I thought of doing variations for Duimon’s TIC-80 graphic next.
1 Like
I was thinking about doing it as a design update.
After messing around for a while, I figured the TIC-80 variations would be better to have only case color change with the the decal layer being a little darker.
It is probably also better to keep the original colors of the arcade speakers.
1 Like
Duimon TIC-80
TIC-80 Global Settings
----------------------
[Decal Layer]
Saturation: 0
Brightness: 20
TIC-80 Blue TIC-80 Green
----------- ------------
[Device Layer] [Device Layer]
Colorize: 1 Colorize: 1
Hue: 230 Hue: 110
Saturation: 200 Saturation: 200
Brightness: 150 Brightness: 150
Gamma: 1.25
TIC-80 Orange TIC-80 Purple
------------- -------------
[Device Layer] [Device Layer]
Colorize: 1 Colorize: 1
Hue: 4 Hue: 250
Saturation: 200 Saturation: 200
Brightness: 150 Brightness: 150
Gamma: 2.00 Gamma: 1.50
TIC-80 Red
----------
[Device Layer]
Colorize: 1
Hue: 360
Saturation: 200
Brightness: 150
Gamma: 1.50
1 Like
I have adjusted the shading of the speakers so…
Next Up
and other possible changes, if I think of any good ones.
1 Like
With the Mega Bezel being updated I am going to go ahead and make the proper changes first.
After looking at everything, it seems it is mainly the LEDs of the Monitor Variations and Gameboy Monitor that need parameter changes.
All the update fixes have been added to the repo
1 Like
I have been messing around with the Console Arcade 16x9 style a little. I think I have it looking closer to an Arcade Cabinet now with the marquee included at the top. It is all a work in progress right now.
2 Likes
Yep, I thought it would be best and keep the screen proportional to the cabinet bezel. I just went back to the old style and kept the trim on the sides and remove the color strip to keep the cabinet bezel plain. I did also add a marquee shadow to the top. This is what experimentation is for.
1 Like
After a day of playing around I literally just added the trim. I removed the color stripe since the secondary colors would be too much, so I just set the trim to the same color as the Background and added the stripe back. The round speakers will be included as an option.
4 Likes
I think everything is ready to keep making the parameter changes. I should be done with them in a few days.
2 Likes
I forgot about the 16x9 variations. I should mention that I turned down the Reflection than the previous post and went with Bezel Brightness + 30 = Reflect Global Amount.
1 Like
The new Console Arcade changes have been added to the repo. I didn’t redesign the DS and 3DS variations since I haven’t thought about them, but I will be doing them next. I also left out CyberLab and Megatron variations as well, for now.
2 Likes
Individual Variety Packs v1.8.0
To download the release updates follow the Github link at the top of this topic.
Console Arcade
-
Add
A. Gamecube variations and Yellowed SNES
B. Nintendo DS and 3DS variations -
Change
A. Gamecube Decal
B. Ambient Lighting
C. Complete Redesign
Duimon Graphics
- Add
A. Pocket Dream Console and TIC-80
B. Nintendo DS and 3DS Monitor variations
I made a logo for the Console Arcade, using Adobe Logo Maker, and will be adding it to the intros.
Edit: I thought it would be better for the Intro to have the same colors as the Arcade. It will, of course, take longer to complete this.
3 Likes
With @OrionsAngel updating some of his Console Overlays, I am going to double check everything and change to use the new ones, where necessary.