Lakka 2.1.1 Audio Issues Using HDMI

Nathanking · 10 August 2018 13:42

I don’t want to be that one guy who says he’s tried every single fix he could find online and still nothing has worked, but here we are. I’ll try literally anything anyone suggests, even if I’ve already done it.

I had Lakka running live from a USB using a spare PC with a GTX 770, and it was fine. Audio was great, picture was great, but I use the PC for modern games too, so I decided to upgrade to an RX 580. Now no matter what audio device I use, there’s no audio. The setup is exactly the same: HDMI from the GPU to my receiver, which is plugged in to my TV. This issue is present in both the stable release 2.1, and this newer 2.1.1 release.

Here are some system logs:

[INFO] RetroArch 1.7.3 (Git 2a2e732)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES
Built: Jun 23 2018
[INFO] Version: 1.7.3
[INFO] Git: 2a2e732
[INFO] =================================================
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 5 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: yes
[INFO] [DRM]: Connector 3 has 25 modes.
[INFO] [DRM]: Connector 3 assigned to monitor index: #1.
[INFO] [DRM]: Connector 4 connected: no
[INFO] [DRM]: Connector 4 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 12: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 15: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 16: (1360x768) 1360 x 768, 60 Hz
[INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 21: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7f27d807feb0.
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD POLARIS10 (DRM 3.10.0 /                         4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ...
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ...
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting t                        o pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event2).
[INFO] [udev]: Keyboard #1 (/dev/input/event5).
[INFO] [udev]: Mouse #0 (/dev/input/event4).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event17) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event17) supports 16 force feedback effects.
[INFO] [Autoconf]: 208 profiles found.
[INFO] [autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360                        _pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: null
[INFO] Found shader "/tmp/shaders/bilinear.glslp"
[INFO] Found shader "/tmp/shaders/nearest.glslp"
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 1024 frames
[INFO] ALSA: Buffer size: 2048 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [LED]: LED driver = 'null' 0x76a0c0
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.l                        pl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.l                        pl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.l                        pl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).

26:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480] [1002:67df] (rev e7)
        Subsystem: Gigabyte Technology Co., Ltd Ellesmere [Radeon RX 470/480] [1458:22f1]
        Kernel driver in use: amdgpu
26:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:aaf0]

null
    Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA ATI HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA ATI HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA ATI HDMI, HDMI 4
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
    HDA ATI HDMI, HDMI 5
    HDMI Audio Output
default:CARD=Generic
    HD-Audio Generic, ALC892 Analog
    Default Audio Device
sysdefault:CARD=Generic
    HD-Audio Generic, ALC892 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    Front speakers
surround21:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
    HD-Audio Generic, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers

gouchi · 10 August 2018 14:38

So you did cycle through all hdmi device and you did not get sound ? You need to close and restart your game for the audio switch to take effect.

Is it possible to get also the ouput of dmesg.

Thank you.

Nathanking · 11 August 2018 09:44

OK, I’ll post the dmesg here while I continue to cycle through the hdmi devices. I have another computer with the same GPU that I haven’t tested this on yet, so I’ll try that as well.

[    0.000000] Linux version 4.11.12-rt14 (kivutar@buildserver3) (gcc version 7.                                 3.0 (GCC) ) #1 SMP PREEMPT RT Sun Jun 17 19:40:49 CEST 2018
[    0.000000] Command line: BOOT_IMAGE=/KERNEL boot=UUID=2306-3555 disk=UUID=f7                                 9e0fec-0391-4743-a410-2b3751a8a359 portable quiet vt.global_cursor_default=0 log                                 level=2
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi                                 sters'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,                                  using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000daf13fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000daf14000-0x00000000dc3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dc400000-0x00000000dc4f4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dc4f5000-0x00000000dc8cbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dc8cc000-0x00000000dd323fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd324000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A320M Pro4, BI                                 OS P4.70 02/12/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000420000000 aka 16896M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x03cf2000, 0x03cf2fff] PGTABLE
[    0.000000] BRK [0x03cf3000, 0x03cf3fff] PGTABLE
[    0.000000] BRK [0x03cf4000, 0x03cf4fff] PGTABLE
[    0.000000] BRK [0x03cf5000, 0x03cf5fff] PGTABLE
[    0.000000] BRK [0x03cf6000, 0x03cf6fff] PGTABLE
[    0.000000] BRK [0x03cf7000, 0x03cf7fff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DC4F5098 0000B4 (v01 ALASKA A M I    0107200                                 9 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DC4FB9A0 000114 (v06 ALASKA A M I    0107200                                 9 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has                                  valid Length but zero Address: 0x0000000000000000/0x1 (20170119/tbfadt-658)
[    0.000000] ACPI: DSDT 0x00000000DC4F51E8 0067B4 (v02 ALASKA A M I    0107200                                 9 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DC8B4E00 000040
[    0.000000] ACPI: APIC 0x00000000DC4FBAB8 0000DE (v03 ALASKA A M I    0107200                                 9 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DC4FBB98 000044 (v01 ALASKA A M I    0107200                                 9 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DC4FBBE0 00009C (v01 ALASKA A M I    0107200                                 9 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DC4FBC80 008C98 (v02 AMD    AMD ALIB 0000000                                 2 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DC504918 001A58 (v01 AMD    AMD CPU  0000000                                 1 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DC506370 000BD0 (v01 AMD    AMD CRAT 0000000                                 1 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DC506F40 000029 (v01 AMD    AMD CDIT 0000000                                 1 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DC506F70 002CB7 (v01 AMD    AMD AOD  0000000                                 1 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DC509C28 00003C (v01 ALASKA A M I    0107200                                 9 MSFT 00010013)
[    0.000000] ACPI: AAFT 0x00000000DC509C68 00022C (v01 ALASKA OEMAAFT  0107200                                 9 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DC509E98 000038 (v01 ALASKA A M I    0107200                                 9 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DC509ED0 000024 (v01 AMDFCH FCHZP    0000100                                 0 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DC509EF8 000042 (v01                 0000000                                 0      00000000)
[    0.000000] ACPI: IVRS 0x00000000DC509F40 0000D0 (v02 AMD    AMD IVRS 0000000                                 1 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DC50A010 0000F8 (v01 AMD    AMD PT   0000100                                 0 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DC50A108 001A41 (v01 AMD    AmdTable 0000000                                 1 INTL 20120913)
[    0.000000] ACPI: WSMT 0x00000000DC50BB50 000028 (v01 ALASKA A M I    0107200                                 9 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000003ffffff]
[    0.000000]   node   0: [mem 0x000000000400a000-0x0000000009cfffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000daf13fff]
[    0.000000]   node   0: [mem 0x00000000dc400000-0x00000000dc4f4fff]
[    0.000000]   node   0: [mem 0x00000000dd324000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.000000] On node 0 totalpages: 4177111
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14055 pages used for memmap
[    0.000000]   DMA32 zone: 899515 pages, LIFO batch:31
[    0.000000]   Normal zone: 51150 pages used for memmap
[    0.000000]   Normal zone: 3273600 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff                                 ffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node                                 _ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff88041ec00000 s107904 r8192 d31                                 360 u262144
[    0.000000] pcpu-alloc: s107904 r8192 d31360 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14                                  15
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pag                                 es: 4111821
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosusp                                 end=-1 BOOT_IMAGE=/KERNEL boot=UUID=2306-3555 disk=UUID=f79e0fec-0391-4743-a410-                                 2b3751a8a359 portable quiet vt.global_cursor_default=0 loglevel=2
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 61440 bytes
[    0.000000] log_buf_len min size: 65536 bytes
[    0.000000] log_buf_len: 131072 bytes
[    0.000000] early log buf free: 54820(83%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 16331680K/16708444K available (12779K kernel code, 1042K                                  rwdata, 25292K rodata, 3460K init, 512K bss, 376764K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:4352 nr_irqs:1096 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i                                 dle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.002000] tsc: PIT calibration matches HPET. 1 loops
[    0.002000] tsc: Detected 3193.860 MHz processor
[    0.002000] Calibrating delay loop (skipped), value calculated using timer fr                                 equency.. 6387.72 BogoMIPS (lpj=3193860)
[    0.002000] pid_max: default: 32768 minimum: 301
[    0.002000] ACPI: Core revision 20170119
[    0.007826] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.009012] Dentry cache hash table entries: 2097152 (order: 13, 33554432 byt                                 es)
[    0.013581] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes                                 )
[    0.014872] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014880] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 byte                                 s)
[    0.015094] CPU: Physical Processor ID: 0
[    0.015094] CPU: Processor Core ID: 0
[    0.015101] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.015101] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.015165] Freeing SMP alternatives memory: 40K
[    0.016053] smpboot: Max logical packages: 3
[    0.016056] Switched APIC routing to physical flat.
[    0.017323] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028000] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17,                                  model: 0x1, stepping: 0x1)
[    0.031011] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.031017] ... version:                0
[    0.031017] ... bit width:              48
[    0.031018] ... generic registers:      6
[    0.031018] ... value mask:             0000ffffffffffff
[    0.031019] ... max period:             00007fffffffffff
[    0.031019] ... fixed-purpose events:   0
[    0.031020] ... event mask:             000000000000003f
[    0.043092] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM                                 U counter.
[    0.045006] smp: Bringing up secondary CPUs ...
[    0.056033] x86: Booting SMP configuration:
[    0.056035] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #1                                 0 #11
[    0.278020] smp: Brought up 1 node, 12 CPUs
[    0.278020] smpboot: Total of 12 processors activated (76539.91 BogoMIPS)
[    0.279097] sched_clock: Marking stable (279000000, 0)->(430623900, -15162390                                 0)
[    0.279403] devtmpfs: initialized
[    0.279644] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (4096                                 0 bytes)
[    0.279645] PM: Registering ACPI NVS region [mem 0xdc4f5000-0xdc8cbfff] (4026                                 368 bytes)
[    0.279730] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                 x_idle_ns: 1911260446275000 ns
[    0.279759] futex hash table entries: 4096 (order: 7, 524288 bytes)
[    0.279830] xor: automatically using best checksumming function   avx
[    0.279854] pinctrl core: initialized pinctrl subsystem
[    0.280006] NET: Registered protocol family 16
[    0.280206] cpuidle: using governor ladder
[    0.280232] cpuidle: using governor menu
[    0.280233] PCCT header not found.
[    0.280390] ACPI: bus type PCI registered
[    0.280443] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfb                                 ffffff] (base 0xf8000000)
[    0.280444] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.280450] PCI: Using configuration type 1 for base access
[    0.300012] raid6: sse2x1   gen()  7183 MB/s
[    0.317009] raid6: sse2x1   xor()  7289 MB/s
[    0.334009] raid6: sse2x2   gen() 15773 MB/s
[    0.351013] raid6: sse2x2   xor()  9916 MB/s
[    0.368015] raid6: sse2x4   gen() 15847 MB/s
[    0.385014] raid6: sse2x4   xor()  9250 MB/s
[    0.402015] raid6: avx2x1   gen() 17054 MB/s
[    0.419019] raid6: avx2x1   xor() 13183 MB/s
[    0.436018] raid6: avx2x2   gen() 22011 MB/s
[    0.453019] raid6: avx2x2   xor() 14126 MB/s
[    0.470023] raid6: avx2x4   gen() 23265 MB/s
[    0.487024] raid6: avx2x4   xor() 13513 MB/s
[    0.487025] raid6: using algorithm avx2x4 gen() 23265 MB/s
[    0.487026] raid6: .... xor() 13513 MB/s, rmw enabled
[    0.487026] raid6: using avx2x2 recovery algorithm
[    0.487093] ACPI: Added _OSI(Module Device)
[    0.487094] ACPI: Added _OSI(Processor Device)
[    0.487095] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.487095] ACPI: Added _OSI(Processor Aggregator Device)
[    0.487269] ACPI: Executed 2 blocks of module-level executable AML code
[    0.492092] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.494523] ACPI: Interpreter enabled
[    0.494534] ACPI: (supports S0 S3 S5)
[    0.494534] ACPI: Using IOAPIC for interrupt routing
[    0.494777] PCI: Using host bridge windows from ACPI; if necessary, use "pci=                                 nocrs" and report a bug
[    0.501874] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.501877] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S                                 egments MSI]
[    0.502070] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeC                                 apability]
[    0.502077] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0                                 0-3f] only partially covers this bridge
[    0.502240] PCI host bridge to bus 0000:00
[    0.502242] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.502243] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.502244] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.502245] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.502246] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win                                 dow]
[    0.502246] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win                                 dow]
[    0.502247] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff win                                 dow]
[    0.502248] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff win                                 dow]
[    0.502249] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.502255] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.502330] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.502422] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.502491] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.502590] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.502634] pci 0000:00:01.3: System wakeup disabled by ACPI
[    0.502665] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.502745] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.502808] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.503278] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.503321] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.503358] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.503443] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.503505] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.503598] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.503639] pci 0000:00:07.1: System wakeup disabled by ACPI
[    0.503676] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.503738] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.503833] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.503875] pci 0000:00:08.1: System wakeup disabled by ACPI
[    0.503945] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.504156] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.504365] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.504420] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.504474] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.504528] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.504582] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.504635] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.504688] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.504742] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.504866] pci 0000:03:00.0: [1022:43bc] type 00 class 0x0c0330
[    0.504881] pci 0000:03:00.0: reg 0x10: [mem 0xfd1a0000-0xfd1a7fff 64bit]
[    0.504954] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.504977] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.505006] pci 0000:03:00.1: [1022:43b8] type 00 class 0x010601
[    0.505052] pci 0000:03:00.1: reg 0x24: [mem 0xfd180000-0xfd19ffff]
[    0.505060] pci 0000:03:00.1: reg 0x30: [mem 0xfd100000-0xfd17ffff pref]
[    0.505098] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.505145] pci 0000:03:00.2: [1022:43b3] type 01 class 0x060400
[    0.505211] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.508386] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.508392] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.508394] pci 0000:00:01.3:   bridge window [mem 0xfcc00000-0xfd1fffff]
[    0.508397] pci 0000:00:01.3:   bridge window [mem 0xf0300000-0xf03fffff 64bi                                 t pref]
[    0.508467] pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
[    0.508554] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[    0.508637] pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400
[    0.508715] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[    0.508779] pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400
[    0.508854] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[    0.508922] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.508926] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.508929] pci 0000:03:00.2:   bridge window [mem 0xfcc00000-0xfd0fffff]
[    0.508933] pci 0000:03:00.2:   bridge window [mem 0xf0300000-0xf03fffff 64bi                                 t pref]
[    0.508965] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.509035] pci 0000:24:00.0: [14e4:43b1] type 00 class 0x028000
[    0.509067] pci 0000:24:00.0: reg 0x10: [mem 0xfce00000-0xfce07fff 64bit]
[    0.509089] pci 0000:24:00.0: reg 0x18: [mem 0xfcc00000-0xfcdfffff 64bit]
[    0.509244] pci 0000:24:00.0: supports D1 D2
[    0.509245] pci 0000:24:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.512424] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.512433] pci 0000:1d:06.0:   bridge window [mem 0xfcc00000-0xfcefffff]
[    0.512515] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
[    0.512540] pci 0000:25:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.512576] pci 0000:25:00.0: reg 0x18: [mem 0xfd000000-0xfd000fff 64bit]
[    0.512598] pci 0000:25:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref                                 ]
[    0.512730] pci 0000:25:00.0: supports D1 D2
[    0.512731] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.515073] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.515080] pci 0000:1d:07.0:   bridge window [io  0xf000-0xffff]
[    0.515083] pci 0000:1d:07.0:   bridge window [mem 0xfd000000-0xfd0fffff]
[    0.515087] pci 0000:1d:07.0:   bridge window [mem 0xf0300000-0xf03fffff 64bi                                 t pref]
[    0.515313] pci 0000:26:00.0: [1002:67df] type 00 class 0x030000
[    0.515326] pci 0000:26:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref                                 ]
[    0.515335] pci 0000:26:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref                                 ]
[    0.515340] pci 0000:26:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.515346] pci 0000:26:00.0: reg 0x24: [mem 0xfd600000-0xfd63ffff]
[    0.515352] pci 0000:26:00.0: reg 0x30: [mem 0xfd640000-0xfd65ffff pref]
[    0.515410] pci 0000:26:00.0: supports D1 D2
[    0.515411] pci 0000:26:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.515473] pci 0000:26:00.1: [1002:aaf0] type 00 class 0x040300
[    0.515485] pci 0000:26:00.1: reg 0x10: [mem 0xfd660000-0xfd663fff 64bit]
[    0.515547] pci 0000:26:00.1: supports D1 D2
[    0.518089] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.518093] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.518095] pci 0000:00:03.1:   bridge window [mem 0xfd600000-0xfd6fffff]
[    0.518097] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bi                                 t pref]
[    0.518315] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[    0.518411] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[    0.518424] pci 0000:27:00.2: reg 0x18: [mem 0xfd300000-0xfd3fffff]
[    0.518434] pci 0000:27:00.2: reg 0x24: [mem 0xfd400000-0xfd401fff]
[    0.518501] pci 0000:27:00.3: [1022:145c] type 00 class 0x0c0330
[    0.518510] pci 0000:27:00.3: reg 0x10: [mem 0xfd200000-0xfd2fffff 64bit]
[    0.518552] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[    0.518568] pci 0000:27:00.3: System wakeup disabled by ACPI
[    0.518609] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.518612] pci 0000:00:07.1:   bridge window [mem 0xfd200000-0xfd4fffff]
[    0.518671] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[    0.518756] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[    0.518780] pci 0000:28:00.2: reg 0x24: [mem 0xfd508000-0xfd508fff]
[    0.518813] pci 0000:28:00.2: PME# supported from D3hot D3cold
[    0.518854] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[    0.518860] pci 0000:28:00.3: reg 0x10: [mem 0xfd500000-0xfd507fff]
[    0.518908] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[    0.518962] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.518966] pci 0000:00:08.1:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.519349] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.519395] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.519434] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.519483] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.519527] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.519562] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.519598] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.519633] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.520084] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[    0.520086] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=i                                 o+mem,locks=none
[    0.520089] pci 0000:26:00.0: vgaarb: bridge control possible
[    0.520089] vgaarb: loaded
[    0.520154] SCSI subsystem initialized
[    0.520218] libata version 3.00 loaded.
[    0.520239] ACPI: bus type USB registered
[    0.520256] usbcore: registered new interface driver usbfs
[    0.520264] usbcore: registered new interface driver hub
[    0.520300] usbcore: registered new device driver usb
[    0.520321] pps_core: LinuxPPS API ver. 1 registered
[    0.520322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                 tti <[email protected]>
[    0.520324] PTP clock support registered
[    0.520454] wmi: Mapper loaded
[    0.520464] Advanced Linux Sound Architecture Driver Initialized.
[    0.520464] PCI: Using ACPI for IRQ routing
[    0.523247] PCI: pci_cache_line_size set to 64 bytes
[    0.523308] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.523309] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.523310] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.523310] e820: reserve RAM buffer [mem 0xdaf14000-0xdbffffff]
[    0.523311] e820: reserve RAM buffer [mem 0xdc4f5000-0xdfffffff]
[    0.523311] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.523312] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.523496] clocksource: Switched to clocksource hpet
[    0.523560] FS-Cache: Loaded
[    0.523579] pnp: PnP ACPI init
[    0.523653] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.523655] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.523723] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
[    0.523725] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.523779] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.523930] system 00:03: [io  0x0280-0x028f] has been reserved
[    0.523931] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.523932] system 00:03: [io  0x02a0-0x02af] has been reserved
[    0.523933] system 00:03: [io  0x02b0-0x02bf] has been reserved
[    0.523935] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.524172] pnp 00:04: [dma 0 disabled]
[    0.524201] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.524393] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.524395] system 00:05: [io  0x040b] has been reserved
[    0.524396] system 00:05: [io  0x04d6] has been reserved
[    0.524397] system 00:05: [io  0x0c00-0x0c01] has been reserved

Nathanking · 11 August 2018 09:45

[    0.524398] system 00:05: [io  0x0c14] has been reserved
[    0.524399] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.524400] system 00:05: [io  0x0c52] has been reserved
[    0.524401] system 00:05: [io  0x0c6c] has been reserved
[    0.524402] system 00:05: [io  0x0c6f] has been reserved
[    0.524403] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.524404] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.524405] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.524406] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.524407] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.524408] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.524409] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.524410] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.524411] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.524412] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.524414] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.524415] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.524416] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.524417] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.524418] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.524419] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.524420] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.524423] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.524731] pnp: PnP ACPI: found 6 devices
[    0.531291] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id                                 le_ns: 2085701024 ns
[    0.531334] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.531343] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.531347] pci 0000:1d:06.0:   bridge window [mem 0xfcc00000-0xfcefffff]
[    0.531353] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.531355] pci 0000:1d:07.0:   bridge window [io  0xf000-0xffff]
[    0.531358] pci 0000:1d:07.0:   bridge window [mem 0xfd000000-0xfd0fffff]
[    0.531361] pci 0000:1d:07.0:   bridge window [mem 0xf0300000-0xf03fffff 64bi                                 t pref]
[    0.531365] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.531366] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.531369] pci 0000:03:00.2:   bridge window [mem 0xfcc00000-0xfd0fffff]
[    0.531372] pci 0000:03:00.2:   bridge window [mem 0xf0300000-0xf03fffff 64bi                                 t pref]
[    0.531376] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.531377] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.531379] pci 0000:00:01.3:   bridge window [mem 0xfcc00000-0xfd1fffff]
[    0.531380] pci 0000:00:01.3:   bridge window [mem 0xf0300000-0xf03fffff 64bi                                 t pref]
[    0.531383] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.531384] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.531386] pci 0000:00:03.1:   bridge window [mem 0xfd600000-0xfd6fffff]
[    0.531387] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bi                                 t pref]
[    0.531390] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.531392] pci 0000:00:07.1:   bridge window [mem 0xfd200000-0xfd4fffff]
[    0.531395] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.531397] pci 0000:00:08.1:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.531401] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.531402] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.531403] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.531403] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.531404] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.531405] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.531406] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.531406] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.531407] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.531408] pci_bus 0000:03: resource 1 [mem 0xfcc00000-0xfd1fffff]
[    0.531409] pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref                                 ]
[    0.531409] pci_bus 0000:1d: resource 0 [io  0xf000-0xffff]
[    0.531410] pci_bus 0000:1d: resource 1 [mem 0xfcc00000-0xfd0fffff]
[    0.531411] pci_bus 0000:1d: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref                                 ]
[    0.531412] pci_bus 0000:24: resource 1 [mem 0xfcc00000-0xfcefffff]
[    0.531412] pci_bus 0000:25: resource 0 [io  0xf000-0xffff]
[    0.531413] pci_bus 0000:25: resource 1 [mem 0xfd000000-0xfd0fffff]
[    0.531414] pci_bus 0000:25: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref                                 ]
[    0.531415] pci_bus 0000:26: resource 0 [io  0xe000-0xefff]
[    0.531415] pci_bus 0000:26: resource 1 [mem 0xfd600000-0xfd6fffff]
[    0.531416] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref                                 ]
[    0.531417] pci_bus 0000:27: resource 1 [mem 0xfd200000-0xfd4fffff]
[    0.531418] pci_bus 0000:28: resource 1 [mem 0xfd500000-0xfd5fffff]
[    0.531465] NET: Registered protocol family 2
[    0.531609] TCP established hash table entries: 131072 (order: 8, 1048576 byt                                 es)
[    0.531889] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    0.532157] TCP: Hash tables configured (established 131072 bind 65536)
[    0.532233] UDP hash table entries: 8192 (order: 8, 1048576 bytes)
[    0.532378] UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes)
[    0.532553] NET: Registered protocol family 1
[    0.532802] RPC: Registered named UNIX socket transport module.
[    0.532803] RPC: Registered udp transport module.
[    0.532803] RPC: Registered tcp transport module.
[    0.532804] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.532935] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c00                                 00-0x000dffff]
[    0.533054] PCI: CLS 64 bytes, default 64
[    0.559361] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.559363] software IO TLB [mem 0xd6f14000-0xdaf14000] (64MB) mapped at [fff                                 f8800d6f14000-ffff8800daf13fff]
[    0.559430] perf: AMD NB counters detected
[    0.559432] perf: AMD LLC counters detected
[    0.561248] Scanning for low memory corruption every 60 seconds
[    0.561649] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.563142] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.563180] FS-Cache: Netfs 'nfs' registered for caching
[    0.563289] NFS: Registering the id_resolver key type
[    0.563294] Key type id_resolver registered
[    0.563295] Key type id_legacy registered
[    0.563298] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.563432] FS-Cache: Netfs 'cifs' registered for caching
[    0.565564] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                 50)
[    0.565565] io scheduler noop registered
[    0.565601] io scheduler cfq registered (default)
[    0.565602] io scheduler mq-deadline registered
[    0.567386] pcieport 0000:00:01.3: AER enabled with IRQ 25
[    0.567449] pcieport 0000:00:03.1: AER enabled with IRQ 26
[    0.567531] pcieport 0000:00:07.1: AER enabled with IRQ 27
[    0.567597] pcieport 0000:00:08.1: AER enabled with IRQ 29
[    0.567635] pcieport 0000:00:01.3: Signaling PME with IRQ 25
[    0.567669] pcieport 0000:00:03.1: Signaling PME with IRQ 26
[    0.567704] pcieport 0000:00:07.1: Signaling PME with IRQ 27
[    0.567737] pcieport 0000:00:08.1: Signaling PME with IRQ 29
[    0.567796] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0                                 0/input/input0
[    0.567798] ACPI: Power Button [PWRB]
[    0.567830] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp                                 ut1
[    0.567831] ACPI: Power Button [PWRF]
[    0.572222] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.593138] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655                                 0A
[    0.593467] Linux agpgart interface v0.103
[    0.593527] [drm] radeon kernel modesetting enabled.
[    0.593621] [drm] amdgpu kernel modesetting enabled.
[    0.593819] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x                                 1458:0x22F1 0xE7).
[    0.593828] [drm] register mmio base: 0xFD600000
[    0.593829] [drm] register mmio size: 262144
[    0.593832] [drm] doorbell mmio base: 0xF0000000
[    0.593832] [drm] doorbell mmio size: 2097152
[    0.593837] [drm] probing gen 2 caps for device 1022:1453 = 737903/e
[    0.593838] [drm] probing mlw for device 1022:1453 = 737903
[    0.593843] [drm] UVD is enabled in VM mode
[    0.593843] [drm] VCE enabled in VM mode
[    0.617939] [drm] BIOS signature incorrect 20 7
[    0.617942] amdgpu 0000:26:00.0: Invalid PCI ROM header signature: expecting                                  0xaa55, got 0xffff
[    0.617957] ATOM BIOS: GV
[    0.617963] [drm] GPU post is not needed
[    0.618071] amdgpu 0000:26:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001F                                 FFFFFFF (8192M used)
[    0.618072] amdgpu 0000:26:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FF                                 FFFFFF
[    0.618075] [drm] Detected VRAM RAM=8192M, BAR=256M
[    0.618075] [drm] RAM width 256bits GDDR5
[    0.618149] [TTM] Zone  kernel: Available graphics memory: 8165860 kiB
[    0.618150] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    0.618150] [TTM] Initializing pool allocator
[    0.618154] [TTM] Initializing DMA pool allocator
[    0.618176] [drm] amdgpu: 8192M of VRAM memory ready
[    0.618176] [drm] amdgpu: 8192M of GTT memory ready.
[    0.618185] [drm] GART: num cpu pages 2097152, num gpu pages 2097152
[    0.620134] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
[    0.620145] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.620145] [drm] Driver supports precise vblank timestamp query.
[    0.621005] amdgpu 0000:26:00.0: amdgpu: using MSI.
[    0.622974] [drm] amdgpu: irq initialized.
[    0.623026] amdgpu: [powerplay] amdgpu: powerplay sw initialized
[    0.626201] [drm] AMDGPU Display Connectors
[    0.626202] [drm] Connector 0:
[    0.626202] [drm]   DP-1
[    0.626202] [drm]   HPD6
[    0.626203] [drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x4                                 86b
[    0.626203] [drm]   Encoders:
[    0.626204] [drm]     DFP1: INTERNAL_UNIPHY2
[    0.626204] [drm] Connector 1:
[    0.626204] [drm]   DP-2
[    0.626205] [drm]   HPD4
[    0.626205] [drm]   DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4                                 873
[    0.626205] [drm]   Encoders:
[    0.626206] [drm]     DFP2: INTERNAL_UNIPHY2
[    0.626206] [drm] Connector 2:
[    0.626206] [drm]   DP-3
[    0.626206] [drm]   HPD1
[    0.626207] [drm]   DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x4                                 86f
[    0.626207] [drm]   Encoders:
[    0.626208] [drm]     DFP3: INTERNAL_UNIPHY1
[    0.626208] [drm] Connector 3:
[    0.626208] [drm]   HDMI-A-1
[    0.626208] [drm]   HPD5
[    0.626209] [drm]   DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4                                 877
[    0.626209] [drm]   Encoders:
[    0.626209] [drm]     DFP4: INTERNAL_UNIPHY1
[    0.626210] [drm] Connector 4:
[    0.626210] [drm]   DVI-D-1
[    0.626210] [drm]   HPD3
[    0.626211] [drm]   DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x4                                 87f
[    0.626211] [drm]   Encoders:
[    0.626211] [drm]     DFP5: INTERNAL_UNIPHY
[    0.626314] amdgpu 0000:26:00.0: fence driver on ring 0 use gpu addr 0x000000                                 0200000008, cpu addr 0xffff88040ab77008
[    0.628098] amdgpu 0000:26:00.0: fence driver on ring 1 use gpu addr 0x000000                                 0200000018, cpu addr 0xffff88040ab77018
[    0.629792] amdgpu 0000:26:00.0: fence driver on ring 2 use gpu addr 0x000000                                 0200000028, cpu addr 0xffff88040ab77028
[    0.630901] amdgpu 0000:26:00.0: fence driver on ring 3 use gpu addr 0x000000                                 0200000038, cpu addr 0xffff88040ab77038
[    0.631876] amdgpu 0000:26:00.0: fence driver on ring 4 use gpu addr 0x000000                                 0200000048, cpu addr 0xffff88040ab77048
[    0.631945] amdgpu 0000:26:00.0: fence driver on ring 5 use gpu addr 0x000000                                 0200000058, cpu addr 0xffff88040ab77058
[    0.631997] amdgpu 0000:26:00.0: fence driver on ring 6 use gpu addr 0x000000                                 0200000068, cpu addr 0xffff88040ab77068
[    0.632051] amdgpu 0000:26:00.0: fence driver on ring 7 use gpu addr 0x000000                                 0200000078, cpu addr 0xffff88040ab77078
[    0.632104] amdgpu 0000:26:00.0: fence driver on ring 8 use gpu addr 0x000000                                 0200000088, cpu addr 0xffff88040ab77088
[    0.632154] amdgpu 0000:26:00.0: fence driver on ring 9 use gpu addr 0x000000                                 0200000098, cpu addr 0xffff88040ab77098
[    0.632216] amdgpu 0000:26:00.0: fence driver on ring 10 use gpu addr 0x00000                                 002000000a8, cpu addr 0xffff88040ab770a8
[    0.632268] amdgpu 0000:26:00.0: fence driver on ring 11 use gpu addr 0x00000                                 002000000b8, cpu addr 0xffff88040ab770b8
[    0.632281] [drm] Found UVD firmware Version: 1.79 Family ID: 16
[    0.632613] amdgpu 0000:26:00.0: fence driver on ring 12 use gpu addr 0x00000                                 00001165420, cpu addr 0xffffc9000345a420
[    0.632622] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[    0.632706] amdgpu 0000:26:00.0: fence driver on ring 13 use gpu addr 0x00000                                 002000000d8, cpu addr 0xffff88040ab770d8
[    0.632752] amdgpu 0000:26:00.0: fence driver on ring 14 use gpu addr 0x00000                                 002000000e8, cpu addr 0xffff88040ab770e8
[    0.676907] amdgpu: [powerplay] [AVFS] Something is broken. See log!
[    0.678725] amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on                                 _sclk table!
[    0.691304] [drm] ring test on 1 succeeded in 11 usecs
[    0.691632] [drm] ring test on 2 succeeded in 23 usecs
[    0.691692] [drm] ring test on 3 succeeded in 20 usecs
[    0.691718] [drm] ring test on 4 succeeded in 8 usecs
[    0.691744] [drm] ring test on 5 succeeded in 8 usecs
[    0.691772] [drm] ring test on 6 succeeded in 9 usecs
[    0.691798] [drm] ring test on 7 succeeded in 8 usecs
[    0.691824] [drm] ring test on 8 succeeded in 8 usecs
[    0.691850] [drm] ring test on 9 succeeded in 8 usecs
[    0.691927] [drm] ring test on 10 succeeded in 5 usecs
[    0.691936] [drm] ring test on 11 succeeded in 5 usecs
[    0.718832] [drm] ring test on 12 succeeded in 1 usecs
[    0.718833] [drm] UVD initialized successfully.
[    0.819818] [drm] ring test on 13 succeeded in 5 usecs
[    0.819831] [drm] ring test on 14 succeeded in 3 usecs
[    0.819831] [drm] VCE initialized successfully.
[    0.977999] [drm] fb mappable at 0xE136F000
[    0.978000] [drm] vram apper at 0xE0000000
[    0.978000] [drm] size 8294400
[    0.978001] [drm] fb depth is 24
[    0.978001] [drm]    pitch is 7680
[    0.978260] fbcon: amdgpudrmfb (fb0) is primary device
[    1.286472] Console: switching to colour frame buffer device 240x67
[    1.290415] amdgpu 0000:26:00.0: fb0: amdgpudrmfb frame buffer device
[    1.290872] [drm] ib test on ring 1 succeeded
[    1.291031] [drm] ib test on ring 2 succeeded
[    1.291070] [drm] ib test on ring 3 succeeded
[    1.291109] [drm] ib test on ring 4 succeeded
[    1.291148] [drm] ib test on ring 5 succeeded
[    1.291186] [drm] ib test on ring 6 succeeded
[    1.291224] [drm] ib test on ring 7 succeeded
[    1.291264] [drm] ib test on ring 8 succeeded
[    1.291301] [drm] ib test on ring 9 succeeded
[    1.291331] [drm] ib test on ring 10 succeeded
[    1.291358] [drm] ib test on ring 11 succeeded
[    1.292229] [drm] ib test on ring 12 succeeded
[    1.292381] [drm] ib test on ring 13 succeeded
[    1.292692] [drm] Initialized amdgpu 3.10.0 20150101 for 0000:26:00.0 on mino                                 r 0
[    1.296358] brd: module loaded
[    1.296385] loop: module loaded
[    1.301903] usbcore: registered new interface driver rtsx_usb
[    1.301917] Loading iSCSI transport class v2.0-870.
[    1.302017] iscsi: registered transport (tcp)
[    1.302018] megasas: 07.701.17.00-rc1
[    1.302158] ahci 0000:03:00.1: version 3.0
[    1.302279] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    1.302312] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 im                                 pl SATA mode
[    1.302314] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp                                  pio slum part sxs deso sadm sds apst
[    1.302904] scsi host0: ahci
[    1.303025] scsi host1: ahci
[    1.303149] scsi host2: ahci
[    1.303274] scsi host3: ahci
[    1.303387] scsi host4: ahci
[    1.303476] scsi host5: ahci
[    1.303594] scsi host6: ahci
[    1.303696] scsi host7: ahci
[    1.303726] ata1: SATA max UDMA/133 abar m131072@0xfd180000 port 0xfd180100 i                                 rq 40
[    1.303727] ata2: SATA max UDMA/133 abar m131072@0xfd180000 port 0xfd180180 i                                 rq 40
[    1.303728] ata3: DUMMY
[    1.303728] ata4: DUMMY
[    1.303729] ata5: SATA max UDMA/133 abar m131072@0xfd180000 port 0xfd180300 i                                 rq 40
[    1.303731] ata6: SATA max UDMA/133 abar m131072@0xfd180000 port 0xfd180380 i                                 rq 40
[    1.303731] ata7: DUMMY
[    1.303732] ata8: DUMMY
[    1.303836] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 imp                                 l SATA mode
[    1.303838] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp                                  fbs pio slum part
[    1.304053] scsi host8: ahci
[    1.304083] ata9: SATA max UDMA/133 abar m4096@0xfd508000 port 0xfd508100 irq                                  42
[    1.304444] tun: Universal TUN/TAP device driver, 1.6
[    1.304501] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
[    1.304526] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    1.304542] Copyright (c) 2007 Atheros Corporation.
[    1.304626] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    1.304684] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[    1.304699] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.304700] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.304716] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.304717] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.304733] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.304733] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.304750] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    1.304750] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.304765] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5                                 .0.0-k
[    1.304766] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    1.304828] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    1.304828] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    1.304843] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    1.304871] sky2: driver version 1.30
[    1.304941] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.308542] r8169 0000:25:00.0 eth0: RTL8168g/8111g at 0xffffc9000313d000, 70                                 :85:c2:45:43:08, XID 0c000800 IRQ 43
[    1.308544] r8169 0000:25:00.0 eth0: jumbo features [frames: 9200 bytes, tx c                                 hecksumming: ko]
[    1.308657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.308657] ehci-pci: EHCI PCI platform driver
[    1.308673] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.308685] ohci-pci: OHCI PCI platform driver
[    1.308698] uhci_hcd: USB Universal Host Controller Interface driver
[    1.308797] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.308801] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus numbe                                 r 1
[    1.364161] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 qu                                 irks 0x08000410
[    1.364390] hub 1-0:1.0: USB hub found
[    1.364401] hub 1-0:1.0: 9 ports detected
[    1.364811] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.364813] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus numbe                                 r 2
[    1.364814] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.364839] usb usb2: We don't know the algorithms for LPM for this host, dis                                 abling LPM.
[    1.364932] hub 2-0:1.0: USB hub found
[    1.364938] hub 2-0:1.0: 3 ports detected
[    1.365142] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    1.365144] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus numbe                                 r 3
[    1.365246] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 qu                                 irks 0x00000410
[    1.365405] hub 3-0:1.0: USB hub found
[    1.365411] hub 3-0:1.0: 4 ports detected
[    1.365587] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    1.365589] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus numbe                                 r 4
[    1.365599] usb usb4: We don't know the algorithms for LPM for this host, dis                                 abling LPM.
[    1.365692] hub 4-0:1.0: USB hub found
[    1.365697] hub 4-0:1.0: 4 ports detected
[    1.365852] usbcore: registered new interface driver uas
[    1.365866] usbcore: registered new interface driver usb-storage
[    1.365882] i8042: PNP: No PS/2 controller found.
[    1.365922] mousedev: PS/2 mouse device common for all mice
[    1.366144] rtc_cmos 00:02: RTC can wake from S4
[    1.366354] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.366442] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpe                                 t irqs
[    1.366454] i2c /dev entries driver
[    1.366923] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revisio                                 n 0
[    1.366924] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port sele                                 ction
[    1.367190] sdhci: Secure Digital Host Controller Interface driver
[    1.367191] sdhci: Copyright(c) Pierre Ossman
[    1.367234] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.367235] No iBFT detected.
[    1.367244] hidraw: raw HID events driver (C) Jiri Kosina
[    1.367549] usbcore: registered new interface driver usbhid
[    1.367549] usbhid: USB HID core driver
[    1.367801] NET: Registered protocol family 10
[    1.368037] Segment Routing with IPv6
[    1.368047] NET: Registered protocol family 17
[    1.368061] Key type dns_resolver registered
[    1.368147] microcode: CPU0: patch_level=0x08001136
[    1.368158] microcode: CPU1: patch_level=0x08001136
[    1.368168] microcode: CPU2: patch_level=0x08001136
[    1.368178] microcode: CPU3: patch_level=0x08001136
[    1.368189] microcode: CPU4: patch_level=0x08001136
[    1.368199] microcode: CPU5: patch_level=0x08001136
[    1.368209] microcode: CPU6: patch_level=0x08001136
[    1.368218] microcode: CPU7: patch_level=0x08001136
[    1.368221] microcode: CPU8: patch_level=0x08001136
[    1.368230] microcode: CPU9: patch_level=0x08001136
[    1.368239] microcode: CPU10: patch_level=0x08001136
[    1.368248] microcode: CPU11: patch_level=0x08001136
[    1.368280] microcode: Microcode Update Driver: v2.2.
[    1.368709] Btrfs loaded, crc32c=crc32c-generic
[    1.369154] console [netcon0] enabled
[    1.369154] netconsole: network logging started

Nathanking · 11 August 2018 09:46

[    1.369246] rtc_cmos 00:02: setting system clock to 2018-08-10 22:04:07 UTC (                                 1533938647)
[    1.369325] acpi_cpufreq: overriding BIOS provided _PSD data
[    1.369853] ALSA device list:
[    1.369854]   No soundcards found.
[    1.568665] tsc: Refined TSC clocksource calibration: 3193.999 MHz
[    1.568672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a24cf                                 65f, max_idle_ns: 440795271781 ns
[    1.618271] ata1: SATA link down (SStatus 0 SControl 300)
[    1.618275] ata9: SATA link down (SStatus 0 SControl 300)
[    1.680932] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.732930] usb 1-4: new low-speed USB device number 2 using xhci_hcd
[    1.846186] hub 3-3:1.0: USB hub found
[    1.846916] hub 3-3:1.0: 4 ports detected
[    1.928105] ata2: SATA link down (SStatus 0 SControl 300)
[    1.941096] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
[    1.958276] hub 4-3:1.0: USB hub found
[    1.958767] hub 4-3:1.0: 4 ports detected
[    2.041502] input: Lite-On Technology Corp HP USB Multimedia Keyboard as /dev                                 ices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-4/1-4:1.0/0003:04CA:008E.0001/i                                 nput/input2
[    2.062950] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.093136] hid-generic 0003:04CA:008E.0001: input,hidraw0: USB HID v1.10 Key                                 board [Lite-On Technology Corp HP USB Multimedia Keyboard] on usb-0000:03:00.0-4                                 /input0
[    2.112164] input: Lite-On Technology Corp HP USB Multimedia Keyboard as /dev                                 ices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-4/1-4:1.1/0003:04CA:008E.0002/i                                 nput/input3
[    2.163776] hid-generic 0003:04CA:008E.0002: input,hidraw1: USB HID v1.10 Dev                                 ice [Lite-On Technology Corp HP USB Multimedia Keyboard] on usb-0000:03:00.0-4/i                                 nput1
[    2.239104] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.1/                                 0000:27:00.3/usb3/3-4/3-4:1.0/0003:046D:C537.0003/input/input4
[    2.239265] hid-generic 0003:046D:C537.0003: input,hidraw2: USB HID v1.11 Mou                                 se [Logitech USB Receiver] on usb-0000:27:00.3-4/input0
[    2.251070] usb 4-3.4: new SuperSpeed USB device number 3 using xhci_hcd
[    2.266934] usb-storage 4-3.4:1.0: USB Mass Storage device detected
[    2.267113] scsi host9: usb-storage 4-3.4:1.0
[    2.283975] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.1/                                 0000:27:00.3/usb3/3-4/3-4:1.1/0003:046D:C537.0004/input/input5
[    2.319961] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    2.337263] hid-generic 0003:046D:C537.0004: input,hiddev0,hidraw3: USB HID v                                 1.11 Keyboard [Logitech USB Receiver] on usb-0000:27:00.3-4/input1
[    2.401153] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.404199] ata5.00: ATA-9: LITEON L8H-256V2G-11 M.2 2280 256GB, F88110B, max                                  UDMA/133
[    2.404200] ata5.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[    2.404788] ata5.00: configured for UDMA/133
[    2.404988] scsi 4:0:0:0: Direct-Access     ATA      LITEON L8H-256V2 10B  PQ                                 : 0 ANSI: 5
[    2.405176] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    2.405225] sd 4:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238                                  GiB)
[    2.405241] sd 4:0:0:0: [sda] Write Protect is off
[    2.405243] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.405282] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                 n't support DPO or FUA
[    2.406612]  sda: sda1 sda2 sda3 sda4
[    2.406949] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.593288] clocksource: Switched to clocksource tsc
[    2.712401] ata6: SATA link down (SStatus 0 SControl 300)
[    2.714158] Freeing unused kernel memory: 3460K
[    2.714160] Write protecting the kernel read-only data: 40960k
[    2.714901] Freeing unused kernel memory: 1540K
[    2.717184] Freeing unused kernel memory: 1332K
[    3.297644] scsi 9:0:0:0: Direct-Access     Lexar    USB Flash Drive  PMAP PQ                                 : 0 ANSI: 6
[    3.297883] sd 9:0:0:0: Attached scsi generic sg1 type 0
[    3.298028] sd 9:0:0:0: [sdb] 125173760 512-byte logical blocks: (64.1 GB/59.                                 7 GiB)
[    3.298483] sd 9:0:0:0: [sdb] Write Protect is off
[    3.298484] sd 9:0:0:0: [sdb] Mode Sense: 2b 00 00 08
[    3.298919] sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doe                                 sn't support DPO or FUA
[    3.304497]  sdb: sdb1 sdb2
[    3.305857] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[    3.849638] EXT4-fs (sdb2): couldn't mount as ext3 due to feature incompatibi                                 lities
[    3.850144] EXT4-fs (sdb2): couldn't mount as ext2 due to feature incompatibi                                 lities
[    4.152775] EXT4-fs (sdb2): recovery complete
[    4.156642] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:                                  (null)
[    5.884091] ### BIG FAT WARNING
[    5.884099] ### sdb2 is removable. suspend/resume may not work
[    5.884812] ### BIG FAT WARNING
[    5.884819] ### sdb1 is removable. suspend/resume may not work
[    5.942496] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SEL                                 INUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -                                 XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    5.942722] systemd[1]: Detected architecture x86-64.
[    5.942843] systemd[1]: Set hostname to <Lakka>.
[    5.956945] systemd[1]: Started Forward Password Requests to Wall Directory W                                 atch.
[    5.956984] systemd[1]: Started Dispatch Password Requests to Console Directo                                 ry Watch.
[    5.957010] systemd[1]: Listening on udev Control Socket.
[    5.957038] systemd[1]: Listening on Journal Socket.
[    5.965302] systemd[1]: Created slice System Slice.
[    5.965597] systemd[1]: Starting Setup machine-id...
[    5.966036] systemd[1]: Starting Create list of required static device nodes                                  for the current kernel...
[    5.972694] applespi: loading out-of-tree module taints kernel.
[    6.046175] systemd-journald[390]: Received request to flush runtime journal                                  from PID 1
[    6.444442] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[    6.444445] snd_hda_intel 0000:26:00.1: Force to non-snoop mode
[    6.536887] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:                                 03.1/0000:26:00.1/sound/card0/input6
[    6.545545] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:                                 03.1/0000:26:00.1/sound/card0/input7
[    6.555394] r8169 0000:25:00.0 eth0: link down
[    6.555448] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.555739] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:                                 03.1/0000:26:00.1/sound/card0/input8
[    6.556534] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_ou                                 ts=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    6.556536] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0                                 /0x0/0x0)
[    6.556538] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0                                 /0x0)
[    6.556539] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    6.556540] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    6.556542] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    6.556543] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    6.556545] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    6.565874] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:01.                                 3/0000:03:00.0/usb1/1-6/1-6:1.0/input/input12
[    6.566086] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:                                 03.1/0000:26:00.1/sound/card0/input9
[    6.574193] usbcore: registered new interface driver xpad
[    6.582991] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00                                 :03.1/0000:26:00.1/sound/card0/input10
[    6.593192] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00                                 :03.1/0000:26:00.1/sound/card0/input11
[    6.607510] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:                                 08.1/0000:28:00.3/sound/card1/input13
[    6.617825] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:0                                 8.1/0000:28:00.3/sound/card1/input14
[    6.627106] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/                                 0000:28:00.3/sound/card1/input15
[    6.636542] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:0                                 8.1/0000:28:00.3/sound/card1/input16
[    6.645963] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/00                                 00:00:08.1/0000:28:00.3/sound/card1/input17
[    6.686963] wl: module license 'MIXED/Proprietary' taints kernel.
[    6.686966] Disabling lock debugging due to kernel taint
[    6.737822] wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.22                                 3.271 (r587334)
[    6.737824]
[    6.976156] FAT-fs (sda2): Volume was not properly unmounted. Some data may b                                 e corrupt. Please run fsck.
[    6.993945] fuse init (API version 7.26)

Nathanking · 10 August 2018 22:48

I tested the audio on another PC also running an RX 580 hooked up to a different receiver and still no audio. I want to try hooking the PC up directly to a TV to eliminate variables, but I can’t do that right now because after about 5 minutes of testing I can no longer cycle through the audio drivers, the setting is just frozen on whatever was there last. I’ve seen this mentioned as a bug before but I read it was fixed, do you have a solution to that? Otherwise I have to make a new USB.

Nathanking · 11 August 2018 12:39

OK, I tested the system plugged in to a standard 1080p TV using HDMI with nothing in between, and again, cycling through the drivers (resetting the game after each change) did nothing. No audio using an RX 580. I updated the video and sound drivers for the GPU and motherboard, and still no change.

I figured out a workaround for now though. I plugged in a 3.5mm cable to the AUX jack on the receiver coming from the speaker port on the motherboard itself, and I now have sound. If we’re trying to diagnose the issue, remember the GTX 770 I used before this was working fine using HDMI audio. I confirmed audio over HDMI was fine in Windows 10, and now I know I can get sound using my motherboard audio. That tells me there’s something funky going on with the RX 580 and Lakka.

All that being said, I would still like help getting audio over HDMI to work, so if you have any more suggestions please let me know!

EDIT: I also figured out a workaround for the audio driver selection menu freezing and not letting you cycle through them. Press “start” or “enter” to clear the selected driver, shutdown the computer, switch the USB drive to another USB port, enter the OS again, and the issue is fixed. Perhaps this is just an issue with the live USB version of Lakka?

gouchi · 11 August 2018 14:20

Can you try to do it manually to see if it is working ? Check for each audio device

systemctl stop retroarch
sed -i '/audio_device/s/".*"/"hdmi:CARD=HDMI,DEV=0"/' /storage/.config/retroarch/retroarch.cfg
retroarch --menu --verbose >> log.txt 2>&1
systemctl stop retroarch
sed -i '/audio_device/s/".*"/"hdmi:CARD=HDMI,DEV=1"/' /storage/.config/retroarch/retroarch.cfg
retroarch --menu --verbose >> log.txt 2>&1
systemctl stop retroarch
sed -i '/audio_device/s/".*"/"hdmi:CARD=HDMI,DEV=2"/' /storage/.config/retroarch/retroarch.cfg
retroarch --menu --verbose >> log.txt 2>&1
systemctl stop retroarch
sed -i '/audio_device/s/".*"/"hdmi:CARD=HDMI,DEV=3"/' /storage/.config/retroarch/retroarch.cfg
retroarch --menu --verbose >> log.txt 2>&1
systemctl stop retroarch
sed -i '/audio_device/s/".*"/"hdmi:CARD=HDMI,DEV=4"/' /storage/.config/retroarch/retroarch.cfg
retroarch --menu --verbose >> log.txt 2>&1
systemctl stop retroarch
sed -i '/audio_device/s/".*"/"hdmi:CARD=HDMI,DEV=5"/' /storage/.config/retroarch/retroarch.cfg
retroarch --menu --verbose >> log.txt 2>&1

Then provide the file log.txt

Thank you.

Nathanking · 11 August 2018 14:20

Ok, I’m pretty sure I did this right:

[INFO] RetroArch 1.7.3 (Git 2a2e732)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES 
Built: Jun 23 2018
[INFO] Version: 1.7.3
[INFO] Git: 2a2e732
[INFO] =================================================
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 5 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: yes
[INFO] [DRM]: Connector 3 has 25 modes.
[INFO] [DRM]: Connector 3 assigned to monitor index: #1.
[INFO] [DRM]: Connector 4 connected: no
[INFO] [DRM]: Connector 4 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 12: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 15: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 16: (1360x768) 1360 x 768, 60 Hz
[INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 21: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7f7f4c07e1b0.
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD POLARIS10 (DRM 3.10.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ... 
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ... 
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event2).
[INFO] [udev]: Keyboard #1 (/dev/input/event5).
[INFO] [udev]: Mouse #0 (/dev/input/event4).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports 16 force feedback effects.
[INFO] [Autoconf]: 208 profiles found.
[INFO] [autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: null
[INFO] Found shader "/tmp/shaders/bilinear.glslp"
[INFO] Found shader "/tmp/shaders/nearest.glslp"
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 1024 frames
[INFO] ALSA: Buffer size: 2048 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [LED]: LED driver = 'null' 0x76a0c0
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [Config]: Saved new config to "/storage/.config/retroarch/retroarch.cfg".
[INFO] Threaded video stats: Frames pushed: 19647, Frames dropped: 0.
[INFO] RetroArch 1.7.3 (Git 2a2e732)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES 
Built: Jun 23 2018
[INFO] Version: 1.7.3
[INFO] Git: 2a2e732
[INFO] =================================================
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 5 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: yes
[INFO] [DRM]: Connector 3 has 25 modes.
[INFO] [DRM]: Connector 3 assigned to monitor index: #1.
[INFO] [DRM]: Connector 4 connected: no
[INFO] [DRM]: Connector 4 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 12: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 15: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 16: (1360x768) 1360 x 768, 60 Hz
[INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 21: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7fe8cc07e1c0.
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD POLARIS10 (DRM 3.10.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ... 
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ... 
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event2).
[INFO] [udev]: Keyboard #1 (/dev/input/event5).
[INFO] [udev]: Mouse #0 (/dev/input/event4).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports 16 force feedback effects.
[INFO] [Autoconf]: 208 profiles found.
[INFO] [autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: null
[INFO] Found shader "/tmp/shaders/bilinear.glslp"
[INFO] Found shader "/tmp/shaders/nearest.glslp"
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [LED]: LED driver = 'null' 0x76a0c0
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] RetroArch 1.7.3 (Git 2a2e732)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES 
Built: Jun 23 2018
[INFO] Version: 1.7.3
[INFO] Git: 2a2e732
[INFO] =================================================
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 5 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: yes
[INFO] [DRM]: Connector 3 has 25 modes.
[INFO] [DRM]: Connector 3 assigned to monitor index: #1.
[INFO] [DRM]: Connector 4 connected: no
[INFO] [DRM]: Connector 4 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 12: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 15: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 16: (1360x768) 1360 x 768, 60 Hz
[INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 21: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7f679807e1b0.
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD POLARIS10 (DRM 3.10.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ... 
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ... 
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event2).
[INFO] [udev]: Keyboard #1 (/dev/input/event5).
[INFO] [udev]: Mouse #0 (/dev/input/event4).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports 16 force feedback effects.
[INFO] [Autoconf]: 208 profiles found.
[INFO] [autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: null
[INFO] Found shader "/tmp/shaders/bilinear.glslp"
[INFO] Found shader "/tmp/shaders/nearest.glslp"
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [LED]: LED driver = 'null' 0x76a0c0
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] RetroArch 1.7.3 (Git 2a2e732)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES 
Built: Jun 23 2018
[INFO] Version: 1.7.3
[INFO] Git: 2a2e732
[INFO] =================================================
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 5 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: yes
[INFO] [DRM]: Connector 3 has 25 modes.
[INFO] [DRM]: Connector 3 assigned to monitor index: #1.
[INFO] [DRM]: Connector 4 connected: no
[INFO] [DRM]: Connector 4 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 12: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 15: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 16: (1360x768) 1360 x 768, 60 Hz
[INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 21: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7f62b007fea0.
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD POLARIS10 (DRM 3.10.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ... 
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ... 
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event2).
[INFO] [udev]: Keyboard #1 (/dev/input/event5).
[INFO] [udev]: Mouse #0 (/dev/input/event4).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports 16 force feedback effects.
[INFO] [Autoconf]: 208 profiles found.
[INFO] [autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: null
[INFO] Found shader "/tmp/shaders/bilinear.glslp"
[INFO] Found shader "/tmp/shaders/nearest.glslp"
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [LED]: LED driver = 'null' 0x76a0c0
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] RetroArch 1.7.3 (Git 2a2e732)

Nathanking · 11 August 2018 14:21

[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES 
Built: Jun 23 2018
[INFO] Version: 1.7.3
[INFO] Git: 2a2e732
[INFO] =================================================
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 5 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: yes
[INFO] [DRM]: Connector 3 has 25 modes.
[INFO] [DRM]: Connector 3 assigned to monitor index: #1.
[INFO] [DRM]: Connector 4 connected: no
[INFO] [DRM]: Connector 4 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 12: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 15: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 16: (1360x768) 1360 x 768, 60 Hz
[INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 21: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7ffb5807e1c0.
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD POLARIS10 (DRM 3.10.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ... 
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ... 
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event2).
[INFO] [udev]: Keyboard #1 (/dev/input/event5).
[INFO] [udev]: Mouse #0 (/dev/input/event4).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports 16 force feedback effects.
[INFO] [Autoconf]: 208 profiles found.
[INFO] [autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: null
[INFO] Found shader "/tmp/shaders/bilinear.glslp"
[INFO] Found shader "/tmp/shaders/nearest.glslp"
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [LED]: LED driver = 'null' 0x76a0c0
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] RetroArch 1.7.3 (Git 2a2e732)
[INFO] === Build =======================================
Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES 
Built: Jun 23 2018
[INFO] Version: 1.7.3
[INFO] Git: 2a2e732
[INFO] =================================================
[INFO] Environ SET_PIXEL_FORMAT: RGB565.
[INFO] Redirecting save file to "/storage/savefiles/.srm".
[INFO] Redirecting savestate to "/storage/savestates/.state".
[INFO] Version of libretro API: 1
[INFO] Compiled against API: 1
[INFO] [Audio]: Set audio input rate to: 29970.03 Hz.
[INFO] [Video]: Video @ fullscreen
[INFO] [Video]: Starting threaded video driver ...
[INFO] [DRM]: Found 5 connectors.
[INFO] [DRM]: Connector 0 connected: no
[INFO] [DRM]: Connector 0 has 0 modes.
[INFO] [DRM]: Connector 1 connected: no
[INFO] [DRM]: Connector 1 has 0 modes.
[INFO] [DRM]: Connector 2 connected: no
[INFO] [DRM]: Connector 2 has 0 modes.
[INFO] [DRM]: Connector 3 connected: yes
[INFO] [DRM]: Connector 3 has 25 modes.
[INFO] [DRM]: Connector 3 assigned to monitor index: #1.
[INFO] [DRM]: Connector 4 connected: no
[INFO] [DRM]: Connector 4 has 0 modes.
[INFO] [DRM]: Mode 0: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 1: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 2: (4096x2160) 4096 x 2160, 24 Hz
[INFO] [DRM]: Mode 3: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 4: (3840x2160) 3840 x 2160, 30 Hz
[INFO] [DRM]: Mode 5: (3840x2160) 3840 x 2160, 25 Hz
[INFO] [DRM]: Mode 6: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 7: (3840x2160) 3840 x 2160, 24 Hz
[INFO] [DRM]: Mode 8: (1920x1080) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 9: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 10: (1920x1080i) 1920 x 1080, 60 Hz
[INFO] [DRM]: Mode 11: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 12: (1920x1080) 1920 x 1080, 30 Hz
[INFO] [DRM]: Mode 13: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 14: (1920x1080) 1920 x 1080, 24 Hz
[INFO] [DRM]: Mode 15: (1280x1024) 1280 x 1024, 60 Hz
[INFO] [DRM]: Mode 16: (1360x768) 1360 x 768, 60 Hz
[INFO] [DRM]: Mode 17: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 18: (1280x720) 1280 x 720, 60 Hz
[INFO] [DRM]: Mode 19: (1024x768) 1024 x 768, 60 Hz
[INFO] [DRM]: Mode 20: (800x600) 800 x 600, 60 Hz
[INFO] [DRM]: Mode 21: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 22: (720x480) 720 x 480, 60 Hz
[INFO] [DRM]: Mode 23: (640x480) 640 x 480, 60 Hz
[INFO] [DRM]: Mode 24: (640x480) 640 x 480, 60 Hz
[INFO] [GL]: Found GL context: kms
[INFO] [GL]: Detecting screen resolution 1920x1080.
[INFO] [EGL] Found EGL_EXT_platform_base, trying eglGetPlatformDisplayEXT
[INFO] [EGL]: EGL version: 1.4
[INFO] [EGL]: Current context: 0x7f086007e1d0.
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [GL]: Vendor: X.Org, Renderer: Gallium 0.4 on AMD POLARIS10 (DRM 3.10.0 / 4.11.12-rt14, LLVM 3.9.0).
[INFO] [GL]: Version: 3.0 Mesa 17.1.3.
[INFO] [GL]: Using resolution 1920x1080
[INFO] [GL]: Default shader backend found: glsl.
[INFO] [Shader driver]: Using GLSL shader backend.
[INFO] [GLSL]: Checking GLSL shader support ...
[WARN] [GL]: Stock GLSL shaders will be used.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Setting up menu pipeline shaders for XMB ... 
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] [GLSL]: Found GLSL vertex shader.
[INFO] [GLSL]: Found GLSL fragment shader.
[INFO] [GLSL]: Linking GLSL program.
[INFO] Resetting shader to defaults ... 
[INFO] [GL]: Using 4 textures.
[INFO] [GL]: Loaded 1 program(s).
[INFO] [GL]: Using GL_RGB565 for texture uploads.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Video]: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
[INFO] [udev]: Keyboard #0 (/dev/input/event2).
[INFO] [udev]: Keyboard #1 (/dev/input/event5).
[INFO] [udev]: Mouse #0 (/dev/input/event4).
[INFO] [udev]: Mouse #1 (/dev/input/mouse0).
[INFO] [udev]: Plugged pad: Microsoft X-Box 360 pad (1118:654) on port #0.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports force feedback.
[INFO] [udev]: Pad #0 (/dev/input/event6) supports 16 force feedback effects.
[INFO] [Autoconf]: 208 profiles found.
[INFO] [autoconf]: selected configuration: /tmp/joypads/udev/Microsoft_X-Box_360_pad.cfg
[INFO] [Joypad]: Found joypad driver: "udev".
[INFO] [Video]: Found display server: null
[INFO] Found shader "/tmp/shaders/bilinear.glslp"
[INFO] Found shader "/tmp/shaders/nearest.glslp"
[INFO] Found shader "/tmp/shaders/slang-conversion-template.glsl"
[INFO] Found shader "/tmp/shaders/stock.glsl"
[INFO] ALSA: Using signed 16-bit format.
[INFO] ALSA: Period size: 384 frames
[INFO] ALSA: Buffer size: 1536 frames
[INFO] [Menu]: Found menu display driver: "menu_display_gl".
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [Font]: Using font rendering backend: freetype.
[INFO] [LED]: LED driver = 'null' 0x76a0c0
[INFO] [MIDI]: Initializing ...
[INFO] [MIDI]: Input disabled.
[INFO] [MIDI]: Output disabled.
[INFO] [MIDI]: Initialized "null" driver.
[INFO] SRAM will not be saved.
[INFO] Loading history file: [/storage/.config/retroarch/content_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_favorites.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
[INFO] Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).
[INFO] [KMS]: New FB: 1920x1080 (stride: 8192).

gouchi · 11 August 2018 14:36

Thank you. There is no error related to the audio.

Can you try we our nightly builds and also experimental build from LibreElec master ?

Thank you for your tests.

Nathanking · 12 August 2018 08:33

I’ve tried to install the latest versions of both the nightly build and the experimental build, but for some reason when I get to the first command screen that allows you to choose between “live” and “installation”, no matter which choice I make, my computer just resets without the install taking place. I will continue to test this and hopefully I’ll get it working.

For the record, I’m using an ISO labeled Lakka-Generic.x86_64-3.0-devel-20180703104709-2fb13c2 to create a USB using both Win32DiskImager and Rufus 3.1 (to make sure it’s not just one of the programs functioning incorrectly).

gouchi · 14 August 2018 13:25

Can you try to boot in live mode with live ssh tty retroarch=0 and get some dmesg output and lakka system log using the experimental build ?

Thank you.

gouchi · 14 August 2018 19:42

Hi,

If I am correct, you card is from Polaris 10 family so we will have to use at least kernel 4.15 to make audio hdmi to work.

So you should make a test with the experimental build definitely.

Nathanking · 15 August 2018 05:27

I’ll try and test the Experimental Build sometimes tomorrow. Which version do you suggest I use for a Generic 64-bit PC? The newest builds don’t seem to include the x86-64 version.

EDIT: NVMD, looks like the one I’ve been trying to use is indeed the latest one.

Nathanking · 15 August 2018 06:56

Perhaps I’m just not tech-savvy enough for this, but I’m about at my breaking point here. I can’t even get an experimental build to install for some reason. Correct me if I’m wrong in any of these installation steps:

Downloaded 2.1.1 for Generic 64-bit PC
Use Win32DiskImager/Rufus to create bootable USB using the 2.1.1 image
Boot from USB at start up
Wait for installation to finish creating a live version of Lakka on the USB
Once PC resets, boot from USB again and Lakka will start after a delayed first time startup

This process works just fine for the official 2.1.1 image, but when I try the exact same process for the experimental build labeled “Lakka-Generic.x86_64-3.0-devel-20180703104709-2fb13c2”, at step 4 when you’re on the command line screen waiting for it to begin installation, my computer just resets. No matter what I put in, I just get a reset. I can’t get the build to install on to the USB or a drive in my computer. I’m sure I’m doing something wrong, as I’ve seen no one else having this issue.

EDIT: Ok, something new happened. I tried installing an older experimental build, and while it still would not install, it got the flower logo and then a message saying “Couldn’t find an input interrupt endpoint”, and then it goes to a black screen and just sits there until I manually reset the PC.

Nathanking · 17 August 2018 09:49

I’ve yet to figure this issue out. It sounds like the RX 580 just isn’t completely supported by Lakka at the moment. Issue is still present in stable 2.1.1. I’ve not been successful in creating an Experimental boot device for some reason, so I can’t test if the RX 580 audio is working there.

I have audio working using a 3.5mm jack to the AUX port on my receiver, and I’m just gonna stick with that until the RX 580 is supported in a stable Lakka release. For now I’ll consider this issue settled.

EC_Estal · 17 August 2018 13:17

With a GTX 770 Hooked into HDMI I had the same issue. Somehow my audio was routed through channel 1 instead of 0, so have you tried changing your channel by chance?

Nathanking · 17 August 2018 23:02

I had to do the same for my GTX 770. Switched from 0 to 1 and it worked fine. The issue is my new RX 580. None of the channels work. I’ve tried them all.