Lakka and old Core Duo iMac

[fnard]

I have just dl’d Lakka, 32 bit, and tried to install on my old (ok, maybe ancient) Core Duo iMac. Installation seemed to go well, but now it certainly seems that that wasn’t the case. Upon booting, I have a blue garbled screen with some white smattered in. Looks to be some sort of menu screen, the only reason I say this is because if I press the arrow keys you can see movement or swipes in that direction. First, and more importantly, is this computer compatible with lakka or am I just pissing in the wind? Secondly, has anyone experienced this and able to offer some advice/help? It would be greatly appreciated.

tl;dr look at pict above and tell me what i did wrong on old core duo imac

[hunterk]

That looks like the monitor is receiving an incompatible sync signal. I don’t know how to modify that in Lakka but I think there are some boot options you can change to be more compatible.

[fnard]

That looks like the monitor is receiving an incompatible sync signal. I don’t know how to modify that in Lakka but I think there are some boot options you can change to be more compatible.

Thanks. That’s pretty much along the lines I was thinking. This is my first run at Lakka, so been trying to cram in some reading when I’ve got the time. Would have to assume that I’ll need to connect to the machine via SSH to make any changes. Will try to give it a run tommorow if time permits.

[gouchi]

Yes, please try to provide some logs.

Thank you.

[fnard]

[QUOTE=gouchi;50963]Yes, please try to provide some logs.

Thank you.[/QUOTE]

Ok, got some time to mess around a lil more. The logs follow. Hopefully it’ll help.

[fnard]

System Log: Lakka:~ # systemctl stop retroarch.service ; retroarch -v RetroArch [INFO] :: === Build ======================================= Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 Built: Sep 27 2016 RetroArch [INFO] :: Version: 1.3.6 RetroArch [INFO] :: Git: 03241bf RetroArch [INFO] :: ================================================= RetroArch [INFO] :: Looking for config in: “/storage/.config/retroarch/retroarch.cfg”. RetroArch [INFO] :: Config: loading config from: /storage/.config/retroarch/retroarch.cfg. RetroArch [INFO] :: Resetting undo buffers. RetroArch [INFO] :: Environ SET_PIXEL_FORMAT: RGB565. RetroArch [INFO] :: Version of libretro API: 1 RetroArch [INFO] :: Compiled against API: 1 RetroArch [INFO] :: Set audio input rate to: 29970.03 Hz. RetroArch [INFO] :: Found shader “/usr/share/common-shaders/bilinear.glslp” RetroArch [INFO] :: Found shader “/usr/share/common-shaders/nearest.glslp” RetroArch [INFO] :: Found shader “/usr/share/common-shaders/stock.glsl” RetroArch [INFO] :: Video @ 960x720 RetroArch [INFO] :: Starting threaded video driver … RetroArch [INFO] :: [DRM]: Found 3 connectors. RetroArch [INFO] :: [DRM]: Connector 0 connected: yes RetroArch [INFO] :: [DRM]: Connector 0 has 14 modes. RetroArch [INFO] :: [DRM]: Connector 0 assigned to monitor index: #1. RetroArch [INFO] :: [DRM]: Connector 1 connected: no RetroArch [INFO] :: [DRM]: Connector 1 has 0 modes. RetroArch [INFO] :: [DRM]: Connector 2 connected: no RetroArch [INFO] :: [DRM]: Connector 2 has 0 modes. RetroArch [INFO] :: [DRM]: Mode 0: (1680x1050) 1680 x 1050, 60 Hz RetroArch [INFO] :: [DRM]: Mode 1: (1400x1050) 1400 x 1050, 60 Hz RetroArch [INFO] :: [DRM]: Mode 2: (1280x1024) 1280 x 1024, 60 Hz RetroArch [INFO] :: [DRM]: Mode 3: (1440x900) 1440 x 900, 60 Hz RetroArch [INFO] :: [DRM]: Mode 4: (1280x960) 1280 x 960, 60 Hz RetroArch [INFO] :: [DRM]: Mode 5: (1280x854) 1280 x 854, 60 Hz RetroArch [INFO] :: [DRM]: Mode 6: (1280x800) 1280 x 800, 60 Hz RetroArch [INFO] :: [DRM]: Mode 7: (1280x720) 1280 x 720, 60 Hz RetroArch [INFO] :: [DRM]: Mode 8: (1152x768) 1152 x 768, 60 Hz RetroArch [INFO] :: [DRM]: Mode 9: (1024x768) 1024 x 768, 60 Hz RetroArch [INFO] :: [DRM]: Mode 10: (800x600) 800 x 600, 60 Hz RetroArch [INFO] :: [DRM]: Mode 11: (848x480) 848 x 480, 60 Hz RetroArch [INFO] :: [DRM]: Mode 12: (720x480) 720 x 480, 60 Hz RetroArch [INFO] :: [DRM]: Mode 13: (640x480) 640 x 480, 59 Hz RetroArch [INFO] :: Found GL context: kms RetroArch [INFO] :: Detecting screen resolution 1680x1050. RetroArch [INFO] :: [EGL]: EGL version: 1.4 RetroArch [INFO] :: [EGL]: Current context: 0xb4909f98. RetroArch [INFO] :: [KMS]: New FB: 1680x1050 (stride: 6720). RetroArch [INFO] :: [GL]: Vendor: X.Org R300 Project, Renderer: Gallium 0.4 on ATI RV530. RetroArch [INFO] :: [GL]: Version: 2.1 Mesa 11.2.0-rc1. RetroArch [INFO] :: GL: Using resolution 1680x1050 RetroArch [INFO] :: [GL]: Default shader backend found: glsl. RetroArch [INFO] :: [Shader driver]: Using GLSL shader backend. RetroArch [INFO] :: Checking GLSL shader support … RetroArch [WARN] :: [GL]: Stock GLSL shaders will be used. RetroArch [INFO] :: Found GLSL vertex shader. RetroArch [INFO] :: Found GLSL fragment shader. RetroArch [INFO] :: Linking GLSL program. RetroArch [INFO] :: Found GLSL vertex shader. RetroArch [INFO] :: Found GLSL fragment shader. RetroArch [INFO] :: Linking GLSL program. RetroArch [INFO] :: Found GLSL vertex shader. RetroArch [INFO] :: Found GLSL fragment shader. RetroArch [INFO] :: Linking GLSL program. RetroArch [INFO] :: Found GLSL vertex shader. RetroArch [INFO] :: Found GLSL fragment shader. RetroArch [INFO] :: Linking GLSL program. RetroArch [INFO] :: Found GLSL vertex shader. RetroArch [INFO] :: Found GLSL fragment shader. RetroArch [INFO] :: Linking GLSL program. RetroArch [INFO] :: [GL]: Using 4 textures. RetroArch [INFO] :: [GL]: Loaded 1 program(s). RetroArch [INFO] :: Using font rendering backend: freetype. RetroArch [INFO] :: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver. RetroArch [WARN] :: [udev]: Couldn’t open any keyboard, mouse or touchpad. Are permissions set correctly for /dev/input/event*? RetroArch [INFO] :: Found joypad driver: “udev”. RetroArch [INFO] :: ALSA: Using signed 16-bit format. RetroArch [INFO] :: ALSA: Period size: 1024 frames RetroArch [INFO] :: ALSA: Buffer size: 2048 frames RetroArch [INFO] :: Found menu display driver: “menu_display_gl”. RetroArch [INFO] :: Using font rendering backend: freetype. RetroArch [INFO] :: Using font rendering backend: freetype. RetroArch [INFO] :: SRAM will not be saved. RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_history.lpl]. RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_music_history.lpl]. RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_video_history.lpl]. RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_image_history.lpl]. RetroArch [INFO] :: [KMS]: New FB: 1680x1050 (stride: 6720). RetroArch [INFO] :: [KMS]: New FB: 1680x1050 (stride: 6720). RetroArch [INFO] :: [KMS]: Missed 2 VBlank(s) (Frame: 11, DRM frame: 71240). RetroArch [INFO] :: [KMS]: Missed 1 VBlank(s) (Frame: 91, DRM frame: 71320). RetroArch [INFO] :: [KMS]: Missed 1 VBlank(s) (Frame: 124, DRM frame: 71353). RetroArch [INFO] :: [KMS]: Missed 1 VBlank(s) (Frame: 1057, DRM frame: 72286). RetroArch [INFO] :: [KMS]: Missed 1 VBlank(s) (Frame: 1067, DRM frame: 72296). RetroArch [INFO] :: [KMS]: Missed 1 VBlank(s) (Frame: 1133, DRM frame: 72362). RetroArch [INFO] :: [KMS]: Missed 1 VBlank(s) (Frame: 1364, DRM frame: 72593). RetroArch [INFO] :: [KMS]:… etc etc etc

[fnard]

Graphic Card Logs: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV530/M56-P [Mobility Radeon X1600] [1002:71c5] Subsystem: Apple Inc. RV530/M56-P [Mobility Radeon X1600] (MacBook Pro) [106b:0080] Kernel driver in use: radeon 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22) [FONT=arial] dmesg Log: [/FONT]Lakka:~ # dmesg [ 0.000000] Linux version 4.6.3-rt8 (kivutar@gcc20) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT RT Tue Sep 13 22:52:09 CEST 2016 [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using ‘eager’ FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ede00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f0c9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f0ca000-0x000000007f2cafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f2cb000-0x000000007febefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007febf000-0x000000007feeefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007feef000-0x000000007fefffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Apple Computer, Inc. iMac4,1/Mac-F42787C8, BIOS IM41.88Z.0055.B08.0610121350 10/12/06 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f0ca max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x033fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x02eae000, 0x02eaefff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 APPLE ) [ 0.000000] ACPI: XSDT 0x000000007FEFD120 000074 (v01 APPLE Apple00 00000055 01000013) [ 0.000000] ACPI: FACP 0x000000007FEFB000 0000F4 (v03 APPLE Apple00 00000055 Loki 0000005F) [ 0.000000] ACPI: DSDT 0x000000007FEF1000 003D19 (v01 APPLE iMac 00040001 INTL 20050309) [ 0.000000] ACPI: FACS 0x000000007FEC1000 000040 [ 0.000000] ACPI: FACS 0x000000007FEC1000 000040 [ 0.000000] ACPI: HPET 0x000000007FEFA000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 0x000000007FEF9000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: MCFG 0x000000007FEF8000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ASF! 0x000000007FEF7000 00009C (v32 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SBST 0x000000007FEF6000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ECDT 0x000000007FEF5000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 0x000000007FEBD000 00064F (v01 APPLE SataPri 00001000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007FEBC000 00069C (v01 APPLE SataSec 00001000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007FEF0000 0004DC (v01 APPLE CpuPm 00003000 INTL 20050309) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1144MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x02eaf000, 0x02eaffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f0c9fff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f0c9fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f0c9fff] [ 0.000000] On node 0 totalpages: 520296 [ 0.000000] free_area_init_node: node 0, pgdat c2c22080, node_mem_map f6816020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 293068 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 18 pages/cpu @f67d7000 s43872 r0 d29856 u73728 [ 0.000000] pcpu-alloc: s43872 r0 d29856 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518520 [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage ssh quiet vt.global_cursor_default=0 loglevel=2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f0ca) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2031836K/2081184K available (10199K kernel code, 593K rwdata, 18040K rodata, 2144K init, 332K bss, 49348K reserved, 0K cma-reserved, 1172272K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc2c2c000 - 0xc2e44000 (2144 kB) [ 0.000000] .data : 0xc19f6267 - 0xc2c2a680 (18641 kB) [ 0.000000] .text : 0xc1000000 - 0xc19f6267 (10200 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode…Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 [ 0.000000] CPU 0 irqstacks, hard=f600a000 soft=f600c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1999.978 MHz processor [ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency… 3999.95 BogoMIPS (lpj=1999978) [ 0.001014] pid_max: default: 32768 minimum: 301 [ 0.001019] ACPI: Core revision 20160108 [ 0.004642] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.004643] [ 0.004667] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004669] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004951] Disabled fast string operations [ 0.004953] CPU: Physical Processor ID: 0 [ 0.004954] CPU: Processor Core ID: 0 [ 0.004958] process: using mwait in idle threads [ 0.004965] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.004966] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0 [ 0.005216] Freeing SMP alternatives memory: 36K (c2e44000 - c2e4d000) [ 0.006084] smpboot: Max logical packages: 1 [ 0.006102] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.006107] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.006570] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.017000] smpboot: CPU0: Genuine Intel® CPU 1500 @ 2.00GHz (family: 0x6, model: 0xe, stepping: 0x8) [ 0.017000] Performance Events: unsupported p6 CPU model 14 no PMU driver, software events only. [ 0.025032] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.025034] NMI watchdog: Shutting down hard lockup detector on all cpus [ 0.031017] CPU 1 irqstacks, hard=f60f4000 soft=f60f6000 [ 0.031020] x86: Booting SMP configuration: [ 0.031022] … node #0, CPUs: #1 [ 0.002000] Initializing CPU#1 [ 0.002000] Disabled fast string operations [ 0.092056] x86: Booted up 1 node, 2 CPUs [ 0.092056] smpboot: Total of 2 processors activated (7999.72 BogoMIPS) [ 0.093147] devtmpfs: initialized [ 0.094214] PM: Registering ACPI NVS region [mem 0x7f0ca000-0x7f2cafff] (2101248 bytes) [ 0.094264] PM: Registering ACPI NVS region [mem 0x7febf000-0x7feeefff] (196608 bytes) [ 0.094375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.094390] pinctrl core: initialized pinctrl subsystem [ 0.094390] NET: Registered protocol family 16 [ 0.100008] cpuidle: using governor ladder [ 0.103009] cpuidle: using governor menu [ 0.103281] ACPI: bus type PCI registered [ 0.103354] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.103358] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.103360] PCI: Using MMCONFIG for extended config space [ 0.103362] PCI: Using configuration type 1 for base access [ 0.113053] ACPI: Added _OSI(Module Device) [ 0.113056] ACPI: Added _OSI(Processor Device) [ 0.113059] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.113061] ACPI: Added _OSI(Processor Aggregator Device) [ 0.113212] ACPI : EC: EC description table is found, configuring boot EC [ 0.113212] ACPI : EC: EC started [ 0.116361] ACPI: Dynamic OEM Table Load: [ 0.116371] ACPI: SSDT 0x00000000F6139000 00026C (v01 APPLE Cpu0Ist 00003000 INTL 20050309) [ 0.116705] ACPI: Dynamic OEM Table Load: [ 0.116712] ACPI: SSDT 0x00000000F612D200 0001BA (v01 APPLE Cpu0Cst 00003001 INTL 20050309) [ 0.117217] ACPI: Dynamic OEM Table Load: [ 0.117224] ACPI: SSDT 0x00000000F61093C0 000087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) [ 0.117518] ACPI: Dynamic OEM Table Load: [ 0.117525] ACPI: SSDT 0x00000000F6109480 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) [ 0.117899] ACPI: Interpreter enabled [ 0.117929] ACPI: (supports S0 S3 S5) [ 0.117931] ACPI: Using IOAPIC for interrupt routing [ 0.117969] PCI: Ignoring host bridge windows from ACPI; if necessary, use “pci=use_crs” and report a bug [ 0.123329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.123336] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.123753] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.124092] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.124095] acpi PNP0A08:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.124098] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.124101] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.124104] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored) [ 0.124107] PCI: root bus 00: using default resources [ 0.124159] PCI host bridge to bus 0000:00 [ 0.124163] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.124166] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.124169] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.124182] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 [ 0.124311] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400 [ 0.124361] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.124470] pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100 [ 0.124481] pci 0000:00:07.0: reg 0x10: [mem 0x88404000-0x88404fff] [ 0.124640] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.124665] pci 0000:00:1b.0: reg 0x10: [mem 0x88400000-0x88403fff 64bit] [ 0.124772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.124891] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.125009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.125126] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.125235] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.125359] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.125414] pci 0000:00:1d.0: reg 0x20: [io 0x30a0-0x30bf] [ 0.125508] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.125577] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.125631] pci 0000:00:1d.1: reg 0x20: [io 0x3080-0x309f] [ 0.125723] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.125788] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.125842] pci 0000:00:1d.2: reg 0x20: [io 0x3060-0x307f] [ 0.125938] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.126011] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.126066] pci 0000:00:1d.3: reg 0x20: [io 0x3040-0x305f] [ 0.126158] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.126236] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.126258] pci 0000:00:1d.7: reg 0x10: [mem 0x88405400-0x884057ff] [ 0.126359] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.126408] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.126479] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.126646] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 [ 0.126758] pci 0000:00:1f.0: can’t claim BAR 7 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] [ 0.126765] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.126770] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) [ 0.126775] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) [ 0.126779] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003) [ 0.126784] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) [ 0.126916] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.126933] pci 0000:00:1f.1: reg 0x10: [io 0x30e8-0x30ef] [ 0.126945] pci 0000:00:1f.1: reg 0x14: [io 0x30fc-0x30ff] [ 0.126958] pci 0000:00:1f.1: reg 0x18: [io 0x30e0-0x30e7] [ 0.126970] pci 0000:00:1f.1: reg 0x1c: [io 0x30f8-0x30fb] [ 0.126982] pci 0000:00:1f.1: reg 0x20: [io 0x30c0-0x30cf] [ 0.127015] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.127018] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.127021] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.127024] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.127130] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x01018f [ 0.127150] pci 0000:00:1f.2: reg 0x10: [io 0x30d8-0x30df] [ 0.127162] pci 0000:00:1f.2: reg 0x14: [io 0x30f4-0x30f7] [ 0.127174] pci 0000:00:1f.2: reg 0x18: [io 0x30d0-0x30d7] [ 0.127186] pci 0000:00:1f.2: reg 0x1c: [io 0x30f0-0x30f3] [ 0.127199] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x302f] [ 0.127211] pci 0000:00:1f.2: reg 0x24: [mem 0x88405000-0x884053ff] [ 0.127258] pci 0000:00:1f.2: PME# supported from D3hot [ 0.127370] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.127442] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.127631] pci 0000:01:00.0: [1002:71c5] type 00 class 0x030000 [ 0.127645] pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x87ffffff pref] [ 0.127654] pci 0000:01:00.0: reg 0x14: [io 0x2000-0x20ff] [ 0.127663] pci 0000:01:00.0: reg 0x18: [mem 0x88300000-0x8830ffff] [ 0.127688] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.127726] pci 0000:01:00.0: supports D1 D2 [ 0.127781] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with ‘pcie_aspm=force’ [ 0.127789] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.127793] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.127797] pci 0000:00:01.0: bridge window [mem 0x88300000-0x883fffff] [ 0.127802] pci 0000:00:01.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref] [ 0.127895] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000 [ 0.127931] pci 0000:02:00.0: reg 0x10: [mem 0x88200000-0x88203fff 64bit] [ 0.127948] pci 0000:02:00.0: reg 0x18: [io 0x1000-0x10ff] [ 0.128014] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.128107] pci 0000:02:00.0: supports D1 D2 [ 0.128110] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128150] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.128209] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with ‘pcie_aspm=force’ [ 0.128222] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.128227] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.128233] pci 0000:00:1c.0: bridge window [mem 0x88200000-0x882fffff] [ 0.128329] pci 0000:03:00.0: [14e4:4312] type 00 class 0x028000 [ 0.128358] pci 0000:03:00.0: reg 0x10: [mem 0x88100000-0x88103fff] [ 0.128538] pci 0000:03:00.0: supports D1 D2 [ 0.128576] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.128635] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with ‘pcie_aspm=force’ [ 0.128648] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.128656] pci 0000:00:1c.1: bridge window [mem 0x88100000-0x881fffff] [ 0.128731] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010 [ 0.128753] pci 0000:04:03.0: reg 0x10: [mem 0x88000000-0x88000fff] [ 0.128855] pci 0000:04:03.0: supports D1 D2 [ 0.128858] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot [ 0.128985] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.128993] pci 0000:00:1e.0: bridge window [mem 0x88000000-0x880fffff] [ 0.129009] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.129013] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.129039] pci_bus 0000:00: on NUMA node 0 [ 0.129192] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.129266] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.129337] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.129409] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.129479] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.129550] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.129622] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.129693] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.130082] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.130123] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.130216] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.130216] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.130216] vgaarb: loaded [ 0.130216] vgaarb: bridge control possible 0000:01:00.0 [ 0.130216] SCSI subsystem initialized [ 0.130216] libata version 3.00 loaded. [ 0.130216] ACPI: bus type USB registered [ 0.130216] usbcore: registered new interface driver usbfs [ 0.130216] usbcore: registered new interface driver hub [ 0.130216] usbcore: registered new device driver usb [ 0.130216] pps_core: LinuxPPS API ver. 1 registered [ 0.130216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.130216] PTP clock support registered [ 0.130290] wmi: Mapper loaded [ 0.130312] Advanced Linux Sound Architecture Driver Initialized. [ 0.130315] PCI: Using ACPI for IRQ routing [ 0.141114] PCI: pci_cache_line_size set to 64 bytes [ 0.141183] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.141185] e820: reserve RAM buffer [mem 0x7f0ca000-0x7fffffff] [ 0.141623] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.143047] clocksource: Switched to clocksource hpet [ 0.143178] pnp: PnP ACPI init [ 0.143289] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.143293] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.143296] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.143299] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.143303] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.143306] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.143312] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143555] pnp 00:01: Plug and Play ACPI device, IDs IFX0101 (active) [ 0.143686] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.143692] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.143731] pnp 00:03: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io 0x1000-0x1fff] [ 0.143808] system 00:03: [io 0x0680-0x06ef] has been reserved [ 0.143812] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.143815] system 00:03: [io 0x0810-0x0817] has been reserved [ 0.143818] system 00:03: [io 0x0400-0x047f] could not be reserved [ 0.143822] system 00:03: [io 0x0500-0x053f] has been reserved [ 0.143827] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143866] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.143889] pnp: PnP ACPI: found 5 devices [ 0.181997] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.192048] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 0.192058] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 0.192066] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 0.192075] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 0.192084] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 0.222108] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 0.222130] pci 0000:01:00.0: can’t claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.222134] pci 0000:02:00.0: can’t claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.222154] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.222172] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.222176] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.222190] pci 0000:00:1f.0: BAR 7: [io size 0x0080] has bogus alignment [ 0.222195] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222198] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222202] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222206] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222209] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.222212] pci 0000:00:1c.1: res[7]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.222218] pci 0000:00:1c.0: BAR 9: assigned [mem 0x88500000-0x886fffff 64bit pref] [ 0.222223] pci 0000:00:1c.1: BAR 9: assigned [mem 0x88700000-0x888fffff 64bit pref] [ 0.222227] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff] [ 0.222232] pci 0000:01:00.0: BAR 6: assigned [mem 0x88320000-0x8833ffff pref] [ 0.222235] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.222239] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.222243] pci 0000:00:01.0: bridge window [mem 0x88300000-0x883fffff] [ 0.222248] pci 0000:00:01.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref] [ 0.222254] pci 0000:02:00.0: BAR 6: assigned [mem 0x88220000-0x8823ffff pref] [ 0.222257] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.222261] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.222268] pci 0000:00:1c.0: bridge window [mem 0x88200000-0x882fffff] [ 0.222273] pci 0000:00:1c.0: bridge window [mem 0x88500000-0x886fffff 64bit pref] [ 0.222282] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.222289] pci 0000:00:1e.0: bridge window [mem 0x88000000-0x880fffff] [ 0.222301] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.222304] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.222307] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.222310] pci_bus 0000:01: resource 1 [mem 0x88300000-0x883fffff] [ 0.222313] pci_bus 0000:01: resource 2 [mem 0x80000000-0x87ffffff 64bit pref] [ 0.222316] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.222319] pci_bus 0000:02: resource 1 [mem 0x88200000-0x882fffff] [ 0.222322] pci_bus 0000:02: resource 2 [mem 0x88500000-0x886fffff 64bit pref] [ 0.222325] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.222328] pci_bus 0000:03: resource 1 [mem 0x88100000-0x881fffff] [ 0.222331] pci_bus 0000:03: resource 2 [mem 0x88700000-0x888fffff 64bit pref] [ 0.222334] pci_bus 0000:04: resource 1 [mem 0x88000000-0x880fffff] [ 0.222337] pci_bus 0000:04: resource 4 [io 0x0000-0xffff] [ 0.222340] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff] [ 0.222374] NET: Registered protocol family 2 [ 0.222557] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.222595] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) [ 0.222836] TCP: Hash tables configured (established 8192 bind 8192) [ 0.222910] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.222946] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.223090] NET: Registered protocol family 1 [ 0.223204] RPC: Registered named UNIX socket transport module. [ 0.223207] RPC: Registered udp transport module. [ 0.223208] RPC: Registered tcp transport module. [ 0.223210] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.224672] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.224686] PCI: CLS mismatch (256 != 64), using 64 bytes [ 0.266376] Scanning for low memory corruption every 60 seconds [ 0.266439] efifb: dmi detected iMac4,1 - framebuffer at 0x80010000 (1440x900, stride 5888) [ 0.266775] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.267050] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.270491] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.270843] NFS: Registering the id_resolver key type [ 0.270858] Key type id_resolver registered [ 0.270860] Key type id_legacy registered [ 0.270867] nfs4filelayout_init: NFSv4 File Layout Driver Registering… [ 0.272856] bounce: pool size: 64 pages [ 0.272918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.272922] io scheduler noop registered [ 0.273043] io scheduler cfq registered (default) [ 0.273908] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.273912] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.273917] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.273992] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.273996] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.274023] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.274094] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.274098] b43-pci-bridge 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.274104] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.274133] intel_idle: does not run on family 6 model 14 [ 0.274221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.274226] ACPI: Power Button [PWRB] [ 0.274333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.274336] ACPI: Power Button [PWRF] [ 0.274535] Monitor-Mwait will be used to enter C-1 state [ 0.274552] Monitor-Mwait will be used to enter C-2 state [ 0.274568] tsc: Marking TSC unstable due to TSC halts in idle [ 0.275104] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.275662] Linux agpgart interface v0.103 [ 0.275874] [drm] Initialized drm 1.1.0 20060810 [ 0.275901] [drm] radeon kernel modesetting enabled. [ 0.276318] [drm] initializing kernel modesetting (RV530 0x1002:0x71C5 0x106B:0x0080 0x00). [ 0.276330] [drm] register mmio base: 0x88300000 [ 0.276332] [drm] register mmio size: 65536 [ 0.276504] ATOM BIOS: M56P [ 0.276548] [drm] Generation 2 PCI interface, using max accessible memory [ 0.276554] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used) [ 0.276558] radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF [ 0.277641] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.277647] [drm] RAM width 128bits DDR [ 0.277746] [TTM] Zone kernel: Available graphics memory: 429800 kiB [ 0.277749] [TTM] Zone highmem: Available graphics memory: 1015936 kiB [ 0.277751] [TTM] Initializing pool allocator [ 0.277789] [drm] radeon: 128M of VRAM memory ready [ 0.277791] [drm] radeon: 512M of GTT memory ready. [ 0.277819] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.296705] [drm] radeon: 1 quad pipes, 2 z pipes initialized. [ 0.297503] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 0.297531] radeon 0000:01:00.0: WB enabled [ 0.297536] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000008000000 and cpu addr 0xff801000 [ 0.297539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.297541] [drm] Driver supports precise vblank timestamp query. [ 0.297544] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 0.297581] radeon 0000:01:00.0: radeon: using MSI. [ 0.297671] [drm] radeon: irq initialized. [ 0.297687] [drm] Loading R500 Microcode [ 0.297900] [drm] radeon: ring at 0x0000000008001000 [ 0.297938] [drm] ring test succeeded in 11 usecs [ 0.298213] [drm] ib test succeeded in 0 usecs [ 0.298728] [drm] Radeon Display Connectors [ 0.298731] [drm] Connector 0: [ 0.298733] [drm] LVDS-1 [ 0.298736] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 0.298737] [drm] Encoders: [ 0.298739] [drm] LCD1: INTERNAL_LVTM1 [ 0.298741] [drm] Connector 1: [ 0.298742] [drm] SVIDEO-1 [ 0.298744] [drm] Encoders: [ 0.298745] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 0.298747] [drm] Connector 2: [ 0.298748] [drm] DVI-I-1 [ 0.298750] [drm] HPD1 [ 0.298752] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 0.298754] [drm] Encoders: [ 0.298755] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 0.298757] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 0.474052] [drm] fb mappable at 0x800C0000 [ 0.474054] [drm] vram apper at 0x80000000 [ 0.474056] [drm] size 7258112 [ 0.474058] [drm] fb depth is 24 [ 0.474059] [drm] pitch is 6912 [ 0.474161] fbcon: radeondrmfb (fb0) is primary device [ 0.520655] Console: switching to colour frame buffer device 210x65 [ 0.529333] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 0.535063] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0 [ 0.535152] [drm] amdgpu kernel modesetting enabled. [ 0.539636] brd: module loaded [ 0.539700] loop: module loaded [ 0.540609] nbd: registered device at major 43 [ 0.543147] usbcore: registered new interface driver rtsx_usb [ 0.543176] Loading iSCSI transport class v2.0-870. [ 0.543328] iscsi: registered transport (tcp) [ 0.543531] ata_piix 0000:00:1f.1: version 2.13 [ 0.544736] scsi host0: ata_piix [ 0.544892] scsi host1: ata_piix [ 0.544965] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 0.544968] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 0.544993] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007) [ 0.545148] ata_piix 0000:00:1f.2: MAP [ P0 P2 – -- ] [ 0.707293] scsi host2: ata_piix [ 0.708442] scsi host3: ata_piix [ 0.708510] ata3: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 19 [ 0.708513] ata4: SATA max UDMA/133 cmd 0x30d0 ctl 0x30f0 bmdma 0x3028 irq 19 [ 0.709263] tun: Universal TUN/TAP device driver, 1.6 [ 0.709265] tun: © 1999-2004 Max Krasnyansky <[email protected]> [ 0.709355] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected] [ 0.709402] Atheros® L2 Ethernet Driver - version 2.2.3 [ 0.709404] Copyright © 2007 Atheros Corporation. [ 0.709559] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 0.710635] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 0.710663] e100: Intel® PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.710665] e100: Copyright© 1999-2006 Intel Corporation [ 0.710694] e1000: Intel® PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.710695] e1000: Copyright © 1999-2006 Intel Corporation. [ 0.710729] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k [ 0.710730] e1000e: Copyright© 1999 - 2015 Intel Corporation. [ 0.710762] igb: Intel® Gigabit Ethernet Network Driver - version 5.3.0-k [ 0.710764] igb: Copyright © 2007-2014 Intel Corporation. [ 0.710792] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 0.710845] sky2: driver version 1.30 [ 0.710957] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 [ 0.711513] sky2 0000:02:00.0 eth0: addr 00:16:cb:84:e8:61 [ 0.711763] PPP generic driver version 2.4.2 [ 0.711839] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver [ 0.711842] ehci-pci: EHCI PCI platform driver [ 0.712045] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.712055] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.712074] ehci-pci 0000:00:1d.7: debug port 1 [ 0.715978] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.716050] ehci-pci 0000:00:1d.7: irq 23, io mem 0x88405400 [ 0.717092] ata1.00: ATAPI: MATSHITADVD-R UJ-846, FB2U, max UDMA/66 [ 0.722051] ata1.00: configured for UDMA/66 [ 0.723061] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.723436] hub 1-0:1.0: USB hub found [ 0.723449] hub 1-0:1.0: 8 ports detected [ 0.723981] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver [ 0.723989] ohci-pci: OHCI PCI platform driver [ 0.724034] uhci_hcd: USB Universal Host Controller Interface driver [ 0.724193] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-846 FB2U PQ: 0 ANSI: 5 [ 0.724223] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.724232] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.724321] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0 [ 0.724715] hub 2-0:1.0: USB hub found [ 0.724737] hub 2-0:1.0: 2 ports detected [ 0.725103] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.725111] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.725188] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080 [ 0.725521] hub 3-0:1.0: USB hub found [ 0.725531] hub 3-0:1.0: 2 ports detected [ 0.725829] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.725838] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.725917] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060 [ 0.726175] hub 4-0:1.0: USB hub found [ 0.726185] hub 4-0:1.0: 2 ports detected [ 0.726488] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.726496] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.726569] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040 [ 0.726815] hub 5-0:1.0: USB hub found [ 0.726824] hub 5-0:1.0: 2 ports detected [ 0.727068] usbcore: registered new interface driver uas [ 0.727112] usbcore: registered new interface driver usb-storage [ 0.727199] mousedev: PS/2 mouse device common for all mice [ 0.727617] usbcore: registered new interface driver iforce [ 0.727836] usbcore: registered new interface driver xpad [ 0.727948] rtc_cmos 00:04: RTC can wake from S4 [ 0.728172] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.728250] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.728262] i2c /dev entries driver [ 0.728767] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255) [ 0.728775] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.728960] sdhci: Secure Digital Host Controller Interface driver [ 0.728962] sdhci: Copyright© Pierre Ossman [ 0.729029] No iBFT detected. [ 0.729061] hidraw: raw HID events driver © Jiri Kosina [ 0.729945] usbcore: registered new interface driver usbhid [ 0.729947] usbhid: USB HID core driver [ 0.730512] NET: Registered protocol family 10 [ 0.730862] NET: Registered protocol family 17 [ 0.730895] Key type dns_resolver registered [ 0.731234] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x0 [ 0.731241] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x0 [ 0.731306] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba [ 0.731323] Using IPI No-Shortcut mode [ 0.732045] console [netcon0] enabled [ 0.732047] netconsole: network logging started [ 0.732102] rtc_cmos 00:04: setting system clock to 2016-11-19 21:43:50 UTC (1479591830) [ 0.735323] ALSA device list: [ 0.735325] No soundcards found. [ 0.748824] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.748827] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.749167] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.749252] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.932571] ata3.01: ATA-7: ST3500830AS, 3.AAD, max UDMA/133 [ 0.932578] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.007516] ata3.01: configured for UDMA/133 [ 1.007755] scsi 2:0:1:0: Direct-Access ATA ST3500830AS D PQ: 0 ANSI: 5 [ 1.029415] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.029448] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 1.029473] sd 2:0:1:0: [sda] Write Protect is off [ 1.029475] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.029518] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [ 1.032055] usb 1-4: new high-speed USB device number 2 using ehci-pci [ 1.047178] sda: sda1 sda2 [ 1.047789] sd 2:0:1:0: [sda] Attached SCSI disk [ 1.048787] Freeing unused kernel memory: 2144K (c2c2c000 - c2e44000) [ 1.048918] Write protecting the kernel text: 10204k [ 1.049204] Write protecting the kernel read-only data: 18044k [ 1.312038] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8333791b, max_idle_ns: 881590617012 ns [ 1.512074] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 1.692099] EXT4-fs (sda1): couldn’t mount as ext3 due to feature incompatibilities [ 1.692408] EXT4-fs (sda1): couldn’t mount as ext2 due to feature incompatibilities [ 1.700425] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.790449] EXT4-fs (sda2): couldn’t mount as ext3 due to feature incompatibilities [ 1.790997] EXT4-fs (sda2): couldn’t mount as ext2 due to feature incompatibilities [ 1.844772] random: nonblocking pool is initialized [ 1.870845] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.958612] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:05AC:1000.0001/input/input2 [ 2.010391] hid-generic 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0 [ 2.026720] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:05AC:1000.0002/input/input3 [ 2.026937] hid-generic 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1 [ 2.239058] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 5.242216] systemd[1]: systemd 228 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 5.242423] systemd[1]: Detected architecture x86. [ 5.242537] systemd[1]: Running with unpopulated /etc. [ 5.242711] systemd[1]: Set hostname to <Lakka>. [ 5.242912] systemd[1]: Initializing machine ID from random generator. [ 5.307745] systemd[1]: Populated /etc with preset unit settings. [ 5.337413] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.337517] systemd[1]: Listening on Journal Socket. [ 5.337579] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.337636] systemd[1]: Listening on udev Control Socket. [ 5.337695] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.337779] systemd[1]: Created slice User and Session Slice. [ 5.337806] systemd[1]: Reached target Swap. [ 5.337849] systemd[1]: Listening on udev Kernel Socket. [ 5.337917] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.337941] systemd[1]: Reached target Paths. [ 5.362398] systemd[1]: Created slice System Slice. [ 5.367324] systemd[1]: Starting Load Kernel Modules… [ 5.368049] systemd[1]: Starting Remount Root and Kernel File Systems… [ 5.368630] systemd[1]: Starting Create list of required static device nodes for the current kernel… [ 5.369119] systemd[1]: Starting Show Version… [ 5.369619] systemd[1]: Mounting Debug File System… [ 5.370074] systemd[1]: Mounting Variable Directory… [ 5.370995] systemd[1]: Starting Set ondemand threshold… [ 5.371442] systemd[1]: Starting Setup machine-id… [ 5.371478] systemd[1]: Reached target Slices. [ 5.372105] systemd[1]: Mounting Temporary Directory… [ 5.372558] systemd[1]: Mounting POSIX Message Queue File System… [ 5.373105] systemd[1]: Started Load Kernel Modules. [ 5.374828] systemd[1]: Starting Apply Kernel Variables… [ 5.382063] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.382744] systemd[1]: Starting Create Static Device Nodes in /dev… [ 5.401762] systemd[1]: Mounted Debug File System. [ 5.401848] systemd[1]: Mounted POSIX Message Queue File System. [ 5.401951] systemd[1]: Mounted Variable Directory. [ 5.402037] systemd[1]: Mounted Temporary Directory. [ 5.405821] systemd[1]: Started Remount Root and Kernel File Systems. [ 5.406128] systemd[1]: Started Show Version. [ 5.406637] systemd[1]: Started Set ondemand threshold. [ 5.413758] systemd[1]: Started Apply Kernel Variables. [ 5.414192] systemd[1]: Started Create Static Device Nodes in /dev. [ 5.419627] systemd[1]: Started Setup machine-id. [ 5.473332] systemd[1]: Starting Journal Service… [ 5.473389] systemd[1]: Reached target Local File Systems (Pre). [ 5.479754] systemd[1]: Starting udev Coldplug all Devices… [ 5.479802] systemd[1]: Reached target Local File Systems. [ 5.480373] systemd[1]: Starting Setup Timezone data… [ 5.504144] systemd[1]: Started Setup Timezone data. [ 5.649845] systemd[1]: Started Journal Service. [ 5.669202] systemd-journald[221]: Received request to flush runtime journal from PID 1 [ 6.616030] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 6.663758] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9221 A1: line_outs=1 (0xc/0x0/0x0/0x0/0x0) type:speaker [ 6.663765] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.663769] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 6.663772] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 6.663775] snd_hda_codec_idt hdaudioC0D0: dig-out=0x10/0x0 [ 6.663777] snd_hda_codec_idt hdaudioC0D0: inputs: [ 6.663781] snd_hda_codec_idt hdaudioC0D0: Mic=0xb [ 6.663783] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 6.696089] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 6.705223] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 6.711696] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 6.712117] usb 5-1: USB disconnect, device number 2 [ 6.737373] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 6.758068] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8 [ 6.758091] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0 [ 6.758095] b43-phy0 warning: 5 GHz band is unsupported on this PHY [ 6.766145] Broadcom 43xx driver loaded [ Features: PNLS ] [ 6.778464] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’ [ 6.812566] sky2 0000:02:00.0 eth0: enabling interface [ 6.812697] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.128037] usb 5-1: new full-speed USB device number 4 using uhci_hcd [ 7.201866] firewire_core 0000:04:03.0: created device fw0: GUID 001451fffebcaaac, S400 [ 7.398274] Bluetooth: Core ver 2.21 [ 7.398304] NET: Registered protocol family 31 [ 7.398306] Bluetooth: HCI device and connection manager initialized [ 7.398314] Bluetooth: HCI socket layer initialized [ 7.398319] Bluetooth: L2CAP socket layer initialized [ 7.398332] Bluetooth: SCO socket layer initialized [ 7.408926] usbcore: registered new interface driver btusb [ 9.699236] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 9.699271] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Lakka:~ #

[fnard]

Lakka:~ # dmesg [ 0.000000] Linux version 4.6.3-rt8 (kivutar@gcc20) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT RT Tue Sep 13 22:52:09 CEST 2016 [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using ‘eager’ FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ede00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f0c9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f0ca000-0x000000007f2cafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f2cb000-0x000000007febefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007febf000-0x000000007feeefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007feef000-0x000000007fefffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Apple Computer, Inc. iMac4,1/Mac-F42787C8, BIOS IM41.88Z.0055.B08.0610121350 10/12/06 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f0ca max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x033fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x02eae000, 0x02eaefff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 APPLE ) [ 0.000000] ACPI: XSDT 0x000000007FEFD120 000074 (v01 APPLE Apple00 00000055 01000013) [ 0.000000] ACPI: FACP 0x000000007FEFB000 0000F4 (v03 APPLE Apple00 00000055 Loki 0000005F) [ 0.000000] ACPI: DSDT 0x000000007FEF1000 003D19 (v01 APPLE iMac 00040001 INTL 20050309) [ 0.000000] ACPI: FACS 0x000000007FEC1000 000040 [ 0.000000] ACPI: FACS 0x000000007FEC1000 000040 [ 0.000000] ACPI: HPET 0x000000007FEFA000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 0x000000007FEF9000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: MCFG 0x000000007FEF8000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ASF! 0x000000007FEF7000 00009C (v32 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SBST 0x000000007FEF6000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ECDT 0x000000007FEF5000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 0x000000007FEBD000 00064F (v01 APPLE SataPri 00001000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007FEBC000 00069C (v01 APPLE SataSec 00001000 INTL 20050309) [ 0.000000] ACPI: SSDT 0x000000007FEF0000 0004DC (v01 APPLE CpuPm 00003000 INTL 20050309) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1144MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x02eaf000, 0x02eaffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f0c9fff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f0c9fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f0c9fff] [ 0.000000] On node 0 totalpages: 520296 [ 0.000000] free_area_init_node: node 0, pgdat c2c22080, node_mem_map f6816020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 293068 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 18 pages/cpu @f67d7000 s43872 r0 d29856 u73728 [ 0.000000] pcpu-alloc: s43872 r0 d29856 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518520 [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage ssh quiet vt.global_cursor_default=0 loglevel=2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f0ca) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2031836K/2081184K available (10199K kernel code, 593K rwdata, 18040K rodata, 2144K init, 332K bss, 49348K reserved, 0K cma-reserved, 1172272K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc2c2c000 - 0xc2e44000 (2144 kB) [ 0.000000] .data : 0xc19f6267 - 0xc2c2a680 (18641 kB) [ 0.000000] .text : 0xc1000000 - 0xc19f6267 (10200 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode…Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 [ 0.000000] CPU 0 irqstacks, hard=f600a000 soft=f600c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1999.978 MHz processor [ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency… 3999.95 BogoMIPS (lpj=1999978) [ 0.001014] pid_max: default: 32768 minimum: 301 [ 0.001019] ACPI: Core revision 20160108 [ 0.004642] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.004643] [ 0.004667] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004669] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004951] Disabled fast string operations [ 0.004953] CPU: Physical Processor ID: 0 [ 0.004954] CPU: Processor Core ID: 0 [ 0.004958] process: using mwait in idle threads [ 0.004965] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.004966] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0 [ 0.005216] Freeing SMP alternatives memory: 36K (c2e44000 - c2e4d000) [ 0.006084] smpboot: Max logical packages: 1 [ 0.006102] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.006107] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.006570] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.017000] smpboot: CPU0: Genuine Intel® CPU 1500 @ 2.00GHz (family: 0x6, model: 0xe, stepping: 0x8) [ 0.017000] Performance Events: unsupported p6 CPU model 14 no PMU driver, software events only. [ 0.025032] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.025034] NMI watchdog: Shutting down hard lockup detector on all cpus [ 0.031017] CPU 1 irqstacks, hard=f60f4000 soft=f60f6000 [ 0.031020] x86: Booting SMP configuration: [ 0.031022] … node #0, CPUs: #1 [ 0.002000] Initializing CPU#1 [ 0.002000] Disabled fast string operations [ 0.092056] x86: Booted up 1 node, 2 CPUs [ 0.092056] smpboot: Total of 2 processors activated (7999.72 BogoMIPS) [ 0.093147] devtmpfs: initialized [ 0.094214] PM: Registering ACPI NVS region [mem 0x7f0ca000-0x7f2cafff] (2101248 bytes) [ 0.094264] PM: Registering ACPI NVS region [mem 0x7febf000-0x7feeefff] (196608 bytes) [ 0.094375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.094390] pinctrl core: initialized pinctrl subsystem [ 0.094390] NET: Registered protocol family 16 [ 0.100008] cpuidle: using governor ladder [ 0.103009] cpuidle: using governor menu [ 0.103281] ACPI: bus type PCI registered [ 0.103354] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.103358] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.103360] PCI: Using MMCONFIG for extended config space [ 0.103362] PCI: Using configuration type 1 for base access [ 0.113053] ACPI: Added _OSI(Module Device) [ 0.113056] ACPI: Added _OSI(Processor Device) [ 0.113059] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.113061] ACPI: Added _OSI(Processor Aggregator Device) [ 0.113212] ACPI : EC: EC description table is found, configuring boot EC [ 0.113212] ACPI : EC: EC started [ 0.116361] ACPI: Dynamic OEM Table Load: [ 0.116371] ACPI: SSDT 0x00000000F6139000 00026C (v01 APPLE Cpu0Ist 00003000 INTL 20050309) [ 0.116705] ACPI: Dynamic OEM Table Load: [ 0.116712] ACPI: SSDT 0x00000000F612D200 0001BA (v01 APPLE Cpu0Cst 00003001 INTL 20050309) [ 0.117217] ACPI: Dynamic OEM Table Load: [ 0.117224] ACPI: SSDT 0x00000000F61093C0 000087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309) [ 0.117518] ACPI: Dynamic OEM Table Load: [ 0.117525] ACPI: SSDT 0x00000000F6109480 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309) [ 0.117899] ACPI: Interpreter enabled [ 0.117929] ACPI: (supports S0 S3 S5) [ 0.117931] ACPI: Using IOAPIC for interrupt routing [ 0.117969] PCI: Ignoring host bridge windows from ACPI; if necessary, use “pci=use_crs” and report a bug [ 0.123329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.123336] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.123753] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.124092] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.124095] acpi PNP0A08:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.124098] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.124101] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.124104] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored) [ 0.124107] PCI: root bus 00: using default resources [ 0.124159] PCI host bridge to bus 0000:00 [ 0.124163] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.124166] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.124169] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.124182] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 [ 0.124311] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400 [ 0.124361] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.124470] pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100 [ 0.124481] pci 0000:00:07.0: reg 0x10: [mem 0x88404000-0x88404fff] [ 0.124640] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.124665] pci 0000:00:1b.0: reg 0x10: [mem 0x88400000-0x88403fff 64bit] [ 0.124772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.124891] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.125009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.125126] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.125235] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.125359] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.125414] pci 0000:00:1d.0: reg 0x20: [io 0x30a0-0x30bf] [ 0.125508] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.125577] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.125631] pci 0000:00:1d.1: reg 0x20: [io 0x3080-0x309f] [ 0.125723] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.125788] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.125842] pci 0000:00:1d.2: reg 0x20: [io 0x3060-0x307f] [ 0.125938] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.126011] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.126066] pci 0000:00:1d.3: reg 0x20: [io 0x3040-0x305f] [ 0.126158] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.126236] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.126258] pci 0000:00:1d.7: reg 0x10: [mem 0x88405400-0x884057ff] [ 0.126359] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.126408] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.126479] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.126646] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 [ 0.126758] pci 0000:00:1f.0: can’t claim BAR 7 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] [ 0.126765] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.126770] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) [ 0.126775] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f) [ 0.126779] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003) [ 0.126784] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f) [ 0.126916] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.126933] pci 0000:00:1f.1: reg 0x10: [io 0x30e8-0x30ef] [ 0.126945] pci 0000:00:1f.1: reg 0x14: [io 0x30fc-0x30ff] [ 0.126958] pci 0000:00:1f.1: reg 0x18: [io 0x30e0-0x30e7] [ 0.126970] pci 0000:00:1f.1: reg 0x1c: [io 0x30f8-0x30fb] [ 0.126982] pci 0000:00:1f.1: reg 0x20: [io 0x30c0-0x30cf] [ 0.127015] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.127018] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.127021] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.127024] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.127130] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x01018f [ 0.127150] pci 0000:00:1f.2: reg 0x10: [io 0x30d8-0x30df] [ 0.127162] pci 0000:00:1f.2: reg 0x14: [io 0x30f4-0x30f7] [ 0.127174] pci 0000:00:1f.2: reg 0x18: [io 0x30d0-0x30d7] [ 0.127186] pci 0000:00:1f.2: reg 0x1c: [io 0x30f0-0x30f3] [ 0.127199] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x302f] [ 0.127211] pci 0000:00:1f.2: reg 0x24: [mem 0x88405000-0x884053ff] [ 0.127258] pci 0000:00:1f.2: PME# supported from D3hot [ 0.127370] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.127442] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.127631] pci 0000:01:00.0: [1002:71c5] type 00 class 0x030000 [ 0.127645] pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x87ffffff pref] [ 0.127654] pci 0000:01:00.0: reg 0x14: [io 0x2000-0x20ff] [ 0.127663] pci 0000:01:00.0: reg 0x18: [mem 0x88300000-0x8830ffff] [ 0.127688] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.127726] pci 0000:01:00.0: supports D1 D2 [ 0.127781] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with ‘pcie_aspm=force’ [ 0.127789] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.127793] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.127797] pci 0000:00:01.0: bridge window [mem 0x88300000-0x883fffff] [ 0.127802] pci 0000:00:01.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref] [ 0.127895] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000 [ 0.127931] pci 0000:02:00.0: reg 0x10: [mem 0x88200000-0x88203fff 64bit] [ 0.127948] pci 0000:02:00.0: reg 0x18: [io 0x1000-0x10ff] [ 0.128014] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.128107] pci 0000:02:00.0: supports D1 D2 [ 0.128110] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128150] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.128209] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with ‘pcie_aspm=force’ [ 0.128222] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.128227] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.128233] pci 0000:00:1c.0: bridge window [mem 0x88200000-0x882fffff] [ 0.128329] pci 0000:03:00.0: [14e4:4312] type 00 class 0x028000 [ 0.128358] pci 0000:03:00.0: reg 0x10: [mem 0x88100000-0x88103fff] [ 0.128538] pci 0000:03:00.0: supports D1 D2 [ 0.128576] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.128635] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with ‘pcie_aspm=force’ [ 0.128648] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.128656] pci 0000:00:1c.1: bridge window [mem 0x88100000-0x881fffff] [ 0.128731] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010 [ 0.128753] pci 0000:04:03.0: reg 0x10: [mem 0x88000000-0x88000fff] [ 0.128855] pci 0000:04:03.0: supports D1 D2 [ 0.128858] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot [ 0.128985] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.128993] pci 0000:00:1e.0: bridge window [mem 0x88000000-0x880fffff] [ 0.129009] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.129013] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.129039] pci_bus 0000:00: on NUMA node 0 [ 0.129192] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.129266] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.129337] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.129409] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.129479] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.129550] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.129622] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.129693] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.130082] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.130123] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.130216] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.130216] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.130216] vgaarb: loaded [ 0.130216] vgaarb: bridge control possible 0000:01:00.0 [ 0.130216] SCSI subsystem initialized [ 0.130216] libata version 3.00 loaded. [ 0.130216] ACPI: bus type USB registered [ 0.130216] usbcore: registered new interface driver usbfs [ 0.130216] usbcore: registered new interface driver hub [ 0.130216] usbcore: registered new device driver usb [ 0.130216] pps_core: LinuxPPS API ver. 1 registered [ 0.130216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.130216] PTP clock support registered [ 0.130290] wmi: Mapper loaded [ 0.130312] Advanced Linux Sound Architecture Driver Initialized. [ 0.130315] PCI: Using ACPI for IRQ routing [ 0.141114] PCI: pci_cache_line_size set to 64 bytes [ 0.141183] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.141185] e820: reserve RAM buffer [mem 0x7f0ca000-0x7fffffff] [ 0.141623] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.143047] clocksource: Switched to clocksource hpet [ 0.143178] pnp: PnP ACPI init [ 0.143289] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.143293] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.143296] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.143299] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.143303] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.143306] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.143312] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143555] pnp 00:01: Plug and Play ACPI device, IDs IFX0101 (active) [ 0.143686] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.143692] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.143731] pnp 00:03: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io 0x1000-0x1fff] [ 0.143808] system 00:03: [io 0x0680-0x06ef] has been reserved [ 0.143812] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.143815] system 00:03: [io 0x0810-0x0817] has been reserved [ 0.143818] system 00:03: [io 0x0400-0x047f] could not be reserved [ 0.143822] system 00:03: [io 0x0500-0x053f] has been reserved [ 0.143827] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.143866] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.143889] pnp: PnP ACPI: found 5 devices [ 0.181997] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.192048] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 0.192058] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 0.192066] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 0.192075] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 0.192084] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 0.222108] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 0.222130] pci 0000:01:00.0: can’t claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.222134] pci 0000:02:00.0: can’t claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.222154] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.222172] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.222176] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.222190] pci 0000:00:1f.0: BAR 7: [io size 0x0080] has bogus alignment [ 0.222195] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222198] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222202] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222206] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.222209] pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.222212] pci 0000:00:1c.1: res[7]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.222218] pci 0000:00:1c.0: BAR 9: assigned [mem 0x88500000-0x886fffff 64bit pref] [ 0.222223] pci 0000:00:1c.1: BAR 9: assigned [mem 0x88700000-0x888fffff 64bit pref] [ 0.222227] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff] [ 0.222232] pci 0000:01:00.0: BAR 6: assigned [mem 0x88320000-0x8833ffff pref] [ 0.222235] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.222239] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.222243] pci 0000:00:01.0: bridge window [mem 0x88300000-0x883fffff] [ 0.222248] pci 0000:00:01.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref] [ 0.222254] pci 0000:02:00.0: BAR 6: assigned [mem 0x88220000-0x8823ffff pref] [ 0.222257] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.222261] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.222268] pci 0000:00:1c.0: bridge window [mem 0x88200000-0x882fffff] [ 0.222273] pci 0000:00:1c.0: bridge window [mem 0x88500000-0x886fffff 64bit pref] [ 0.222282] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.222289] pci 0000:00:1e.0: bridge window [mem 0x88000000-0x880fffff] [ 0.222301] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.222304] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.222307] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.222310] pci_bus 0000:01: resource 1 [mem 0x88300000-0x883fffff] [ 0.222313] pci_bus 0000:01: resource 2 [mem 0x80000000-0x87ffffff 64bit pref] [ 0.222316] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.222319] pci_bus 0000:02: resource 1 [mem 0x88200000-0x882fffff] [ 0.222322] pci_bus 0000:02: resource 2 [mem 0x88500000-0x886fffff 64bit pref] [ 0.222325] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.222328] pci_bus 0000:03: resource 1 [mem 0x88100000-0x881fffff] [ 0.222331] pci_bus 0000:03: resource 2 [mem 0x88700000-0x888fffff 64bit pref] [ 0.222334] pci_bus 0000:04: resource 1 [mem 0x88000000-0x880fffff] [ 0.222337] pci_bus 0000:04: resource 4 [io 0x0000-0xffff] [ 0.222340] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff] [ 0.222374] NET: Registered protocol family 2 [ 0.222557] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.222595] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) [ 0.222836] TCP: Hash tables configured (established 8192 bind 8192) [ 0.222910] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.222946] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.223090] NET: Registered protocol family 1 [ 0.223204] RPC: Registered named UNIX socket transport module. [ 0.223207] RPC: Registered udp transport module. [ 0.223208] RPC: Registered tcp transport module. [ 0.223210] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.224672] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.224686] PCI: CLS mismatch (256 != 64), using 64 bytes [ 0.266376] Scanning for low memory corruption every 60 seconds [ 0.266439] efifb: dmi detected iMac4,1 - framebuffer at 0x80010000 (1440x900, stride 5888) [ 0.266775] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.267050] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.270491] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.270843] NFS: Registering the id_resolver key type [ 0.270858] Key type id_resolver registered [ 0.270860] Key type id_legacy registered [ 0.270867] nfs4filelayout_init: NFSv4 File Layout Driver Registering… [ 0.272856] bounce: pool size: 64 pages [ 0.272918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.272922] io scheduler noop registered [ 0.273043] io scheduler cfq registered (default) [ 0.273908] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.273912] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.273917] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 0.273992] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.273996] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.274023] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.274094] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.274098] b43-pci-bridge 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.274104] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.274133] intel_idle: does not run on family 6 model 14 [ 0.274221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.274226] ACPI: Power Button [PWRB] [ 0.274333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.274336] ACPI: Power Button [PWRF] [ 0.274535] Monitor-Mwait will be used to enter C-1 state [ 0.274552] Monitor-Mwait will be used to enter C-2 state [ 0.274568] tsc: Marking TSC unstable due to TSC halts in idle [ 0.275104] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.275662] Linux agpgart interface v0.103 [ 0.275874] [drm] Initialized drm 1.1.0 20060810 [ 0.275901] [drm] radeon kernel modesetting enabled. [ 0.276318] [drm] initializing kernel modesetting (RV530 0x1002:0x71C5 0x106B:0x0080 0x00). [ 0.276330] [drm] register mmio base: 0x88300000 [ 0.276332] [drm] register mmio size: 65536 [ 0.276504] ATOM BIOS: M56P [ 0.276548] [drm] Generation 2 PCI interface, using max accessible memory [ 0.276554] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used) [ 0.276558] radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF [ 0.277641] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.277647] [drm] RAM width 128bits DDR [ 0.277746] [TTM] Zone kernel: Available graphics memory: 429800 kiB [ 0.277749] [TTM] Zone highmem: Available graphics memory: 1015936 kiB [ 0.277751] [TTM] Initializing pool allocator [ 0.277789] [drm] radeon: 128M of VRAM memory ready [ 0.277791] [drm] radeon: 512M of GTT memory ready. [ 0.277819] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.296705] [drm] radeon: 1 quad pipes, 2 z pipes initialized. [ 0.297503] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 0.297531] radeon 0000:01:00.0: WB enabled [ 0.297536] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000008000000 and cpu addr 0xff801000 [ 0.297539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.297541] [drm] Driver supports precise vblank timestamp query. [ 0.297544] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 0.297581] radeon 0000:01:00.0: radeon: using MSI. [ 0.297671] [drm] radeon: irq initialized. [ 0.297687] [drm] Loading R500 Microcode [ 0.297900] [drm] radeon: ring at 0x0000000008001000 [ 0.297938] [drm] ring test succeeded in 11 usecs [ 0.298213] [drm] ib test succeeded in 0 usecs [ 0.298728] [drm] Radeon Display Connectors [ 0.298731] [drm] Connector 0: [ 0.298733] [drm] LVDS-1 [ 0.298736] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 0.298737] [drm] Encoders: [ 0.298739] [drm] LCD1: INTERNAL_LVTM1 [ 0.298741] [drm] Connector 1: [ 0.298742] [drm] SVIDEO-1 [ 0.298744] [drm] Encoders: [ 0.298745] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 0.298747] [drm] Connector 2: [ 0.298748] [drm] DVI-I-1 [ 0.298750] [drm] HPD1 [ 0.298752] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 0.298754] [drm] Encoders: [ 0.298755] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 0.298757] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 0.474052] [drm] fb mappable at 0x800C0000 [ 0.474054] [drm] vram apper at 0x80000000 [ 0.474056] [drm] size 7258112 [ 0.474058] [drm] fb depth is 24 [ 0.474059] [drm] pitch is 6912 [ 0.474161] fbcon: radeondrmfb (fb0) is primary device [ 0.520655] Console: switching to colour frame buffer device 210x65 [ 0.529333] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 0.535063] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0 [ 0.535152] [drm] amdgpu kernel modesetting enabled. [ 0.539636] brd: module loaded [ 0.539700] loop: module loaded [ 0.540609] nbd: registered device at major 43 [ 0.543147] usbcore: registered new interface driver rtsx_usb [ 0.543176] Loading iSCSI transport class v2.0-870. [ 0.543328] iscsi: registered transport (tcp) [ 0.543531] ata_piix 0000:00:1f.1: version 2.13 [ 0.544736] scsi host0: ata_piix [ 0.544892] scsi host1: ata_piix [ 0.544965] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 0.544968] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 0.544993] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007) [ 0.545148] ata_piix 0000:00:1f.2: MAP [ P0 P2 – -- ] [ 0.707293] scsi host2: ata_piix [ 0.708442] scsi host3: ata_piix [ 0.708510] ata3: SATA max UDMA/133 cmd 0x30d8 ctl 0x30f4 bmdma 0x3020 irq 19 [ 0.708513] ata4: SATA max UDMA/133 cmd 0x30d0 ctl 0x30f0 bmdma 0x3028 irq 19 [ 0.709263] tun: Universal TUN/TAP device driver, 1.6 [ 0.709265] tun: © 1999-2004 Max Krasnyansky <[email protected]> [ 0.709355] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected] [ 0.709402] Atheros® L2 Ethernet Driver - version 2.2.3 [ 0.709404] Copyright © 2007 Atheros Corporation. [ 0.709559] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 0.710635] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 0.710663] e100: Intel® PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.710665] e100: Copyright© 1999-2006 Intel Corporation [ 0.710694] e1000: Intel® PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.710695] e1000: Copyright © 1999-2006 Intel Corporation. [ 0.710729] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k [ 0.710730] e1000e: Copyright© 1999 - 2015 Intel Corporation. [ 0.710762] igb: Intel® Gigabit Ethernet Network Driver - version 5.3.0-k [ 0.710764] igb: Copyright © 2007-2014 Intel Corporation. [ 0.710792] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 0.710845] sky2: driver version 1.30 [ 0.710957] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 [ 0.711513] sky2 0000:02:00.0 eth0: addr 00:16:cb:84:e8:61 [ 0.711763] PPP generic driver version 2.4.2 [ 0.711839] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver [ 0.711842] ehci-pci: EHCI PCI platform driver [ 0.712045] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.712055] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.712074] ehci-pci 0000:00:1d.7: debug port 1 [ 0.715978] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.716050] ehci-pci 0000:00:1d.7: irq 23, io mem 0x88405400 [ 0.717092] ata1.00: ATAPI: MATSHITADVD-R UJ-846, FB2U, max UDMA/66 [ 0.722051] ata1.00: configured for UDMA/66 [ 0.723061] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.723436] hub 1-0:1.0: USB hub found [ 0.723449] hub 1-0:1.0: 8 ports detected [ 0.723981] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver [ 0.723989] ohci-pci: OHCI PCI platform driver [ 0.724034] uhci_hcd: USB Universal Host Controller Interface driver [ 0.724193] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-846 FB2U PQ: 0 ANSI: 5 [ 0.724223] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.724232] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.724321] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0 [ 0.724715] hub 2-0:1.0: USB hub found [ 0.724737] hub 2-0:1.0: 2 ports detected [ 0.725103] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.725111] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.725188] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080 [ 0.725521] hub 3-0:1.0: USB hub found [ 0.725531] hub 3-0:1.0: 2 ports detected [ 0.725829] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.725838] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.725917] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060 [ 0.726175] hub 4-0:1.0: USB hub found [ 0.726185] hub 4-0:1.0: 2 ports detected [ 0.726488] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.726496] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.726569] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040 [ 0.726815] hub 5-0:1.0: USB hub found [ 0.726824] hub 5-0:1.0: 2 ports detected [ 0.727068] usbcore: registered new interface driver uas [ 0.727112] usbcore: registered new interface driver usb-storage [ 0.727199] mousedev: PS/2 mouse device common for all mice [ 0.727617] usbcore: registered new interface driver iforce [ 0.727836] usbcore: registered new interface driver xpad [ 0.727948] rtc_cmos 00:04: RTC can wake from S4 [ 0.728172] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.728250] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.728262] i2c /dev entries driver [ 0.728767] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255) [ 0.728775] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.728960] sdhci: Secure Digital Host Controller Interface driver [ 0.728962] sdhci: Copyright© Pierre Ossman [ 0.729029] No iBFT detected. [ 0.729061] hidraw: raw HID events driver © Jiri Kosina [ 0.729945] usbcore: registered new interface driver usbhid [ 0.729947] usbhid: USB HID core driver [ 0.730512] NET: Registered protocol family 10 [ 0.730862] NET: Registered protocol family 17 [ 0.730895] Key type dns_resolver registered [ 0.731234] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x0 [ 0.731241] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x0 [ 0.731306] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba [ 0.731323] Using IPI No-Shortcut mode [ 0.732045] console [netcon0] enabled [ 0.732047] netconsole: network logging started [ 0.732102] rtc_cmos 00:04: setting system clock to 2016-11-19 21:43:50 UTC (1479591830) [ 0.735323] ALSA device list: [ 0.735325] No soundcards found. [ 0.748824] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.748827] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.749167] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.749252] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.932571] ata3.01: ATA-7: ST3500830AS, 3.AAD, max UDMA/133 [ 0.932578] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.007516] ata3.01: configured for UDMA/133 [ 1.007755] scsi 2:0:1:0: Direct-Access ATA ST3500830AS D PQ: 0 ANSI: 5 [ 1.029415] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.029448] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 1.029473] sd 2:0:1:0: [sda] Write Protect is off [ 1.029475] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.029518] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [ 1.032055] usb 1-4: new high-speed USB device number 2 using ehci-pci [ 1.047178] sda: sda1 sda2 [ 1.047789] sd 2:0:1:0: [sda] Attached SCSI disk [ 1.048787] Freeing unused kernel memory: 2144K (c2c2c000 - c2e44000) [ 1.048918] Write protecting the kernel text: 10204k [ 1.049204] Write protecting the kernel read-only data: 18044k [ 1.312038] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8333791b, max_idle_ns: 881590617012 ns [ 1.512074] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 1.692099] EXT4-fs (sda1): couldn’t mount as ext3 due to feature incompatibilities [ 1.692408] EXT4-fs (sda1): couldn’t mount as ext2 due to feature incompatibilities [ 1.700425] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.790449] EXT4-fs (sda2): couldn’t mount as ext3 due to feature incompatibilities [ 1.790997] EXT4-fs (sda2): couldn’t mount as ext2 due to feature incompatibilities [ 1.844772] random: nonblocking pool is initialized [ 1.870845] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.958612] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:05AC:1000.0001/input/input2 [ 2.010391] hid-generic 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0 [ 2.026720] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:05AC:1000.0002/input/input3 [ 2.026937] hid-generic 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1 [ 2.239058] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 5.242216] systemd[1]: systemd 228 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 5.242423] systemd[1]: Detected architecture x86. [ 5.242537] systemd[1]: Running with unpopulated /etc. [ 5.242711] systemd[1]: Set hostname to <Lakka>. [ 5.242912] systemd[1]: Initializing machine ID from random generator. [ 5.307745] systemd[1]: Populated /etc with preset unit settings. [ 5.337413] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.337517] systemd[1]: Listening on Journal Socket. [ 5.337579] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.337636] systemd[1]: Listening on udev Control Socket. [ 5.337695] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.337779] systemd[1]: Created slice User and Session Slice. [ 5.337806] systemd[1]: Reached target Swap. [ 5.337849] systemd[1]: Listening on udev Kernel Socket. [ 5.337917] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.337941] systemd[1]: Reached target Paths. [ 5.362398] systemd[1]: Created slice System Slice. [ 5.367324] systemd[1]: Starting Load Kernel Modules… [ 5.368049] systemd[1]: Starting Remount Root and Kernel File Systems… [ 5.368630] systemd[1]: Starting Create list of required static device nodes for the current kernel… [ 5.369119] systemd[1]: Starting Show Version… [ 5.369619] systemd[1]: Mounting Debug File System… [ 5.370074] systemd[1]: Mounting Variable Directory… [ 5.370995] systemd[1]: Starting Set ondemand threshold… [ 5.371442] systemd[1]: Starting Setup machine-id… [ 5.371478] systemd[1]: Reached target Slices. [ 5.372105] systemd[1]: Mounting Temporary Directory… [ 5.372558] systemd[1]: Mounting POSIX Message Queue File System… [ 5.373105] systemd[1]: Started Load Kernel Modules. [ 5.374828] systemd[1]: Starting Apply Kernel Variables… [ 5.382063] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.382744] systemd[1]: Starting Create Static Device Nodes in /dev… [ 5.401762] systemd[1]: Mounted Debug File System. [ 5.401848] systemd[1]: Mounted POSIX Message Queue File System. [ 5.401951] systemd[1]: Mounted Variable Directory. [ 5.402037] systemd[1]: Mounted Temporary Directory. [ 5.405821] systemd[1]: Started Remount Root and Kernel File Systems. [ 5.406128] systemd[1]: Started Show Version. [ 5.406637] systemd[1]: Started Set ondemand threshold. [ 5.413758] systemd[1]: Started Apply Kernel Variables. [ 5.414192] systemd[1]: Started Create Static Device Nodes in /dev. [ 5.419627] systemd[1]: Started Setup machine-id. [ 5.473332] systemd[1]: Starting Journal Service… [ 5.473389] systemd[1]: Reached target Local File Systems (Pre). [ 5.479754] systemd[1]: Starting udev Coldplug all Devices… [ 5.479802] systemd[1]: Reached target Local File Systems. [ 5.480373] systemd[1]: Starting Setup Timezone data… [ 5.504144] systemd[1]: Started Setup Timezone data. [ 5.649845] systemd[1]: Started Journal Service. [ 5.669202] systemd-journald[221]: Received request to flush runtime journal from PID 1 [ 6.616030] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 6.663758] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9221 A1: line_outs=1 (0xc/0x0/0x0/0x0/0x0) type:speaker [ 6.663765] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.663769] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0) [ 6.663772] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 6.663775] snd_hda_codec_idt hdaudioC0D0: dig-out=0x10/0x0 [ 6.663777] snd_hda_codec_idt hdaudioC0D0: inputs: [ 6.663781] snd_hda_codec_idt hdaudioC0D0: Mic=0xb [ 6.663783] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 6.696089] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 6.705223] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 6.711696] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 6.712117] usb 5-1: USB disconnect, device number 2 [ 6.737373] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 6.758068] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8 [ 6.758091] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0 [ 6.758095] b43-phy0 warning: 5 GHz band is unsupported on this PHY [ 6.766145] Broadcom 43xx driver loaded [ Features: PNLS ] [ 6.778464] ieee80211 phy0: Selected rate control algorithm ‘minstrel_ht’ [ 6.812566] sky2 0000:02:00.0 eth0: enabling interface [ 6.812697] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.128037] usb 5-1: new full-speed USB device number 4 using uhci_hcd [ 7.201866] firewire_core 0000:04:03.0: created device fw0: GUID 001451fffebcaaac, S400 [ 7.398274] Bluetooth: Core ver 2.21 [ 7.398304] NET: Registered protocol family 31 [ 7.398306] Bluetooth: HCI device and connection manager initialized [ 7.398314] Bluetooth: HCI socket layer initialized [ 7.398319] Bluetooth: L2CAP socket layer initialized [ 7.398332] Bluetooth: SCO socket layer initialized [ 7.408926] usbcore: registered new interface driver btusb [ 9.699236] sky2 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 9.699271] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Lakka:~ #

[fnard]

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV530/M56-P [Mobility Radeon X1600] [1002:71c5] Subsystem: Apple Inc. RV530/M56-P [Mobility Radeon X1600] (MacBook Pro) [106b:0080] Kernel driver in use: radeon 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22)

[gouchi]

You can try to set video parameters into the cmdline for the connector and resolution you want.

[gridrunner]

This thread may also help http://libretro.com/forums/showthread.php?t=7511

[fnard]

This thread may also help http://libretro.com/forums/showthread.php?t=7511

Thanks for the link. Has gotten me some new info, but still no solution.

You can try to set video parameters into the cmdline for the connector and resolution you want.

Have been trying to get into the cmdline, but when I open it, it is totally blank. Doesn’t seem right, or I’m just doing it wrong. Anyways, when I do # for p in /sys/class/drm//status; do con=${p%/status}; echo -n "${con#/card?-}: "; cat $p; done, [FONT=arial]I get [/FONT]DVI-I-1: disconnected LVDS-1: connected SVIDEO-1: disconnected I tried adding video=LVDS-1:d to the config file, but no dice.