I have been installed Lakka to the local hard disk, but when the lakka started will stay on the logo screen. Because of i cannot get into the menu interface, so can not be set to open SSH service, i see the official has said that the logo is stuck in the picture is caused by the default graphics settings and config file set matching problem. But now i can not be SSH to the host, how to modify the config? Please help me!!
1 Like
Hi,
As you installed it you will need to edit syslinux configuration file and append to the cmdline ssh to enable ssh service.
thanks alot for you reply! Under your advice I have opened SSH and login to Lakka
I later looked at VGA card：
#for p in /sys/class/drm/*/status; do con=${p%/status}; echo -n "${con#*/card?-}: "; cat $p; done
DVI-D-1: disconnected
LVDS-1: disconnected
SVIDEO-1: disconnected
VGA-1: connected
And Edit the file /flash/syslinux.cfg with nano, add “video=LVDS-1:d” to the end. And reboot the lakka
Then it is still stuck on the logo screen, Unable to display the XMB interface
Did I still miss anything？
And there is retroarch logs
# retroarch -v
[INFO] RetroArch 1.6.9 (Git c056726)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3
Built: Nov 21 2017
[INFO] Version: 1.6.9
[INFO] Git: c056726
[INFO] =================================================
[INFO] [Config]: Loading default config.
[INFO] [Config]: loading config from: (null).
[INFO] Looking for config in: "/storage/.config/retroarch/retroarch.cfg".
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 4 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: yes
[INFO] [DRM]: Connector 1 has 19 modes.
[INFO] [DRM]: Connector 1 assigned to monitor index: #1.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: no
[INFO] [DRM]: Connector 3 has 0 modes.
[INFO] [DRM]: Mode 0: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 1: (1280x1024) 1280 x 1024, 75 Hz
[INFO] [DRM]: Mode 2: (1152x864) 1152 x 864, 75 Hz
[INFO] [DRM]: Mode 3: (1024x768) 1024 x 768, 85 Hz
[INFO] [DRM]: Mode 4: (1024x768) 1024 x 768, 75 Hz
[INFO] [DRM]: Mode 5: (1024x768) 1024 x 768, 70 Hz
[INFO] [DRM]: Mode 6: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 7: (832x624) 832 x 624, 75 Hz
[INFO] [DRM]: Mode 8: (800x600) 800 x 600, 85 Hz
[INFO] [DRM]: Mode 9: (800x600) 800 x 600, 75 Hz
[INFO] [DRM]: Mode 10: (800x600) 800 x 600, 72 Hz
[INFO] [DRM]: Mode 11: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 12: (800x600) 800 x 600, 56 Hz
[INFO] [DRM]: Mode 13: (640x480) 640 x 480, 85 Hz
[INFO] [DRM]: Mode 14: (640x480) 640 x 480, 75 Hz
[INFO] [DRM]: Mode 15: (640x480) 640 x 480, 73 Hz
[INFO] [DRM]: Mode 16: (640x480) 640 x 480, 67 Hz
[INFO] [DRM]: Mode 17: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 18: (720x400) 720 x 400, 70 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1280x1024.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0xb460ef30.
[INFO] [KMS]: New FB: 1280x1024 (stride: 8192).
[INFO] [GL]: Vendor: Intel Open Source Technology Center, Renderer: Mesa DRI Intel(R) 945GME x86/MMX/SSE2.
[INFO] [GL]: Version: 1.4 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1280x1024
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Linker log: warning: Couldn't flatten if-statement. This will likely result in software rasterization.
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event0).
[INFO] [udev]: Mouse #0 (/dev/input/event2).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Mouse #2 (/dev/input/event3).
[INFO] [udev]: Mouse #3 (/dev/input/mouse1).
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 1024 frames
[INFO] ALSA: Buffer size: 2048 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
Segmentation faulti have try to edit retroarch.cfg in a text mode and changing menu_driver = “xmb” to menu_driver = “rgui” or “glui”
it’s can work！
why not in “xmb” ?
Thank you for the logs.
Try to disable ribbon by editing the configuration file
systemctl stop retroarch
nano .config/retroarch/retroarch.cfg
and edit it with menu_shader_pipeline = "0" (ctrl+w to search, ctrl+o to save and ctrl+x to quit).
@gouchi thank you very much!
Yes, I look over the forum records to find the solution and get in. And so sorry I haven’t had time to reply to the result.
Now one more problem is the PSP games that can be run before lakka(version<=2.1) But Now it can’t be run in the lakka(version=2.1)
I’m sure I’ve loaded PSP core
The ppsspp core has been updated to follow upstream version.