Concerning the black bar you may be seeing in some of the Chrono Trigger screens, you might need to change the Crop Mode to 1 (CROP BLACK ONLY). This is because the black bars is not visible for the entire game so if you use the Crop Mode 2 setting it will be cutting off visible parts of the screen in the scenes where there’s no black bar at the bottom.
Be sure to adjust the Black Threshold for ‘CROP BLACK ONLY’ as well.
I’m seeing it. It looks like a very even brushed finish. Looks good I must say.
Right! It’s a bit gritty, which I like. Not sure how it’s supposed to look now though? 
Hmm. Didn’t think I could get rid of that black bar.
I changed Crop Mode to 1 now (Crop Black Only) and Black Threshold for “Crop Black Only” to 1 as well, black bar is still there though.
Edit: Ah, needed to change “Crop Bottom %” to 6.7 as well.
Now it’s gone!
Will this apply to every other Snes game as well, or is it different for every one?
These scanlines on the surrounding graphic.
Yep.
Did you also increase the Crop Bottom %?
Crop Mode 1
Crop Bottom % 6.30
Black Threshold 100
Seems to work for me.
By the way, are you using the latest RetroArch, HSM Mega Bezel Reflection Shader and Shader Preset/Graphics packs?
Ok, now I see it. I zoomed into my own screenshot as well.
So I’m guessing the shader isn’t supposed to touch the graphics at all? 
Correct. I am using the Nvidia 517.48 driver. I am willing to bet there is a bug in the driver but am not willing to test it ATM.
6.70 seem to be the bottom for me
And yeah, RA 1.12 latest stable. Latest HSM and your latest pack, and Duimons 1.0.0.0
Very possible, they have a lot of weird bugs sometimes. It doesn’t bother me for now though, still looks really good. I’m a bit reluctant myself to update to the latest driver which is 526.47.
But we’ll see if it goes away later then!
Possibly a bug here also. I am just not in the position to do any tests.
No worries, I’m not in the mood either to go bug hunting right now. We’ll just leave it for now!
By the way, I have a feeling you might like my CyberLab__RGB-Sharp__PVM-Edition.slangp preset just as much if not better than my CyberLab__RGB-Smooth__PVM-Edition.slangp preset. It’s very much like the RGB-Smooth one just slightly less upscaled to give it a bit more natural console and TV feel but it’s far from being overly harsh.
Don’t forget to try the OLED TV tweaks I mentioned previously.
I’ll check it out!
I did try those mask parameters you mentioned, but they looked… bad. I could have been messing with the wrong one’s though.
Either that or your TV is not in RGB 4:4:4 mode.
The difference is supposed to be very subtle. Almost imperceptible from a normal viewing distance but noticeable if you go up to the screen and look at the phosphors.
Changing the Mask Size to 1 is also very important if you change the CRT Mask to 12.
The only other change is the Mask Layout from 0 to 1.
Also, you should ideally be using PC labelled HDMI input and Game Mode. Also ensure that you have HDMI Deep Color enabled for your HDMI input.
You’re right. Not sure why but I was in YCbcC444, not in RGB.
I had some issues with a HDMI cable, but I got a new one, so now that’s working as well!
10m HDMI fiber optic cable 
That’s all done already
I love your slot mask presets with my LG C1 but I think you need to thicken up the scanlines. They are barely noticeable.
Thanks, which preset or presets are you referring to that have scanlines that are barely noticeable and on what cores is this happening?
Have you tried “CyberLab__Ultimate_Virtual_Slot_Mask_IV_OLED_CRT-NP2RTA__ADV.slangp”?
It uses the darkest and thickest scanline type.
You can make the scanlines in any preset more visible/thicker/darker by increasing the GSL Scanline Type value.
You can also try disabling Deconvergence and fiddling around with the beam width.
You can take a look at some of these photos of some real arcade slot mask CRTs that I took recently.
When an NES game is good, it’s really good!
Right click on the image, click Open in New Tab then press F11 for Fullscreen for 4K users. Zoom in until it looks right for 1440p or 1080p users.
CyberLab_NES_Composite_Slot_Mask_IV_OLED_for_Core_Blargg_S-Video_Filter.slangp + Core Blargg S-Video Filter
CyberLab_Turbo_Duo_Composite_Slot_Mask_IV_OLED_for_CyberLab_Blargg_Video_Filter.slangp + Blargg_NTSC_Turbo_Duo_SNES_PSX_Composite_CyberLab_Special_Edition.filt
CyberLab__Ultimate_Virtual_Slot_Mask_IV_OLED_CRT-NP2RTA__ADV.slangp
