata3: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17200 irq 122
[ 3.475740] ata4: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17280 irq 122
[ 3.475741] ata5: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17300 irq 122
[ 3.475742] ata6: SATA max UDMA/133 abar m2048@0xdff17000 port 0xdff17380 irq 122
[ 3.476061] tun: Universal TUN/TAP device driver, 1.6
[ 3.476101] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
[ 3.476119] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 3.476120] Copyright (c) 2007 Atheros Corporation.
[ 3.476180] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 3.476206] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 3.476217] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 3.476218] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.476229] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.476230] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.476240] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.476241] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.476252] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.476253] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.476263] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5 .0.0-k
[ 3.476263] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 3.476290] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 3.476290] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 3.476301] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 3.476320] sky2: driver version 1.30
[ 3.476369] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.476372] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM cont rol
[ 3.480527] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffc9000003b000, 30 :9c:23:3f:a5:f0, XID 14100800 IRQ 123
[ 3.480528] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx c hecksumming: ko]
[ 3.480599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.480600] ehci-pci: EHCI PCI platform driver
[ 3.480610] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.480613] ohci-pci: OHCI PCI platform driver
[ 3.480621] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.480790] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.480794] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus numbe r 1
[ 3.481881] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 qu irks 0x00009810
[ 3.481884] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.482088] hub 1-0:1.0: USB hub found
[ 3.482099] hub 1-0:1.0: 12 ports detected
[ 3.488270] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.488272] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus numbe r 2
[ 3.488361] hub 2-0:1.0: USB hub found
[ 3.488368] hub 2-0:1.0: 6 ports detected
[ 3.491489] usbcore: registered new interface driver uas
[ 3.491500] usbcore: registered new interface driver usb-storage
[ 3.491524] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0 x64 irq 1,12
[ 3.494458] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.494483] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.494529] mousedev: PS/2 mouse device common for all mice
[ 3.494682] rtc_cmos 00:06: RTC can wake from S4
[ 3.495036] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.495150] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpe t irqs
[ 3.495160] i2c /dev entries driver
[ 3.495517] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 3.496996] intel_pstate: Intel P-state driver initializing
[ 3.497125] intel_pstate: HWP enabled
[ 3.497129] sdhci: Secure Digital Host Controller Interface driver
[ 3.497130] sdhci: Copyright(c) Pierre Ossman
[ 3.497170] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.497171] No iBFT detected.
[ 3.497172] EFI Variables Facility v0.08 2004-May-17
[ 3.519470] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.519736] usbcore: registered new interface driver usbhid
[ 3.519737] usbhid: USB HID core driver
[ 3.519921] NET: Registered protocol family 10
[ 3.520047] Segment Routing with IPv6
[ 3.520056] NET: Registered protocol family 17
[ 3.520068] Key type dns_resolver registered
[ 3.520130] microcode: sig=0x906e9, pf=0x2, revision=0x5e
[ 3.520159] microcode: Microcode Update Driver: v2.2.
[ 3.520418] Btrfs loaded, crc32c=crc32c-generic
[ 3.520935] console [netcon0] enabled
[ 3.520936] netconsole: network logging started
[ 3.521055] rtc_cmos 00:06: setting system clock to 2018-01-02 20:57:53 UTC ( 1514926673)
[ 3.521106] ALSA device list:
[ 3.521106] No soundcards found.
[ 3.786335] ata1: SATA link down (SStatus 4 SControl 300)
[ 3.786354] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.786400] ata3: SATA link down (SStatus 4 SControl 300)
[ 3.786442] ata6: SATA link down (SStatus 4 SControl 300)
[ 3.786491] ata4: SATA link down (SStatus 4 SControl 300)
[ 3.786507] ata5: SATA link down (SStatus 4 SControl 300)
[ 3.787481] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[ 3.787482] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[ 3.787483] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[ 3.788686] ata2.00: ATA-8: WDC WD5000AAKS-75A7B0, 01.03B01, max UDMA/133
[ 3.788687] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.790080] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[ 3.790081] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[ 3.790082] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[ 3.791263] ata2.00: configured for UDMA/133
[ 3.791426] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-7 3B01 PQ : 0 ANSI: 5
[ 3.791711] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.791831] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.791841] sd 1:0:0:0: [sda] Write Protect is off
[ 3.791841] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.791883] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 3.841030] sda: sda1 sda2
[ 3.841411] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.842424] Freeing unused kernel memory: 3468K
[ 3.842425] Write protecting the kernel read-only data: 40960k
[ 3.843015] Freeing unused kernel memory: 1500K
[ 3.844537] Freeing unused kernel memory: 1336K
[ 3.856488] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 4.032000] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7/input2
[ 4.143288] input: Logitech K360 as /devices/pci0000:00/0000:00:14.0/usb1/1-7 /1-7:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input6
[ 4.143424] logitech-hidpp-device 0003:046D:4004.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:14.0-7:1
[ 4.291506] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 4.529788] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibi lities
[ 4.529935] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibi lities
[ 4.548554] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.109783] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SEL INUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL - XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 8.109872] systemd[1]: Detected architecture x86-64.
[ 8.110009] systemd[1]: Set hostname to <Lakka>.
[ 8.132420] systemd[1]: Listening on udev Kernel Socket.
[ 8.161692] systemd[1]: Reached target Swap.
[ 8.161735] systemd[1]: Listening on Journal Socket.
[ 8.161760] systemd[1]: Listening on udev Control Socket.
[ 8.161972] systemd[1]: Created slice User and Session Slice.
[ 8.162033] systemd[1]: Created slice System Slice.
[ 8.162832] systemd[1]: Starting Load Kernel Modules...
[ 8.238464] systemd-journald[271]: Received request to flush runtime journal from PID 1
[ 8.876302] r8169 0000:03:00.0 eth0: link down
[ 8.876383] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.961716] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 8.961718] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 8.977739] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:14. 0/usb1/1-8/1-8:1.0/input/input7
[ 8.980181] usbcore: registered new interface driver xpad
[ 9.027064] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00: 01.0/0000:01:00.1/sound/card0/input8
[ 9.035654] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00: 01.0/0000:01:00.1/sound/card0/input9
[ 9.037886] intel_rapl: Found RAPL domain package
[ 9.037888] intel_rapl: Found RAPL domain core
[ 9.037889] intel_rapl: Found RAPL domain dram
[ 9.039323] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00: 01.0/0000:01:00.1/sound/card0/input10
[ 9.041477] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00: 01.0/0000:01:00.1/sound/card0/input11
[ 9.047306] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00 :01.0/0000:01:00.1/sound/card0/input12
[ 9.048952] wl: loading out-of-tree module taints kernel.
[ 9.048954] wl: module license 'MIXED/Proprietary' taints kernel.
[ 9.048955] Disabling lock debugging due to kernel taint
[ 9.052328] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00 :01.0/0000:01:00.1/sound/card0/input13
[ 9.082793] ath9k 0000:02:00.0: enabling device (0000 -> 0002)
[ 9.158851] ath: EEPROM regdomain: 0x21
[ 9.158852] ath: EEPROM indicates we should expect a direct regpair map
[ 9.158853] ath: Country alpha2 being used: AU
[ 9.158854] ath: Regpair used: 0x21
[ 9.159327] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.162197] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90000f20000, irq= 17
[ 9.169084] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.373951] wlan0: authenticate with 68:7f:74:52:d5:dc
[ 9.385550] wlan0: send auth to 68:7f:74:52:d5:dc (try 1/3)
[ 9.421430] wlan0: authenticated
[ 9.421505] ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 9.422518] wlan0: associate with 68:7f:74:52:d5:dc (try 1/3)
[ 9.472336] wlan0: RX AssocResp from 68:7f:74:52:d5:dc (capab=0x411 status=0 aid=9)
[ 9.472408] wlan0: associated
[ 9.472431] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 10.131017] snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated fo r card #0. Suggest a bigger bdl_pos_adj.
[ 246.703290] xpad 1-8:1.0: xpad_irq_in - usb_submit_urb failed with result -1
[ 800.066359] retroarch[655]: segfault at c18 ip 00000000004d7810 sp 00007fb28d d86b78 error 4 in retroarch[400000+29d000]
Lakka:~ #
Lakka:~ #

#7

[INFO] RetroArch 1.6.9 (Git c056726)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES
Built: Nov 21 2017
[INFO] Version: 1.6.9
[INFO] Git: c056726
[INFO] =================================================
[INFO] [Config]: Loading default config.
[INFO] [Config]: loading config from: (null).
[INFO] Looking for config in: "/storage/.config/retroarch/retroarch.cfg".
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 4 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 38 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: no
[INFO] [DRM]: Connector 3 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 50 Hz
[INFO] [DRM]: Mode 12: (1920x1080i) 1920 x 1080, 50 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 15: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 16: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 17: (1680x1050) 1680 x 1050, 60 Hz
[INFO] [DRM]: Mode 18: (1600x900) 1600 x 900, 60 Hz
[INFO] [DRM]: Mode 19: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 20: (1152x864) 1152 x 864, 75 Hz
[INFO] [DRM]: Mode 21: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 22: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 23: (1280x720) 1280 x 720, 50 Hz
[INFO] [DRM]: Mode 24: (1280x720) 1280 x 720, 30 Hz
[INFO] [DRM]: Mode 25: (1280x720) 1280 x 720, 30 Hz
[INFO] [DRM]: Mode 26: (1280x720) 1280 x 720, 24 Hz
[INFO] [DRM]: Mode 27: (1280x720) 1280 x 720, 24 Hz
[INFO] [DRM]: Mode 28: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 29: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 30: (720x576) 720 x 576, 50 Hz
[INFO] [DRM]: Mode 31: (720x576i) 720 x 576, 50 Hz
[INFO] [DRM]: Mode 32: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 33: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 34: (720x480i) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 35: (720x480i) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 36: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 37: (640x480) 640 x 480, 60 Hz
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[WARN] [KMS]: Swap intervals > 1 currently not supported. Will use swap interval of 1.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7fb2880b7910.
[INFO] [KMS]: New FB: 1920x1080 (stride: 7680).
Segmentation fault (core dumped)
[INFO] RetroArch 1.6.9 (Git c056726)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES
Built: Nov 21 2017
[INFO] Version: 1.6.9
[INFO] Git: c056726
[INFO] =================================================
[INFO] [Config]: Loading default config.
[INFO] [Config]: loading config from: (null).
[INFO] Looking for config in: "/storage/.config/retroarch/retroarch.cfg".
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 4 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 38 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: no
[INFO] [DRM]: Connector 3 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 50 Hz
[INFO] [DRM]: Mode 12: (1920x1080i) 1920 x 1080, 50 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 15: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 16: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 17: (1680x1050) 1680 x 1050, 60 Hz
[INFO] [DRM]: Mode 18: (1600x900) 1600 x 900, 60 Hz
[INFO] [DRM]: Mode 19: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 20: (1152x864) 1152 x 864, 75 Hz
[INFO] [DRM]: Mode 21: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 22: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 23: (1280x720) 1280 x 720, 50 Hz
[INFO] [DRM]: Mode 24: (1280x720) 1280 x 720, 30 Hz
[INFO] [DRM]: Mode 25: (1280x720) 1280 x 720, 30 Hz
[INFO] [DRM]: Mode 26: (1280x720) 1280 x 720, 24 Hz
[INFO] [DRM]: Mode 27: (1280x720) 1280 x 720, 24 Hz
[INFO] [DRM]: Mode 28: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 29: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 30: (720x576) 720 x 576, 50 Hz
[INFO] [DRM]: Mode 31: (720x576i) 720 x 576, 50 Hz
[INFO] [DRM]: Mode 32: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 33: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 34: (720x480i) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 35: (720x480i) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 36: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 37: (640x480) 640 x 480, 60 Hz
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[WARN] [KMS]: Swap intervals > 1 currently not supported. Will use swap interval of 1.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7f3c100b7910.
[INFO] [KMS]: New FB: 1920x1080 (stride: 7680).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD BONAIRE (DRM 2.49.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event3).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports 16 force feedback effects.
[INFO] [Autoconf]: 190 profiles found.
[INFO] [Autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
function is no-op
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 7680).
function is no-op
[INFO] [KMS]: New FB: 1920x1080 (stride: 7680).
[INFO] RetroArch 1.6.9 (Git c056726)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES
Built: Nov 21 2017
[INFO] Version: 1.6.9
[INFO] Git: c056726
[INFO] =================================================
[INFO] [Config]: Loading default config.
[INFO] [Config]: loading config from: (null).
[INFO] Looking for config in: "/storage/.config/retroarch/retroarch.cfg".
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 4 connectors.
[INFO] [DRM]: Connector 0 connected: yes
[INFO] [DRM]: Connector 0 has 38 modes.
[INFO] [DRM]: Connector 0 assigned to monitor index: #1.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: no
[INFO] [DRM]: Connector 3 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 50 Hz
[INFO] [DRM]: Mode 12: (1920x1080i) 1920 x 1080, 50 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 15: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 16: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 17: (1680x1050) 1680 x 1050, 60 Hz
[INFO] [DRM]: Mode 18: (1600x900) 1600 x 900, 60 Hz
[INFO] [DRM]: Mode 19: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 20: (1152x864) 1152 x 864, 75 Hz
[INFO] [DRM]: Mode 21: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 22: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 23: (1280x720) 1280 x 720, 50 Hz
[INFO] [DRM]: Mode 24: (1280x720) 1280 x 720, 30 Hz
[INFO] [DRM]: Mode 25: (1280x720) 1280 x 720, 30 Hz
[INFO] [DRM]: Mode 26: (1280x720) 1280 x 720, 24 Hz
[INFO] [DRM]: Mode 27: (1280x720) 1280 x 720, 24 Hz
[INFO] [DRM]: Mode 28: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 29: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 30: (720x576) 720 x 576, 50 Hz
[INFO] [DRM]: Mode 31: (720x576i) 720 x 576, 50 Hz
[INFO] [DRM]: Mode 32: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 33: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 34: (720x480i) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 35: (720x480i) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 36: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 37: (640x480) 640 x 480, 60 Hz
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
libGL: Can't open configuration file /storage/.drirc: No such file or directory.
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[WARN] [KMS]: Swap intervals > 1 currently not supported. Will use swap interval of 1.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7f49100c2810.
[INFO] [KMS]: New FB: 1920x1080 (stride: 7680).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD BONAIRE (DRM 2.49.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event3).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event4) supports 16 force feedback effects.
[INFO] [Autoconf]: 190 profiles found.
[INFO] [Autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
function is no-op
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 7680).
function is no-op
[INFO] [KMS]: New FB: 1920x1080 (stride: 7680).

#8

Lakka (official): 2.1 (Generic.x86_64)
Lakka:~ # aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA ATI HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA ATI HDMI, HDMI 2
HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 3
HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
HDA ATI HDMI, HDMI 4
HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
HDA ATI HDMI, HDMI 5
HDMI Audio Output

#9

HELP!!! i dont know how to create a post so i have to reply until i figure out how to create a post.
i have a Acer Aspire REVO R1600-U914He - ultra-slim desktop https://www.cnet.com/products/acer-aspire-revo-r1600-u914he-ultra-slim-desktop-atom-n230-1-6-ghz-1-gb-160-gb/specs/ I want to remove the internal hdd and boot lakka on one usb and load games off another usb, is this possible? i think without the os on the internal hdd the computer bios will still start and i could boot off usb but i dont know if the lakka intall usb would install onto a second usb. also when i used lakka boot usb, (not installed) on another pc, there was no sound, hdmi to tv.

#10

You can make new threads after like 5 or 10 minutes of being logged into the forum. It’s an antispam measure.

I don’t think you can install Lakka to a USB drive, but you can run the live version from USB. You should try the live version on the machine you’re actually wanting to use. Your experience with the other machine is not really applicable.

#11

thanks for the help! am i able to format the HDD inside the acer wiping windows os, then use the “install lakka usb” to install it directly on the HDD so that its the only operating system on the pc or does the pc need to have windows on it? also, is there front end skins for lakke that i would need to put on a usb to install as this pc wont have the internet. Thank you for all your help

#12

Did you have to hijack my thread? Lol just kidding. :grinning:

Anyone notice anything in my log that might explain my problem?

#13

I don’t see anything specific, but people often have to set their audio device in Lakka correctly to get the audio working, as per this page: http://www.lakka.tv/doc/Audio-settings/

@loki6869 The PC doesn’t need Windows on it, but you’ll want to have another PC around for remote troubleshooting via ssh. Lakka doesn’t support any skins or anything, just RetroArch’s menus.

#14

@jabedoben We can see a segfault from dmesg but not with RetroArch log… ?

Can you try to play sound following this tutorial ?

By the way what is the output of ?

lspci -nnk | grep -A3 VGA

Thank you.

#15

01:00.0 VGA compatible controller [0300] : Advanced Micro Devices, Inc. [AMD/ATI]

Bonaire XT [Radeon HD 7790/8770 / R7 360 / R9 260/360 OEM] [1002:665c] Subsystem: Micro-Star International Co., LTD. [MSI] Bonaire XT [Radeon HD 7790/8770 / R7 360 / R9 260/360 OEM] (Radeon HD 7790 OC) [1462:2930] Kernel driver in use: Radeon 01:00.1 Audio device [0403]: Advance Micro Devices, Inc. [AMD/ATI] Device [1002:0002]

#16

Can you try to play some sound with aplay ?