Welcome to the new crt guest advanced presets thread. Here I’ve taken @guest.r’s amazing crt advanced hd and ntsc shader combined with a variation of @Dogway’s grade shader and created Shadow Mask, Slot Mask and Aperture Grille crt shader presets for you all to enjoy.
“A mix of basic crt attributes that invokes a nostalgic vibe with a modern twist” is how I’d describe my presets.
Change your driver to “vulkan” in Settings/Drivers/Video if you haven’t already, if by chance you get a black screen while using my shaders then use the “glcore” driver instead. Exit RetroArch and then reopen it to make sure your new driver settings stick.
Make sure your slang shaders are up to date by going to Online Updater/Update Slang Shaders.
Download the shader pack below and extract it (In some cases you will also have to download guest.r’s latest shader pack as well as sometimes new features get added that I may take advantage of that are not yet available upstream by just updating your slang shaders. I’ll always include a link to get it under my shader pack download if needed to do so).
Move the “sonkun” folder over to your “shaders_slang” folder so that it looks like this:
And that’s it. You can now load up the shaders just like you would any other.
For this update you will also need guest.r’s latest shader update for my presets to display properly, you can grab it here.
Installation Guide for guest.r updated shaders:
Download and extract the pack.
Go to wherever you have your RetroArch shaders folder and then go to shaders_slang/crt then delete the 5 guest advance shaders in that folder which are “crt-guest-advanced-fast.slangp”, “crt-guest-advanced-fastest.slangp”, “crt-guest-advanced-hd.slangp”, “crt-guest-advanced-ntsc.slangp” and “crt-guest-advanced.slangp” and replace them with the 5 from the downloaded pack.
From the same crt folder go inside the “shaders” folder at the top and then look for a “guest” folder, delete that then replace it with the one from the downloaded pack that’s also in the “shaders” folder and that’s it, you’re done. You’ve now successfully updated guest.r shaders.
3 shader preset folders for 3 monitor types: 1080p, 1440p and 4k so whichever monitor you have, you can choose the right shader resolution for your monitor type.
Disclaimer - These presets were designed to be used on the three resolution types I’ve mentioned above only, not OLED, 720p or other random resolutions. If you use it on any type of display besides those 3 standard displays I may not be able to help if you run into any issues
If you are using a OLED display the first thing you should change is the Mask Layout setting in the Shader Parameters settings and try changing that to 1.00 (see sample image below)
That should help with lining the phosphors up properly on your OLED and make the overall picture look better.
63 shader presets to choose from per folder with 3 different phosphor types for USA, Japan and Pal that come in
white point temperature types.
Multiple cable types to choose from
Included are shader presets representing 4 cable types to choose from: rf, composite, s-video and rgb.
3 composite types to choose from
“Artifacts” version that has some fringing and rainbow artifacts depending on the game:
Megadrive rainbow version:
S-Video presets includes @Hyllian’s “sgenpt-mix multpass” shader to take care of checkerboard dithering and lite vertical line dithering. Here’s an example from Sega Saturn’s version of Mega Man X4:
No sgenpt-mix multpass:
Sgenpt-mix multpass turned on:
Sgenpt-mix multpass is still a work in progress shader so some games may produce weird graphic glitches depending on the game.
My recommended case use with these shaders is rf/composite for all systems from the 4th generation consoles and below (nes, snes, genesis, atari, turbografx etc.), s-video for 5th and 6th generation consoles (ps1, saturn, n64, dreamcast, ps2, gamecube) and rgb for arcade.
Also for nes cores I recommend changing the Palette setting. The two most popular cores are mesen and nestopia. For mesen you should use the “Original Hardware (by FirebrandX)” setting, for nestopia use the “NTSC hardware FBx” setting.
For Nintendo 64 mupen core with Parallel-rdp settings enabled I also recommend changing the “crop overscan” setting to 10 to help reduce weird moire patterns that appear on the screen with that setting at default 0.
RF sample pics:
Composite sample pics:
S-Video sample pics:
RGB sample pics:
Choose your preferred screen type
Choose from having a flat screen:
or curved screen:
Both curved and flat presets are designed to fit right inside overlays from The Bezel Project.
Also YouTuber Retro Crisis has made a couple videos showcasing my presets with a installation guide along with showcasing the dithering and transparency effects from the composite and svideo presets, you can check them out here:
I have a YouTube channel as well, not much there but you can check out some of my personal favorite video game osts/bgms there if you want.
I’ve also made a “fast” preset of my Slot Mask preset using the “crt-consumer.glsl” shader. You can check that out here. It’s for 1080p I’m not sure how it looks on other resolutions.
I hope you all enjoy.