Hi, everyone! I’ve installed Lakka on my lattepanda (google it) and have a few questions. I had no problems with installing, but I was wondering if you guys could help me figure out how to set up bluetooth and/or wifi.
There are a couple posts about bluetooth and wifi on the lattepanda forums if that helps: http://www.lattepanda.com/forum/viewtopic.php?f=6&t=58&start=90#p2327
Thanks in advance! 
(I’m not sure if this is the right place to post this, and I’m sorry if it is in the wrong place.)
Hi,
Is it possible to provide the output of lsusb and lspci -nn. You will need to access Lakka command line interface.
Thank you.
[QUOTE=gouchi;50565]Hi,
Is it possible to provide the output of lsusb and lspci -nn. You will need to access Lakka command line interface.
Thank you.[/QUOTE] lsusb:
Lakka:~ # lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0bda:8152 Realtek Semiconductor Corp.
Bus 001 Device 005: ID 413c:2107 Dell Computer Corp.
Bus 001 Device 004: ID 2341:8036 Arduino SA Leonardo (CDC ACM, HID)
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lspci -nn:
Lakka:~ # lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:2280] (rev 22)
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:22b0] (rev 22)
00:03.0 Multimedia controller [0480]: Intel Corporation Device [8086:22b8] (rev 22)
00:0b.0 Signal processing controller [1180]: Intel Corporation Device [8086:22dc] (rev 22)
00:11.0 SD Host controller [0805]: Intel Corporation Device [8086:2295] (rev 22)
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:22b5] (rev 22)
00:15.0 Multimedia audio controller [0401]: Intel Corporation Device [8086:22a8] (rev 22)
00:1a.0 Encryption controller [1080]: Intel Corporation Device [8086:2298] (rev 22)
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:229c] (rev 22)
I don’t see the wifi card and the bluetooth device also ?
[QUOTE=gouchi;50603]I don’t see the wifi card and the bluetooth device also ?[/QUOTE] I’m not sure why, but I know it does have both of those devices. From their page: integrated WiFi and Bluetooth 4.0
Bump. Since that seems to be a problem, I just grabbed a bluetooth dongle to use bluetooth. Now, it seems like the lattepanda is not recognizing that I have an HDMI cable plugged in, any tips on that?
EDIT: Also, I’ve connected my Wii Remote and I am having troubles configuring it. Any time I bind keys it just reverts back to its unusable state. also, can I use a nunchuck as well?
System Logs:
RetroArch [INFO] :: === Build =======================================Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AES
Built: Nov 6 2016
RetroArch [INFO] :: Version: 1.3.6
RetroArch [INFO] :: Git: e218f0f
RetroArch [INFO] :: =================================================
RetroArch [INFO] :: Loading default config.
RetroArch [INFO] :: Looking for config in: "/storage/.config/retroarch/retroarch.cfg".
RetroArch [INFO] :: Resetting undo buffers.
RetroArch [INFO] :: Environ SET_PIXEL_FORMAT: RGB565.
RetroArch [INFO] :: Version of libretro API: 1
RetroArch [INFO] :: Compiled against API: 1
RetroArch [INFO] :: Set audio input rate to: 29970.03 Hz.
RetroArch [INFO] :: Found shader "/usr/share/common-shaders/bilinear.glslp"
RetroArch [INFO] :: Found shader "/usr/share/common-shaders/nearest.glslp"
RetroArch [INFO] :: Found shader "/usr/share/common-shaders/stock.glsl"
RetroArch [INFO] :: Video @ fullscreen
RetroArch [INFO] :: Starting threaded video driver ...
RetroArch [INFO] :: [DRM]: Found 5 connectors.
RetroArch [INFO] :: [DRM]: Connector 0 connected: no
RetroArch [INFO] :: [DRM]: Connector 0 has 0 modes.
RetroArch [INFO] :: [DRM]: Connector 1 connected: no
RetroArch [INFO] :: [DRM]: Connector 1 has 0 modes.
RetroArch [INFO] :: [DRM]: Connector 2 connected: no
RetroArch [INFO] :: [DRM]: Connector 2 has 0 modes.
RetroArch [INFO] :: [DRM]: Connector 3 connected: no
RetroArch [INFO] :: [DRM]: Connector 3 has 0 modes.
RetroArch [INFO] :: [DRM]: Connector 4 connected: yes
RetroArch [INFO] :: [DRM]: Connector 4 has 1 modes.
RetroArch [INFO] :: [DRM]: Connector 4 assigned to monitor index: #1.
RetroArch [INFO] :: [DRM]: Mode 0: (1024x600) 1024 x 600, 60 Hz
RetroArch [INFO] :: Found GL context: kms
RetroArch [INFO] :: Detecting screen resolution 1024x600.
RetroArch [INFO] :: [EGL]: EGL version: 1.4
RetroArch [INFO] :: [EGL]: Current context: 0x7f7a38121600.
RetroArch [INFO] :: [KMS]: New FB: 1024x600 (stride: 4096).
RetroArch [INFO] :: [GL]: Vendor: Intel Open Source Technology Center, Renderer: Mesa DRI Intel(R) HD Graphics (Cherryview) .
RetroArch [INFO] :: [GL]: Version: 3.0 Mesa 11.2.0-rc1.
RetroArch [INFO] :: GL: Using resolution 1024x600
RetroArch [INFO] :: [GL]: Default shader backend found: glsl.
RetroArch [INFO] :: [Shader driver]: Using GLSL shader backend.
RetroArch [INFO] :: Checking GLSL shader support ...
RetroArch [WARN] :: [GL]: Stock GLSL shaders will be used.
RetroArch [INFO] :: Found GLSL vertex shader.
RetroArch [INFO] :: Found GLSL fragment shader.
RetroArch [INFO] :: Linking GLSL program.
RetroArch [INFO] :: Found GLSL vertex shader.
RetroArch [INFO] :: Found GLSL fragment shader.
RetroArch [INFO] :: Linking GLSL program.
RetroArch [INFO] :: Found GLSL vertex shader.
RetroArch [INFO] :: Found GLSL fragment shader.
RetroArch [INFO] :: Linking GLSL program.
RetroArch [INFO] :: Found GLSL vertex shader.
RetroArch [INFO] :: Found GLSL fragment shader.
RetroArch [INFO] :: Linking GLSL program.
RetroArch [INFO] :: Found GLSL vertex shader.
RetroArch [INFO] :: Found GLSL fragment shader.
RetroArch [INFO] :: Linking GLSL program.
RetroArch [INFO] :: [GL]: Using 4 textures.
RetroArch [INFO] :: [GL]: Loaded 1 program(s).
RetroArch [INFO] :: [GL]: Using GL_RGB565 for texture uploads.
RetroArch [INFO] :: Using font rendering backend: freetype.
RetroArch [INFO] :: Graphics driver did not initialize an input driver. Attempting to pick a suitable driver.
RetroArch [INFO] :: [udev] Adding device /dev/input/event3 as type ID_INPUT_KEYBOARD.
RetroArch [INFO] :: [udev] Adding device /dev/input/mouse0 as type ID_INPUT_KEYBOARD.
RetroArch [INFO] :: [udev] Adding device /dev/input/event3 as type ID_INPUT_MOUSE.
RetroArch [INFO] :: [udev] Adding device /dev/input/mouse0 as type ID_INPUT_MOUSE.
RetroArch [INFO] :: Found joypad driver: "udev".
RetroArch [ERROR] :: ALSA: Failed to initialize...
RetroArch [ERROR] :: Failed to initialize audio driver. Will continue without audio.
RetroArch [INFO] :: Found menu display driver: "menu_display_gl".
RetroArch [INFO] :: Using font rendering backend: freetype.
RetroArch [INFO] :: Using font rendering backend: freetype.
RetroArch [ERROR] :: Implementation uses threaded audio. Cannot use rewind..
RetroArch [INFO] :: Disconnecting device from port 2.
RetroArch [INFO] :: SRAM will not be saved.
RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_history.lpl].
RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_music_history.lpl].
RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_video_history.lpl].
RetroArch [INFO] :: Loading history file: [/storage/.config/retroarch/content_image_history.lpl].
RetroArch [ERROR] :: failed_to_start_audio_driver
RetroArch [INFO] :: [KMS]: New FB: 1024x600 (stride: 4096).
RetroArch [INFO] :: [KMS]: New FB: 1024x600 (stride: 4096).
RetroArch [INFO] :: Monitor FPS estimation is disabled for threaded video.
To clarify, I have no problems using the lattepanda screen that came with it, but displaying external doesn’t work at all.
Bump. Any help with this?
To clarify, I have no problems using the lattepanda screen that came with it, but displaying external doesn’t work at all. ??
According to the log, video_monitor_index option should be set to video_monitor_index = “1”