Wifi usb stick sweex not working anymore

Dear reader, wifi stick brand sweex not working anymore after newest upgrade. Somebody ansolution? Kind regards Sam

Hi,

Is it possible to provide the output of lsusb and dmesg ? You will have to access to Lakka command line interface.

Thank you.

Hello Gouchi, Sounds abracadabra for me, in older version of lakka was working out of the box. I am on holiday now, so can not try anything. Kind regards sam

Hello, I fail to open a new Thread, so I try here: My wifi usb stick isnt working either. It used to, a couple of years ago. I tried to fix it myself but wasn’t able to do that either: lsusb gives me this Lakka:~ # lsusb Bus 002 Device 005: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter Bus 002 Device 004: ID 2101:8501 ActionStar Bus 002 Device 003: ID 2101:8500 ActionStar Bus 002 Device 002: ID 04b4:6570 Cypress Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Sorry for 2. post. that was a missclick.
connmanctl doesn’t list wifi

Lakka:~ # connmanctl technologies
/net/connman/technology/ethernet
  Name = Wired
  Type = ethernet
  Powered = True
  Connected = True
  Tethering = False

demsg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.19+rt25 (kivutar@buildserver3) (gcc version 7.3.0 (GCC) ) #1 SMP PREEMPT RT Tue Oct 23 10:15:56 CEST 2018
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: SolidRun HummingBoard Dual/Quad
[    0.000000] cma: Reserved 320 MiB at 0x3c000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat 80f51940, node_mem_map ab758000
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 13 pages/cpu @ab71c000 s24416 r8192 d20640 u53248
[    0.000000] pcpu-alloc: s24416 r8192 d20640 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
[    0.000000] Kernel command line: root=/dev/ram0 rdinit=/init noram usbcore.autosuspend=-1 coherent_pool=2M pci=nomsi boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet morequiet video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 dmfc=3 consoleblank=0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 694388K/1048576K available (9684K kernel code, 755K rwdata, 2936K rodata, 2392K init, 278K bss, 26508K reserved, 327680K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc0800000 - 0xff800000   (1008 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .text : 0x80008000 - 0x80c5b3a8   (12621 kB)
[    0.000000]       .init : 0x80c5c000 - 0x80eb2000   (2392 kB)
[    0.000000]       .data : 0x80eb2000 - 0x80f6eda8   ( 756 kB)
[    0.000000]        .bss : 0x80f71000 - 0x80fb6b50   ( 279 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 4
[    0.000000]  Build-time adjustment of leaf fanout to 2.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000]  RCU kthread priority: 7.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=2, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 4 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[    0.000000] Switching to timer-based delay loop, resolution 15ns
[    0.000006] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
[    0.000017] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
[    0.001195] Console: colour dummy device 80x30
[    0.001470] console [tty0] enabled
[    0.099601] Calibrating delay loop (skipped), value calculated using timer frequency.. 132.00 BogoMIPS (lpj=132000)
[    0.099606] pid_max: default: 32768 minimum: 301
[    0.099712] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.099720] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.100382] Initializing cgroup subsys io
[    0.100397] Initializing cgroup subsys devices
[    0.100408] Initializing cgroup subsys freezer
[    0.100417] Initializing cgroup subsys net_cls
[    0.100426] Initializing cgroup subsys net_prio
[    0.100435] Initializing cgroup subsys pids
[    0.100476] CPU: Testing write buffer coherency: ok
[    0.100481] ftrace: allocating 31902 entries in 63 pages
[    0.149749] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.149904] Setting up static identity map for 0x10008280 - 0x100082d8
[    0.175889] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.175985] Brought up 2 CPUs
[    0.176002] SMP: Total of 2 processors activated (264.00 BogoMIPS).
[    0.176010] CPU: All CPU(s) started in SVC mode.
[    0.176450] devtmpfs: initialized
[    0.185775] pinctrl core: initialized pinctrl subsystem
[    0.186367] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.186530] Bus freq driver module loaded
[    0.186817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
[    0.205037] xor: measuring software checksum speed
[    0.223624]    arm4regs  :  1212.000 MB/sec
[    0.243625]    8regs     :   958.000 MB/sec
[    0.263607]    32regs    :  1002.000 MB/sec
[    0.283624]    neon      :   888.000 MB/sec
[    0.283635] xor: using function: arm4regs (1212.000 MB/sec)
[    0.285019] NET: Registered protocol family 16
[    0.302768] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.303552] i2c /dev entries driver
[    0.311614] cpuidle: using governor menu
[    0.312128] Use WDOG1 as reset source
[    0.312216] CPU identified as i.MX6Q, silicon rev 1.5
[    0.327481] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[    0.330887] i2c i2c-0: IMX I2C adapter registered
[    0.330905] i2c i2c-0: can't use DMA
[    0.331932] i2c i2c-1: IMX I2C adapter registered
[    0.331949] i2c i2c-1: can't use DMA
[    0.332733] i2c i2c-2: IMX I2C adapter registered
[    0.332760] i2c i2c-2: can't use DMA
[    0.337670] imx-ipuv3 2400000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
[    0.339789] sram 905000.sram: adding chunk 0x0-0x3b000
[    0.339819] sram 905000.sram: SRAM pool: 236 KiB @ 0xc0980000
[    0.343668] imx-ipuv3 2800000.ipu: IPU DMFC ONLY-DP HIGH RESOLUTION: 5B(0~3), 5F(4~7)
[    0.346945] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.346956] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.348808] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
[    0.348823] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
[    0.348902] MIPI CSI2 driver module loaded
[    0.402150] raid6: int32x1  gen()   107 MB/s
[    0.435625] raid6: int32x1  xor()   141 MB/s
[    0.469643] raid6: int32x2  gen()   169 MB/s
[    0.503753] raid6: int32x2  xor()   167 MB/s
[    0.537699] raid6: int32x4  gen()   195 MB/s
[    0.571707] raid6: int32x4  xor()   159 MB/s
[    0.605737] raid6: int32x8  gen()   224 MB/s
[    0.639708] raid6: int32x8  xor()   152 MB/s
[    0.673613] raid6: neonx1   gen()   621 MB/s
[    0.707623] raid6: neonx1   xor()   455 MB/s
[    0.741690] raid6: neonx2   gen()   681 MB/s
[    0.775625] raid6: neonx2   xor()   587 MB/s
[    0.809635] raid6: neonx4   gen()   550 MB/s
[    0.843622] raid6: neonx4   xor()   529 MB/s
[    0.877674] raid6: neonx8   gen()   511 MB/s
[    0.911624] raid6: neonx8   xor()   452 MB/s
[    0.911636] raid6: using algorithm neonx2 gen() 681 MB/s
[    0.911643] raid6: .... xor() 587 MB/s, rmw enabled
[    0.911651] raid6: using intx1 recovery algorithm
[    0.912149] mxc_sdc_fb fb@0: register mxc display driver hdmi
[    0.913651] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    0.913673] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[    0.913935] EDID specified in file:
[    0.913951] mxc_sdc_fb fb@0: registered mxc display driver hdmi IPU1_DISP0
[    0.990008] mxs-dma 110000.dma-apbh: initialized
[    0.993326] vgaarb: loaded
[    0.994264] SCSI subsystem initialized
[    0.994487] libata version 3.00 loaded.
[    0.994774] usbcore: registered new interface driver usbfs
[    0.994844] usbcore: registered new interface driver hub
[    0.994934] usbcore: registered new device driver usb
[    0.995455] media: Linux media interface: v0.10
[    0.995519] Linux video capture interface: v2.00
[    0.995688] pps_core: LinuxPPS API ver. 1 registered
[    0.995698] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.995727] PTP clock support registered
[    0.996415] Advanced Linux Sound Architecture Driver Initialized.
[    0.997554] Bluetooth: Core ver 2.21
[    0.997644] NET: Registered protocol family 31
[    0.997654] Bluetooth: HCI device and connection manager initialized
[    0.997671] Bluetooth: HCI socket layer initialized
[    0.997685] Bluetooth: L2CAP socket layer initialized
[    0.997724] Bluetooth: SCO socket layer initialized
[    0.998391] clocksource: Switched to clocksource mxc_timer1
[    1.042003] Console: switching to colour frame buffer device 240x67
[    1.096521] NET: Registered protocol family 2
[    1.097632] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.097769] TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
[    1.098491] TCP: Hash tables configured (established 8192 bind 8192)
[    1.098643] UDP hash table entries: 512 (order: 3, 32768 bytes)
[    1.098770] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[    1.099352] NET: Registered protocol family 1
[    1.099940] RPC: Registered named UNIX socket transport module.
[    1.099951] RPC: Registered udp transport module.
[    1.099959] RPC: Registered tcp transport module.
[    1.099966] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.099992] PCI: CLS 0 bytes, default 64
[    1.120602] mxc_hdmi 20e0000.hdmi_video: vic: 16, xres = 1920, yres = 1080, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 17, pclk = 7194
[    1.120622] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 1360, yres = 768, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 1, pclk = 11627
[    1.120635] mxc_hdmi 20e0000.hdmi_video: vic: 2, xres = 720, yres = 480, ratio = 4/3, freq = 60.0Hz, vmode = 2048, flag = 1, pclk = 37037
[    1.120646] mxc_hdmi 20e0000.hdmi_video: vic: 19, xres = 1280, yres = 720, ratio = 16/9, freq = 50.0Hz, vmode = 8192, flag = 1, pclk = 13468
[    1.120657] mxc_hdmi 20e0000.hdmi_video: vic: 3, xres = 720, yres = 480, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 1, pclk = 37037
[    1.120668] mxc_hdmi 20e0000.hdmi_video: vic: 18, xres = 720, yres = 576, ratio = 16/9, freq = 50.0Hz, vmode = 8192, flag = 1, pclk = 37037
[    1.120680] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 1280, yres = 1024, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 6, pclk = 9259
[    1.120692] mxc_hdmi 20e0000.hdmi_video: vic: 4, xres = 1280, yres = 720, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 2, pclk = 13468
[    1.120703] mxc_hdmi 20e0000.hdmi_video: vic: 5, xres = 1920, yres = 1080, ratio = 16/9, freq = 60.0Hz, vmode = 8193, flag = 2, pclk = 13468
[    1.120713] mxc_hdmi 20e0000.hdmi_video: vic: 7, xres = 1440, yres = 480, ratio = 16/9, freq = 60.0Hz, vmode = 8193, flag = 2, pclk = 37000
[    1.120725] mxc_hdmi 20e0000.hdmi_video: vic: 14, xres = 1440, yres = 480, ratio = 4/3, freq = 60.0Hz, vmode = 2048, flag = 2, pclk = 18500
[    1.120738] mxc_hdmi 20e0000.hdmi_video: vic: 20, xres = 1920, yres = 1080, ratio = 16/9, freq = 50.0Hz, vmode = 8193, flag = 2, pclk = 13468
[    1.120750] mxc_hdmi 20e0000.hdmi_video: vic: 22, xres = 1440, yres = 576, ratio = 16/9, freq = 50.0Hz, vmode = 8193, flag = 2, pclk = 37037
[    1.120761] mxc_hdmi 20e0000.hdmi_video: vic: 30, xres = 1440, yres = 576, ratio = 16/9, freq = 50.0Hz, vmode = 8192, flag = 2, pclk = 18518
[    1.120773] mxc_hdmi 20e0000.hdmi_video: vic: 31, xres = 1920, yres = 1080, ratio = 16/9, freq = 50.0Hz, vmode = 8192, flag = 2, pclk = 6734
[    1.120785] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 720, yres = 400, ratio = 16/9, freq = 70.0Hz, vmode = 8192, flag = 8, pclk = 38210
[    1.120798] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 640, yres = 480, ratio = 4/3, freq = 75.0Hz, vmode = 2048, flag = 4, pclk = 31746
[    1.120809] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 800, yres = 600, ratio = 4/3, freq = 60.0Hz, vmode = 2048, flag = 4, pclk = 25000
[    1.120820] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 800, yres = 600, ratio = 4/3, freq = 75.0Hz, vmode = 2048, flag = 4, pclk = 20202
[    1.120831] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 1024, yres = 768, ratio = 4/3, freq = 60.0Hz, vmode = 2048, flag = 4, pclk = 15384
[    1.120865] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 1440, yres = 896, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 0, pclk = 9365
[    1.120878] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 1680, yres = 1048, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 0, pclk = 6809
[    1.120889] mxc_hdmi 20e0000.hdmi_video: vic: 0, xres = 1360, yres = 760, ratio = 16/9, freq = 60.0Hz, vmode = 8192, flag = 0, pclk = 11807
[    1.162938] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_cable_connected reports HDMI mode
[    1.216522] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.218099] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.229103] VFS: Disk quotas dquot_6.6.0
[    1.229270] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.230333] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.233318] NFS: Registering the id_resolver key type
[    1.233357] Key type id_resolver registered
[    1.233360] Key type id_legacy registered
[    1.233661] fuse init (API version 7.23)
[    1.243322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.243335] io scheduler noop registered
[    1.243344] io scheduler deadline registered
[    1.243484] io scheduler cfq registered
[    1.243621] io scheduler bfq registered (default)
[    1.244133] BFQ I/O-scheduler version: v7r7
[    1.244134] imx-weim 21b8000.weim: Driver registered.
[    1.247737] PCI host bridge /soc/pcie@0x01000000 ranges:
[    1.247745]   No bus range found for /soc/pcie@0x01000000, using [bus 00-ff]
[    1.247767]   err 0x01f00000..0x01f7ffff -> 0x01f00000
[    1.247779]    IO 0x01f80000..0x01f8ffff -> 0x00000000
[    1.247790]   MEM 0x01000000..0x01efffff -> 0x01000000
[    1.550419] imx6q-pcie 1ffc000.pcie: phy link never came up
[    1.550806] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00
[    1.550823] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.550837] pci_bus 0000:00: root bus resource [??? 0x01f00000-0x01f7ffff flags 0x0]
[    1.550849] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.550861] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
[    1.550894] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
[    1.550929] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    1.550948] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    1.551009] pci 0000:00:00.0: supports D1
[    1.551021] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
[    1.551249] PCI: bus0: Fast back to back transfers disabled
[    1.551383] PCI: bus1: Fast back to back transfers enabled
[    1.551475] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff]
[    1.551494] pci 0000:00:00.0: BAR 6: assigned [mem 0x01100000-0x0110ffff pref]
[    1.551509] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.551600] pcieport 0000:00:00.0: PCIe capabilities: 0x9
[    1.551614] pcieport 0000:00:00.0: init_service_irqs: 0
[    1.551867] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    1.551884] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
[    1.553965] imx-sdma 20ec000.sdma: loaded firmware 3.3
[    1.556804] imx-sdma 20ec000.sdma: initialized
[    1.656413] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.658051] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX
[    1.659005] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 299, base_baud = 5000000) is a IMX
[    1.659817] [drm] Initialized drm 1.1.0 20060810
[    1.672033] brd: module loaded
[    1.672190] loop: module loaded
[    1.672206] mGine mflash driver, (c) 2008 mGine Co.
[    1.673967] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1025, using 00000024
[    1.673984] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 3330, using 00000480
[    1.673997] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000
[    1.674009] ahci-imx 2200000.sata: fsl,receive-eq-mdB value 3000, using 05000000
[    1.676490] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[    1.676524] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    1.676541] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[    1.678367] scsi host0: ahci-imx
[    1.678798] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 309
[    1.681451] libphy: Fixed MDIO Bus: probed
[    1.682972] 2188000.ethernet supply phy not found, using dummy regulator
[    1.686808] pps pps0: new PPS source ptp0
[    1.692966] libphy: fec_enet_mii_bus: probed
[    1.749414] fec 2188000.ethernet eth0: set 100mbps
[    1.749430] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[    1.749791] fec 2188000.ethernet eth0: registered PHC device 0
[    1.751042] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.751077] ehci-pci: EHCI PCI platform driver
[    1.751157] ehci-platform: EHCI generic platform driver
[    1.751468] ehci-mxc: Freescale On-Chip EHCI Host driver
[    1.752297] usbcore: registered new interface driver uas
[    1.752422] usbcore: registered new interface driver usb-storage
[    1.752480] usbcore: registered new interface driver ums-alauda
[    1.752531] usbcore: registered new interface driver ums-cypress
[    1.752580] usbcore: registered new interface driver ums-datafab
[    1.752629] usbcore: registered new interface driver ums_eneub6250
[    1.752678] usbcore: registered new interface driver ums-freecom
[    1.752726] usbcore: registered new interface driver ums-isd200
[    1.752775] usbcore: registered new interface driver ums-jumpshot
[    1.752832] usbcore: registered new interface driver ums-onetouch
[    1.752901] usbcore: registered new interface driver ums-realtek
[    1.752951] usbcore: registered new interface driver ums-sddr09
[    1.753000] usbcore: registered new interface driver ums-sddr55
[    1.753049] usbcore: registered new interface driver ums-usbat
[    1.753161] usbcore: registered new interface driver usbserial
[    1.753205] usbcore: registered new interface driver usbserial_generic
[    1.753250] usbserial: USB Serial support registered for generic
[    1.758417] ci_hdrc ci_hdrc.0: doesn't support gadget
[    1.758450] ci_hdrc ci_hdrc.0: EHCI Host Controller
[    1.758483] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[    1.766420] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[    1.767286] hub 1-0:1.0: USB hub found
[    1.767338] hub 1-0:1.0: 1 port detected
[    1.771310] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    1.771342] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[    1.778428] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    1.779255] hub 2-0:1.0: USB hub found
[    1.779299] hub 2-0:1.0: 1 port detected
[    1.781733] rtc-pcf8523: probe of 0-0068 failed with error -11
[    1.782508] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
[    1.784815] mxc_v4l2_output v4l2_out: V4L2 device registered as video16
[    1.785000] mxc_v4l2_output v4l2_out: V4L2 device registered as video17
[    1.788102] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
[    1.788253] md: linear personality registered for level -1
[    1.788269] md: raid0 personality registered for level 0
[    1.788283] md: raid1 personality registered for level 1
[    1.788295] md: raid10 personality registered for level 10
[    1.788309] Bluetooth: HCI UART driver ver 2.3
[    1.788318] Bluetooth: HCI UART protocol H4 registered
[    1.788325] Bluetooth: HCI UART protocol BCSP registered
[    1.788332] Bluetooth: HCI UART protocol LL registered
[    1.788339] Bluetooth: HCI UART protocol ATH3K registered
[    1.788346] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.788562] Bluetooth: HCI UART protocol Intel registered
[    1.788677] Bluetooth: HCI UART protocol BCM registered
[    1.788686] Bluetooth: HCI UART protocol QCA registered
[    1.788946] sdhci: Secure Digital Host Controller Interface driver
[    1.788955] sdhci: Copyright(c) Pierre Ossman
[    1.789034] usbcore: registered new interface driver ushc
[    1.789050] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.790194] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
[    1.990424] ata1: SATA link down (SStatus 0 SControl 300)
[    1.990467] ahci-imx 2200000.sata: no device found, disabling link.
[    1.990479] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
[    2.024418] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[    2.025256] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
[    2.058099] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[    2.067289] caam 2100000.caam: Entropy delay = 3200
[    2.070428] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[    2.128084] caam 2100000.caam: Instantiated RNG4 SH0
[    2.174417] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[    2.188845] caam 2100000.caam: Instantiated RNG4 SH1
[    2.188962] caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
[    2.188974] caam 2100000.caam: job rings = 2, qi = 0
[    2.195388] caam algorithms registered in /proc/crypto
[    2.199326] caam_jr 2101000.jr0: registering rng-caam
[    2.199501] hidraw: raw HID events driver (C) Jiri Kosina
[    2.199688] usbcore: registered new interface driver usbhid
[    2.199697] usbhid: USB HID core driver
[    2.200794] Galcore version 5.0.11.33433
[    2.377103] mmc1: host does not support reading read-only switch, assuming write-enable
[    2.400205] hub 2-1:1.0: USB hub found
[    2.400671] hub 2-1:1.0: 4 ports detected
[    2.425712] mmc1: new ultra high speed DDR50 SDHC card at address 0007
[    2.430490] mmcblk0: mmc1:0007 SD32G 29.0 GiB
[    2.432322]  mmcblk0: p1 p2
[    2.647111] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[    2.648249] mxc_vpu 2040000.vpu: VPU initialized
[    2.649206] mxc_hdmi_cec soc:hdmi_cec@00120000: hdmi_cec_dev_probe: HDMI CEC initialized
[    2.650901] sgtl5000: probe of 0-000a failed with error -11
[    2.657318] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[    2.657580] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[    2.659803] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
[    2.663994] imx-audio-hdmi sound-hdmi: hdmi-hifi <-> soc:hdmi_audio@00120000 mapping ok
[    2.665067] Initializing XFRM netlink socket
[    2.665105] NET: Registered protocol family 17
[    2.665153] NET: Registered protocol family 15
[    2.665454] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.665473] Bluetooth: HIDP socket layer initialized
[    2.665820] Key type dns_resolver registered
[    2.666534] IMX6 OC: Overclock not active
[    2.668113] ThumbEE CPU extension supported.
[    2.668136] Registering SWP/SWPB emulation handler
[    2.670345] Btrfs loaded
[    2.671432] Key type encrypted registered
[    2.671682] cryptodev: driver 1.7 loaded.
[    2.672484] usb 2-1.1: new high-speed USB device number 3 using ci_hdrc
[    2.672805] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
[    2.673382] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[    2.673593] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[    2.674118] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:17:49 UTC (1069)
[    2.766785] hub 2-1.1:1.0: USB hub found
[    2.767290] hub 2-1.1:1.0: 5 ports detected
[    2.771532] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[    2.771750] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[    2.814688] ALSA device list:
[    2.814698]   #0: imx-spdif
[    2.814704]   #1: imx-hdmi-soc
[    2.817008] Freeing unused kernel memory: 2392K (80c5c000 - 80eb2000)
[    3.042438] usb 2-1.1.1: new high-speed USB device number 4 using ci_hdrc
[    3.128135] hid-generic 0003:2101:8501.0001: hiddev0,hidraw0: USB HID v1.11 Device [Action Star USB HID] on usb-ci_hdrc.1-1.1.1/input0
[    3.128732] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[    3.128758] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[    3.192423] usb 2-1.1.2: new full-speed USB device number 5 using ci_hdrc
[    3.279803] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[    3.279818] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[    5.570891] random: nonblocking pool is initialized
[    9.036060] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    9.036803] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    9.181870] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    9.667084] systemd[1]: System time before build time, advancing clock.
[    9.775741] NET: Registered protocol family 10
[    9.797006] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    9.797407] systemd[1]: Detected architecture arm.
[    9.797785] systemd[1]: Set hostname to <Lakka>.
[    9.921176] systemd[1]: Listening on udev Kernel Socket.
[    9.921640] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.922085] systemd[1]: Listening on RPCbind Server Activation Socket.
[    9.922323] systemd[1]: Listening on udev Control Socket.
[    9.923524] systemd[1]: Created slice User and Session Slice.
[    9.923621] systemd[1]: Reached target Swap.
[    9.924210] systemd[1]: Created slice System Slice.
[    9.932691] systemd[1]: Mounting Variable Directory...
[    9.936365] systemd[1]: Mounting Debug File System...
[    9.938993] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.939252] systemd[1]: Reached target Slices.
[    9.942209] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.942566] systemd[1]: Reached target Paths.
[    9.952162] systemd[1]: Mounting POSIX Message Queue File System...
[    9.952605] systemd[1]: Reached target RPC Port Mapper.
[    9.959154] systemd[1]: Mounting Temporary Directory...
[   10.001131] systemd[1]: Listening on Journal Socket.
[   10.018906] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.022964] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.026911] systemd[1]: Starting Samba Configuration...
[   10.027281] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.030587] systemd[1]: Starting Setup machine-id...
[   10.037768] systemd[1]: Starting Load Kernel Modules...
[   10.057265] systemd[1]: Mounted Debug File System.
[   10.057433] systemd[1]: Mounted POSIX Message Queue File System.
[   10.057556] systemd[1]: Mounted Variable Directory.
[   10.057681] systemd[1]: Mounted Temporary Directory.
[   10.068345] systemd[1]: Started Remount Root and Kernel File Systems.
[   10.111209] systemd[1]: Starting udev Coldplug all Devices...
[   10.115852] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   10.119212] systemd[1]: Started Load Kernel Modules.
[   10.123536] systemd[1]: Starting Apply Kernel Variables...
[   10.128843] systemd[1]: Mounting FUSE Control File System...
[   10.140236] systemd[1]: Mounting Configuration File System...
[   10.167146] systemd[1]: Started Setup machine-id.
[   10.187233] systemd[1]: Started Samba Configuration.
[   10.187985] systemd[1]: Mounted Configuration File System.
[   10.195808] systemd[1]: Mounted FUSE Control File System.
[   10.210557] systemd[1]: Started Apply Kernel Variables.
[   10.236972] systemd[1]: Starting Journal Service...
[   10.240875] systemd[1]: Starting Create Static Device Nodes in /dev...
[   10.294852] systemd[1]: Started Create Static Device Nodes in /dev.
[   10.295440] systemd[1]: Reached target Local File Systems (Pre).
[   10.295554] systemd[1]: Reached target Local File Systems.
[   10.444501] systemd[1]: Started Journal Service.
[   10.486223] systemd-journald[344]: Received request to flush runtime journal from PID 1
[   12.029968] Console: switching to colour dummy device 80x30
[   12.729853] Registered IR keymap rc-rc6-mce
[   12.730202] input: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0/input0
[   12.730611] rc0: gpio_ir_recv as /devices/soc0/ir-receiver/rc/rc0
[   12.809456] IR NEC protocol handler initialized
[   12.810261] IR RC6 protocol handler initialized
[   12.811634] IR RC5(x/sz) protocol handler initialized
[   12.821919] IR JVC protocol handler initialized
[   12.838512] IR SANYO protocol handler initialized
[   12.841818] IR Sony protocol handler initialized

1/2

Hope that helps isolating the problem

dmesg 2/2:

[   12.848169] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   12.848186] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[   12.851672] IR Sharp protocol handler initialized
[   12.877525] lirc_dev: IR Remote Control driver registered, major 238
[   12.890328] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1
[   12.898184] IR MCE Keyboard/mouse protocol handler initialized
[   12.929415] IR XMP protocol handler initialized
[   12.942130] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
[   12.942147] IR LIRC bridge handler initialized
[   13.291934] spi_imx 200c000.ecspi: probed
[   13.294257] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   13.294273] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[   13.296694] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   13.296711] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[   13.694286] 8021q: 802.1Q VLAN Support v1.8
[   13.818923] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   14.375476] ov5647_read_reg(mipi):reg=300a ret=-11
[   14.375489] camera ov5647_mipi is not found
[   14.701125] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   14.701145] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517)
[   14.939715] V4L2 device 'Mxc Camera' on IPU1_CSI1 registered as video0
[   14.942542] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   14.942560] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[   14.945552] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   14.945569] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517)
[   15.489365] mxc_v4l_open: Mxc Camera no sensor ipu0/csi1
[   15.831876] mousedev: PS/2 mouse device common for all mice
[   15.838007] xpad 2-1.1.2:1.0: xpad_prepare_next_out_packet - found pending output packet 0
[   15.838241] xpad 2-1.1.2:1.2: xpad_prepare_next_out_packet - found pending output packet 0
[   15.838745] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   15.838769] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[   15.839945] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   15.839962] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517)
[   15.840031] xpad 2-1.1.2:1.4: xpad_prepare_next_out_packet - found pending output packet 0
[   15.841390] xpad 2-1.1.2:1.6: xpad_prepare_next_out_packet - found pending output packet 0
[   15.841680] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   15.841692] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[   15.843195] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   15.843209] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517)
[   15.844540] usbcore: registered new interface driver xpad
[   15.850710] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   15.850727] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517)
[   15.851499] xpad 2-1.1.2:1.0: xpad_prepare_next_out_packet - found pending output packet 2
[   15.852717] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered
[   15.852730] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517)
[   15.860702] input: Xbox 360 Wireless Receiver as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input2
[  962.920554] xpad 2-1.1.2:1.0: xpad_prepare_next_out_packet - found pending output packet 2